• Journal of the Korean Vacuum Society
• /
• v.22 no.1
• /
• pp.13-19
• /
• 2013

It is expected that progress in building-integrated photovoltaic (BIPV) systems, improving the functionality and design of buildings, will be accelerated in the coming years. While the dye sensitized solar cell is considered one of the most important technologies in the BIPV field, the transparent silicon based thin film solar cell fabricated by thin film processes has drawn attention as a novel alternative. When the selective transmitting layer is applied to the solar cell, the conversion efficiency is improved due to the re-reflection of infrared light into an absorber layer with the transmission of visible light through the solar cell. In this work, we prepared Al-Ti based oxide thin films using cost-effective sputter deposition and examined their selective transmitting characteristics with various compositions. The transmittance and reflectance of the Al-Ti based oxide thin film changed with the variation of its composition, and the selective transmitting property was observed in the sample with the 25 nm-thick AlTiO layer. It is considered that the realization of transparent solar cells and the improvement of their conversion efficiency can be achieved by introducing the Al-Ti based selective transmitting layer.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.353-356
• /
• 2001

The relation between the flocculation and dispersion of metal oxide powders and the properties of solvents, such as dielectric constant and solubility parameter, was investigated for TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$particles. The particle size and median diameter of these metal oxides were measured in many organic solvents, from which the effect of solvents on the flocculation and dispersion of metal oxide powders was considered. The metal oxide powders of TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$tend to disperse in a solvent of higher polarity, whereas they are apt to flocculate in a solvent of low dielectric constant, because the Hamaker constant between the particles becomes larger in such a solvent. There we, however, some solvents that do not obey these tendencies. It is possible to evaluate the flocculation and dispersion of these metal oxide powders in many solvents by using numeral balances of Hansen’s three-dimensional solubility parameter (f$_{d}$, f$_{p}$ and f$_{h}$). There exists a solvent giving the optimal dispersion for each metal oxide, and the optimal dispersion point of f$_{d}$, f$_{p}$ and f$_{h}$ is determined by the combination of various metal oxide powders and solvents.nts.nts.nts.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1117-1123
• /
• 1996

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.179-180
• /
• 2002

In this study. the friction transition diagram based on the effect of oxide layer formation on contact surface between TiN coated steel ball and uncoated steel disk was constructed. From the diagram. it can be seen that as the contact load increases. the contact number of cycle at the beginning of oxide layer formation decreases linearly and as the coating thickness increases and the surface roughness of steel disk increases under same contact load. that increases. For the coated ball specimen, a AISI 52100 steel ball was used and AISI 1045 steel was used for the disk counter part.

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.44-50
• /
• 2007

The oxidation behavior of commercial pure titanium is investigated in the temperature range of $727^{\circ}C{\sim}950^{\circ}C$ in mixed gases. The weight change is measured by TGA during oxidation in mixed gases. The oxidation behavior indicated by weight gain or the growth of oxide layer is based on the linear rate law at high temperatures. The structure of the oxide scale formed during oxidation is analysed by optical microscopy, electron probe microanalyzer, scanning electron microscope and x-ray diffraction. Oxide scales have a $TiO_2$ structure, and are constituted with multi-layered or two layered porous external one and a dense internal one. Ti-O solid solution region is formed at the interface of metal and scale layer. The formation of oxide scale is influenced by the oxidation temperature, time, crystal structure and the condition of atmosphere.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.438-443
• /
• 2007

Titanium oxide films were deposited by the HCP (hollow cathode plasma) reactor at room temperature. With results of simulation about HCP reactor, the temperature profile is uniform on substrate regardless of the heat generation at cathode. The velocity profile on the surface of substrate is more uniform with increasing the gap between cathode and substrate, and surface roughness was decreased with increasing the gap between cathode and substrate. We could confirm that the composition of oxide increased with RF-power, and the ratio of O to Ti in the films was about 2 : 1 at RF-power of 240 watt and distance between cathode and substrate of 3 cm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.50-50
• /
• 2003

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.50-50
• /
• 2001

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.60-60
• /
• 2001

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.196-198
• /
• 1995