Browse > Article
http://dx.doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.2.191

Preparation of TiCoxFe1-x(x=0.50~1.00) System Metal Membrane for Hydrogen Separation  

Jang, Kyu-young (Department of Chemistry, Sangmyung University)
Kang, Tae Beom (Department of Chemistry, Sangmyung University)
Publication Information
Membrane Journal / v.25, no.2, 2015 , pp. 191-201 More about this Journal
Abstract
We have studied on the preparation of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloy, the characteristics of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloy by X-ray diffractometer (XRD), pressure composition temperature (PCT) curve, scanning electron microscopy (SEM) and the $H_2-N_2$ gas mixture separation of $TiCo_xFe_{1-x}$(x=0.50~1.00)- stainless steel (SS) composite membranes. The formation of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys with cubic crystal same as TiCo was confirmed by X-ray diffractometer. $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys showed the hysteresis at $120^{\circ}C$. As the Fe content of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys increased, the hysteresis was increased both range x=0.90~1.00 and x=0.55~0.60, and the range x=0.55~0.90 gave decreased hysteresis. $TiCo_{0.55}Fe_{0.45}$ alloy was the one showed the lowest hysteresis among them. The lowest value of hydrogen permeation pressure of $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS composite membrane was $TiCo_{0.55}Fe_{0.45}$-SS composite membrane with the value of 2.5 atm at $120^{\circ}C$; otherwise, $TiCo_{0.90}Fe_{0.10}$-SS composite had the highest pressure value among the membranes with the value of 10 atm. $TiCo_{0.55}Fe_{0.45}$-SS composite membrane was the best to separate the $H_2-N_2$ gas mixture excellently among the $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS composite membranes since $TiCo_{0.55}Fe_{0.45}$ had the least hysteresis, and hydrogen permeation pressure was the lowest with value of 2.5 atm.
Keywords
metal membrane; hysteresis; $TiCo_xFe_{1-x}$; hydrogen; nitrogen;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 S. Uemiya, M. Kajiwara, M. Koseki, and T. Kojima, "Preparation of palladium composite membrane using CVD technique", J. Surf. Finish. Soc. Jpn., 45, 1310 (1994).   DOI
2 S. Morooka, S. C. Yan, S. Yokoyama, and K. Kusakabe, "Palladium membrane formed in macropores of support tube by chemical vapor deposition with crossflow through a porous wall", Sep. Sci., Tech., 30, 2877 (1995).   DOI
3 K. L. Yeung and A. Varma, "Novel preparation techniques for thin metal-ceramic composite membranes", AIChE J., 41, 2131 (1995).   DOI
4 G. Xomeritakis and Y. S. Lin, "Fabrication of a thin palladium membrane supported in a porous ceramic substrate by chemical vapor deposition", J. Membr. Sci., 120, 261 (1996).   DOI
5 J. Shu, B. P. A. Grandjean, S. Kaliaguine, P. Ciavarella, A. Giroir-Fendler, and J. A. Dalmon, "Gas permeation and isobutane dehydrogenation over very thin Pd/ceramic membranes", Can. J. Chem. Eng., 75, 712 (1997).
6 H. B. Zhao, K. Planz, J. H. Gu, A. W. Li, N. Storh, H. Brunner, and G. X. Xiong, "Preparation of palladium composite membranes by modified electroless plating procedure", J. Membr. Sci., 142, 147 (1998).   DOI
7 G. Y. Meng, L. Huang, M. Pan, C. S. Chen, and D. K. Peng, "Preparation and characterization of Pd and Pd-Ni alloy membranes on porous substrates by MOCVD with mixed metal ${\beta}$-diketone precursors", Mater. Res. Bull., 32, 385 (1997).   DOI
8 J. F. Deng, Z. Cao, and B. Zhou, "Catalytic dehydrogenation of ethanol in a metal-modified alumina membrane reactor", App. Catal. A (General), 132, 9 (1995).   DOI
9 G. Meunier and J. P. Manaud, "Thin film permeation membranes for hydrogen purification", Int. J. Hydrogen Energy, 17, 599 (1992).   DOI
10 J. P. Collins and J. D. Way, "Preparation and characterization of a composite palladium-ceramic membrane", Ind. Eng. Chem. Res., 32, 3006 (1993).   DOI
11 J. F. Deng and J. T. Way, "Formaldehyde production by catalytic dehydrogenation of methanol in inorganic membrane reactors", Appl. Catal. A (General), 109, 63 (1994).   DOI
12 G. Barbieri, V. Violante, F. P. D. Maio, A. Ciscuoli, and E. Drioli, "Methane steam reforming analysis in a palladium-based catalytic membrane teactor", Ind. Eng. Chem. Res., 36, 3369 (1997).   DOI
13 K. L. Yeung, J. M. Sebastian, and A. Varma, "Novel preparation of Pd/Vycor composite membranes", Catalysis Today, 25, 231 (1995).   DOI
14 J. Shu, B. P. A. Grandjean, and S. Kaliaguine, "Morphological study of hydrogen permeable Pd membranes", Thin Solid Films, 252, 26 (1994).   DOI
15 N. Jemaa, J. Shu, S. kaliaguine, and B. P. A. Grandjean, "Thin palladium film formation on shot peening modified porous stainless steel substrates", Ind. Eng. Chem. Res., 35, 973 (1996).   DOI
16 P. P. Mardilovich, Y She, Y. H. Ma, and M. H. Rei, "You have full text access to this contect defect-free palladium membranes on porous stainless- steel support", AIChE J., 44, 310 (1998).   DOI
17 S. Uemiya, N. Sato, H. Ando, Y. Kude, T. Matsuda, and E. Kikuchi, "Separation of hydrogen through palladium thin film supported on a porous glass tube", J. Membr. Sci., 56, 303 (1991).   DOI
18 O. Garneir, J. Shu, and B. P. A. Grandjean, "Membrane-assisted two-step process for methane conversion into hydrogen and higher hydrocarbons", Ind. Eng. Chem. Res., 36, 553 (1997).   DOI
19 S. Uemiya, N. Sato, H. Ando, Y. Kude, T. Matsuda, and E. Kikuchi, "Preparation of supported thin palladium-silver alloy membranes and their characteristics for hydrogen separation", Gas Sep. Purif., 5, 261 (1991).   DOI
20 Z. Y. Li, H. Maeda, K. Kussakabe, S. Morooka, H. Anzai, and S. Akiyama, "Preparation of palladium-silver alloy membranes for hydrogen separaion by the spray pyrolysis method", J. Membr. Sci., 78, 247 (1993).   DOI
21 E. Gobina and R. Hughes, "Ethane dehydrogenation using a high-temperature catalytic membrane reactor", J. Membr. Sci., 90, 11 (1994).   DOI
22 Y. Cao, B. S. Liu, and J. F. Deng, "Catalytic dehydrogenation of ethanol in Pdsingle bondM/${\gamma}$-Al2O3 composite membrane reactors", Appl. Catal. A (General), 154, 129 (1997).   DOI
23 M. L. Trudeau, K. J. Bryden, M. Braunovic, and J. Y. Ying, "Fretting studies of nanocrystalline Pd, Pd-Ag and Pd-Y films", Nanostruct. Mater., 9, 759 (1997).   DOI
24 V. M. Gryaznov, O. S. Serebryannikova, Y. M. Seov, M. M. Ermilova, A. N. Karavanov, A. P. Mischenko, and N. V. Orekhava, "Preparation and catalysis over palladium composite membranes", Appl. Catal. A, 96, 15 (1993).   DOI
25 H. Sakaguchi, H. Nagai, G. Adachi, and J. Shiokawa, "Hydrogen separation using LaNi5 films", J. Less-Common metals, 126, 83 (1986).   DOI
26 M. Chai, Y. Yamashita, M. Machida, K. Eguchi, and H. Arai, "Catalytic platinum-based membrane reator for removal $H_2S$ from natural gas streams", J. Membr. Sci., 94, 111 (1994).   DOI
27 B. S. Liu, H. Li, Y. Cao, J. F. Deng, C. Sheng, and S. Zhou, "Preparation and characterization of Ni-P amorphous alloy/ceramic composite membrane", J. Membr. Sci., 135, 33 (1997).   DOI
28 M. R. Chai, Y. Yamashita, M. Machida, K. Eguchi, and H. Arai, "Preparation and characterization of metal-dispersed alumina membranes for selective separation of hydrogen", J. Membr. Sci., 97, 199 (1994).   DOI
29 W. Li, G. X, Xiong, J. H. Gu, and L. B. Zheng, "Preparation of Pd/ceramic composite membrnae 1. Improvement of the conventional preparation technique", J. Membr. Sci., 110, 257 (1996).   DOI
30 S. K. Lee and S. R. Hong, "Preparation and gas permeation properties of PDMS-HNT nanotube composite membrane", Membr. J., 24, 185 (2014).   DOI
31 S. R. Hong and H. K. Lee, "Preparation and permeation characterisitcs of PTMSP-Silica/PEI composite membrane", Membr. J., 18, 146 (2008).
32 Y. I. Jung and H. K. Lee, "Hydrocarbon gas permeation characteristics of PTMSP/LDH composite membranes", Membr. J., 24, 423 (2014).   DOI
33 J. Shu, B. P. A. Grandjean, E. Ghali, and S. kaliaguine, "Simultaneous deposition of Pd and Ag on prous stainless steel by electroless plating synthesis and hydrogen", J. Membr, Sci., 77, 181 (1993).   DOI
34 A. L. Athayde, R. W. Bake, and P. Nguyen, "Metal composite membranes for hydrogen separation", J. Membr. Sci., 94, 299 (1994).   DOI
35 H. Amandusson, L. G. Ekedahl, and H. Dannetun, "Hydrogen permeation through surface modified Pd and PdAg membranes", J. Membr. Sci., 193, 35 (2001).   DOI
36 J. Shu, B. E. W. Bongondo, B. Bp. A. Grandjean, A. Adnot, and S. kaliaguine, "Catalytic palladium-based membrane reactors: A review", Can. J. Chem. Eng., 69, 1036 (1991).   DOI
37 V. Jayaraman and Y. S. Lin, "Synthesis and hydrogen permeation properties of ultrathin palladium-silver alloy membranes", J. Membr. Sci., 104, 251 (1995).   DOI
38 S. E. Nam and K. H. Lee, "Hydrogen separation by Pd alloy composite membranes: introduction of diffusion barrier", J. Membr. Sci., 192, 177 (2001).   DOI
39 J. Shu, A. Adnot, B. P. A Grandjean, and S Kaliaguine, "Structurally stable composite Pd-Ag alloy membranes: Introduction of a diffusion barrier", Thin Solid Film, 286, 72 (1996).   DOI
40 S. Uemiya, T. Matsuda, and E. Kikuchi, "Hydrogen permeable palladium-silver alloy membrane supported on prous ceramics", J. Membr. Sci., 56, 315 (1991).   DOI
41 G. Xomeritakis and Y. S. Lin, "Fabrication of thin metallic membranes by MOCVD and sputting", J. Membr. Sci., 133, 217 (1997).   DOI
42 K. j. Bryden and J. Y. Ying, "Bulletin of the government industrial research institutetute", Mater. Sci. Eng. A, 204, 140 (1995).   DOI
43 M. Konno, M. Shindo, S. Sugawara, and S. Saito, "A composite palladium and porous aluminium oxide membrane for hydrogen gas permeation", J. Membr, Sci., 37. 193 (1988).   DOI