• 한국재료학회지
• /
• 제25권6호
• /
• pp.288-292
• /
• 2015

New lead-free piezoelectric ceramics $0.96[\{Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}\}_{1-x}La_x(Ti_{1-y}Nb_y)O_3]-0.04SrTiO_3$ (BNKT-ST-LN, where $x=y=0.00{\leq}(x=y){\leq}0.015)$ were synthesized using the conventional solid-state reaction method. Their crystal structure, microstructure, and electrical properties were investigated as a function of the La and Nb (LN) content. The X-ray diffraction patterns revealed the formation of a single-phase perovskite structure for all the LN-modified BNKT-ST ceramics in this study. The temperature dependence of the dielectric curves showed that the maximum dielectric constant temperature ($T_m$) shifted towards lower temperatures and the curves became more diffuse with an increasing LN content. At the optimum composition (LN 0.005), a maximum value of remnant polarization ($33C/cm^2$) with a relatively low coercive field (22 kV/cm) and high piezoelectric constant (215 pC/N) was observed. These results indicate that the LN co-modified BNKT-ST ceramic system is a promising candidate for lead-free piezoelectric materials.

• 한국재료학회지
• /
• 제33권2호
• /
• pp.77-86
• /
• 2023

High-temperature oxidation of a Ni-based superalloy was analyzed with samples taken from gas turbine blades, where the samples were heat-treated and thermally exposed. The effect of Cr/Ti/Al elements in the alloy on high temperature oxidation was investigated using an optical microscope, SEM/EDS, and TEM. A high-Cr/high-Ti oxide layer was formed on the blade surface under the heat-treated state considered to be the initial stage of high-temperature oxidation. In addition, a PFZ (γ' precipitate free zone) accompanied by Cr carbide of Cr₂₃C₆ and high Cr-Co phase as a kind of TCP precipitation was formed under the surface layer. Pits of several ㎛ depth containing high-Al content oxide was observed at the boundary between the oxide layer and PFZ. However, high temperature oxidation formed on the thermally exposed blade surface consisted of the following steps: ① Ti-oxide formation in the center of the oxide layer, ② Cr-oxide formation surrounding the inner oxide layer, and ③ Al-oxide formation in the pits directly under the Cr oxide layer. It is estimated that the Cr content of Ni-based superalloys improves the oxidation resistance of the alloy by forming dense oxide layer, but produced the σ or µ phase of TCP precipitation with the high-Cr component resulting in material brittleness.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.35-43
• /
• 1999

Microstructures and dielectric properties of (Sr$\_$1-x/Ca$\_$x/) TiO$_3$-0.006Nb$_2$O$\_$5/ (0.05$\leq$x$\leq$0.2) boundary layer ceramics were investigated. The samples fired in a reducing atmosphere(N$_2$) were painted on the surface with CuO paste for the subsequent grain boundary diffusion, and then annealed at 1100$^{\circ}C$ for 2 hrs. The metal oxide of CuO infiltrated by thermal diffusion from surface of sample presents continuously in not grain but only grain boundary, and makes up thin boundary phase. The SEM photo, and EDAX revealed that CuO was penetrated rapidly into the bulk along the grain boundaries during the annealing. The average grain sizes is continuously increased as the content of substitutional Ca is increased from 5[mol%] to 15[mol%], but the average grain size of the sample with content of 20[mol%] Ca is slightly decreased. In the samples with content of 10∼15[mol%] Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss <0.3[%], and capacitance change rate as a function of temperature <${\pm}$10[%], respectively. All samples in this study exhibited dielectric relaxation with frequency as a functior of the temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.48-51
• /
• 1997

(Pb. La)TiO$_3$ thin films were fabricated by sol-gel Processing and spin-coated on the Pt substrate. The spin-coated PLT films were sintered at 75$0^{\circ}C$ for 5min by rapid thermal ann La content dependence of the electrical properties of the PLT thin films are discussed. Wit La mole% from 20 to 36mo1e%. the dielectric constant of the PLT thin films decreased f 570. P-E hysteresis loops changed from ferroelectric to paraelectric. and the charge storage charging time decreased. The Curie Point decreased with increasing La content. The leak density also decreased and La 36mo1% species shows mood characteristics less than 10- electric field 500 (KV/cm) Because of the broad range of composition-controlled ferroelectric PLT thin films are suitable for memory application.

• 멤브레인
• /
• 제25권2호
• /
• pp.191-201
• /
• 2015

$TiCo_xFe_{1-x}$(x=0.50~1.00)계 합금을 제조하고, 합금의 특성을 X-ray diffractometer (XRD), pressure composition temperature (PCT)곡선, scanning electron microscopy (SEM)에 의해 조사하였고, $TiCo_xFe_{1-x}$(x=0.50~1.00)-stainless steel (SS) 복합막에 대해 $H_2-N_2$ 혼합기체분리실험을 하였다. X-선 회절분석에 의하면 $TiCo_xFe_{1-x}$(x=0.50~1.00)계 합금의 결정구조는 TiCo와 같은 입방정구조이었다. $TiCo_xFe_{1-x}$(x=0.50~1.00)계 합금은 $120^{\circ}C$에서 hysteresis현상을 나타내었고, 합금 중 Fe의 양이 증가함에 따라 x=0.90~1.00과 0.50~0.55 범위에서는 hysteresis가 증가하였고, x=0.55~0.90 범위에서는 감소하였다. 가장 작은 hysteresis를 나타낸 합금은 $TiCo_{0.55}Fe_{0.45}$이었다. $120^{\circ}C$에서 $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS 복합막의 수소투과압력의 최저값은 $TiCo_{0.55}Fe_{0.45}$에서 2.5 atm을 나타내었고, 최대값은 $TiCo_{0.90}Fe_{0.10}$에서 10 atm을 나타내었다. $TiCo_xFe_{1-x}$(x=0.50~.00)-SS 복합막에 의하여 $120^{\circ}C$에서 $H_2-N_2$ 혼합기체를 분리하는 경우, 가장 우수한 복합막은 고압부의 수소투과압력이 2.5 atm으로 가장 낮고, hysteresis가 가장 작은 $TiCo_{0.55}Fe_{0.45}$-SS 복합막이었다.

• 한국식품영양과학회지
• /
• 제13권1호
• /
• pp.33-41
• /
• 1984

한국 근해에 서식하고 있는 각종(各種) 어류(魚類) 중(中) 활어(活魚) 및 선어(鮮魚) 상태의 적색육어(赤色肉魚) 8종(種)(곱상어, 전갱이, 우레기, 고등어, 눈퉁멸, 전어, 방어, 물고기), 자색육어(白色肉魚) 8종(種)(볼락, 쥐치, 흑돔, 복어, 노래미, 붕장어, 가자미, 조기)을 선택하여 선어육(鮮魚肉) 중(中)에 있어서의 TI(trypsin 활성저해물질, 혹은 trypsin indigestible substrate)의 존재 유무를 확인하고 소화율 정도를 알아 보았다. 또한 이들 선어를 저온저장($-5^{\circ}C$)하여 선도저하에 따른 TI 함량 및 소화율의 변화와의 관계를 알아보기 위해 VBN 및 TBA value도 함께 측정(測定)하였으며 그 결과(結果)는 다음과 같다. 적색육(赤色肉)어류의 Tl함량은 어종별에 따라 다소 차이를 나타내고 백색육어류는 비슷한 분포를 나타내고 있었으며 전체적으로 보아 백색육의 Tl함량이 적색육어류의 경우보다 높게 나타났다. 그러나 소화율은 어종별에 따라 별 차이를 내지 않은 83${\sim}$88%를 나타내었다. 부위별에 따른 Tl함량을 Hamerstrand 방법으로 측정하였을 때, 내장에 Tl함량이 가장 높았고(0.30mg/g) 표피에는 거의 없었으며 혈함육(血含肉)이 (0.21 mg/g) 보통육(普通肉) (0.15 mg/g) 보다 다소 높게 나타났다. 저온저장 ($-5^{\circ}C$) 중에 있어서의 TI 함량 및 소화율변화를 선도저하 및 지방산화와 함께 알아본 결과 저장기간이 경과함에 따라 TI, VBN, TBA value는 증가의 경향을 보였고 소화율은 감소의 경향을 나타내어 선도저하나 지방산화에 의해 상당한 영향을 받음을 알 수 가 있었으며 특히 지방함량이 소화율에 가장 많은 영향을 미치는 것으로 나타났다.

• 공업화학
• /
• 제19권5호
• /
• pp.554-558
• /
• 2008

전구체로서 알콕사이드[Tetraethyl orthosilicate (TEOS), Titanium (IV) isopropoxide (TiP)]를 사용하여 졸-겔 방법으로 전기방사에 적합한 졸을 제조한 후, $(1-x)SiO_2-(x)TiO_2$계 복합 나노섬유를 제조하였다. 제조된 광활성 무기나노섬유의 표면 및 구조적 특성은 X-선회절분석(XRD), 주사전자현미경(SEM), 투과전자현미경(TEM), 열중량분석 및 미분주사칼로리미터분석 (TGA-DSC), 적외선분광분석((FT-IR)을 통하여 확인하였다. $(1-x)SiO_2-(x)TiO_2$계에서 $TiO_2$ 양이 증가하면 전기방사된 복합섬유직경은 증가하였으며, 저온에서 안정한 아나타제 $TiO_2$ 결정에서 루타일로의 상전이는 $1000^{\circ}C$에서의 열처리 후에도 고루 분산되어 있는 $SiO_2$로 인해 $0.6SiO_2-0.4TiO_2$계까지는 아나타제상으로 존재하였다. $SiO_2-TiO_2$계 복합체 나노섬유의 광활성은 메틸렌블루 광분해 실험 및 UV-vis/DRS 분석을 통해 자외선 영역에서 나타남을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.460-465
• /
• 2001

(Ba$_{0.6-x}$Sr$_{0.4}$Ca$_{x}$)TiO$_3$(x=1.10,0.15,0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of he composition ratio and sintering temperature were studied. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around 102$0^{\circ}C$ due to the formation of the polycrystalline perovskite phase. The BSCT(50/40/10) specimen sintered at 150$0^{\circ}C$ showed the highest average grain size(18.25${\mu}{\textrm}{m}$). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 145$0^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively.ively.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.202-209
• /
• 2004

침전법 및 솔젤법에 의하여 10- l5 nm 및 500 nm 크기의 구형 TiO$_2$ 분말을 제조하고 수열합성법으로 50-70 nm 및 120-250 nm 크기의 침상 hydroxyapatite(이하 HA라 표기) 입자를 각각 제조한 다음, 두 분말의 조성비를 달리한 세 종류(HA/TiO$_2$비; 75/25, 50/50, 25/75wt%)의 HA/TiO$_2$ 복합분말을 planetary 볼밀로 혼합하여 각각 제조하였다. 복합분말을 탄소몰드에 넣고 hot-press를 사용하여 가압소결로 치밀체를 제조하였는데, 가압도중 대부분의 HA가 tricalcium phosphate(이하 TCP라 표기)로 분해되면서 $\beta$-TCP/TiO$_2$ 복합체가 제조되었다. 제조된 복합체의 미세구조와 소결밀도는 복합분말의 형태와 조성에 따라 변화하였는데, 입자가 균질하게 분산되어 있는 미세구조를 갖는 복합분말을 소결한 경우, 치밀한 소결체를 얻을 수 있었으며, 소결온도가 증가할수록 균질한 미세구조를 나타내었다. 또한 복합분말 내 HA 함량이 증가하면서 소결체의 입자크기가 증가한 반면, 소결밀도가 감소하고, 미세구조는 불균질하였다. 반대로 HA분말에 비하여 TiO$_2$분말의 함량이 큰 시편은 전체적으로 작은 입자크기와 균질한 미세구조를 나타냈으며, 소결밀도 또한 증가하였다.

• 한국환경과학회지
• /
• 제11권1호
• /
• pp.85-91
• /
• 2002

The effects of initial concentration of dissolved oxygen content, Cu(II) and EDTA in an aqueous Cu(II)-EDTA solution on $TiO_2$ photo-oxidation of EDTA were investigated using $TiO_2$ (Degussa P-25) and UV irradiation at $20{\circ}C$. In the presence of dissolved oxygen and/or Cu(II) the photo-oxidation rates of EDTA were enhanced. The rates linearly increased in the range of initial Cu(II) concentration below 1.79 mM, while abode this concentration those were kept constant. The trend or the EDTA photo-oxidation rates appeared to be akin to the Langmuir-Hinshelwood equation farm and the k values calculated were 0.05 mM/min for the free-EDTA system, and 0.17 mM/min far the Cu(II)-EDTA system. These meant the aqueous EDTA decomposition was enhanced due to weakening of the intra-molecular bond strength of EDTA by complexation with Cu(II) added. It was concluded the decomposition of aqueous EDTA by $TiO_2$ photo-oxidation was maximum in the presence of dissolved oxygen supplied by air purging and of Cu(II) with its concentration for 1:1 Cu(II)-EDTA complexation ratio.