• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.515-518
• /
• 2011

In this work, we designed and fabricated a multilayer thin film Pb(Zr,Ti)$O_3$ cantilever with a Si proof mass for low frequency vibration energy harvesting applications. A mathematical model of a mu lti-layer composite beam was derived and applied in a parametric analysis of the piezoelectric cantilever. Finally, the dimensions of the cantilever were determined for the resonant frequency of the cantilever. W e fabricated a device with beam dimensions of about 4,930 ${\mu}M$ ${\times}$ 450 ${\mu}M$ ${\times}$ 12 ${\mu}M$, and an integrated Si proof mass with dimensions of about 1,410 ${\mu}M$ ${\times}$ 450 ${\mu}M$ ${\times}$ 450 ${\mu}M$. The resonant frequency, maximum peak voltage, and highest average power of the cantilever device were 84.5 Hz, 88 mV, and 0.166 ${\mu}Wat$ 1.0 g and 23.7 ${\Omega}$, respectively. The dimensions of the cantilever were determined for the resonance frequency of the cantilever.

• Journal of Periodontal and Implant Science
• /
• 제50권6호
• /
• pp.392-405
• /
• 2020

Purpose: Titanium implants are widely used in the treatment of dentition defects; however, due to problems such as osseointegration failure, peri-implant bone resorption, and periimplant inflammation, their application is subject to certain restrictions. The surface modification of titanium implants can improve the implant success rate and meet the needs of clinical applications. The goal of this study was to evaluate the effect of the use of porous titanium with a chitosan/hydroxyapatite coating on osseointegration. Methods: Titanium implants with a dense core and a porous outer structure were prepared using a computer-aided design model and selective laser sintering technology, with a fabricated chitosan/hydroxyapatite composite coating on their surfaces. In vivo and in vitro experiments were used to assess osteogenesis. Results: The quasi-elastic gradient and compressive strength of porous titanium implants were observed to decrease as the porosity increased. The in vitro experiments demonstrated that, the porous titanium implants had no biological toxicity; additionally, the porous structure was shown to be superior to dense titanium with regard to facilitating the adhesion and proliferation of osteoblast-like MC3T3-E1 cells. The in vivo experimental results also showed that the porous structure was beneficial, as bone tissue could grow into the pores, thereby exhibiting good osseointegration. Conclusions: Porous titanium with a chitosan/hydroxyapatite coating promoted MC3T3-E1 cell proliferation and differentiation, and also improved osseointegration in vitro. This study has meaningful implications for research into ways of improving the surface structures of implants and promoting implant osseointegration.

• 광물과 암석
• /
• 제36권4호
• /
• pp.273-288
• /
• 2023

구봉 금-은 광상은 과거 한국에서 운산 광상, 대유동 광상, 광양 광상 등과 함께 가장 큰 금-은 광상으로써 선캠브리아기의 변성퇴적암류내에 발달된 열극대를 충진한 8개조의 석영맥(조산형과 intrusion-related형이 혼합된 광상)으로 구성된다. 대한광업진흥공사는 1989년 수행된 시추에서 깊이 -728 ML(시추 90-12공)에서 맥폭 0.9 m의 석영맥(6호맥, 27.9 g/t Au)을 착맥하였으며 2004년 6호맥의 재개발 가능성 검토를 위해 시추(04-1)를 수행하였다. 저자는 2004년 04-1 시추공에서 채취된 모암, 모암변질 및 석영맥 시료들을 이용하여 녹니석과 백색운모의 산상과 화학조성을 연구하였다. 연구된 시료들에서 관찰되는 모암변질작용은 녹니석화작용, 견운모화작용, 규화작용 및 황철석화작용 등이다. 깊이 -275 ML의 광화대에서 관찰되는 녹니석과 백색운모는 모암변질대와 석영맥에서 석영, 칼리장석, 방해석, 금홍석 및 황철석과 함께 산출되며 깊이 -779 ML의 광맥(6호맥)에서 관찰되는 녹니석과 백색운모는 모암변질대와 석영맥에서 석영, 방해석, 인회석, 저어콘, 금홍석, 티탄철석, 자류철석 및 황철석과 함께 산출된다. 깊이 -779 ML에서 산출되는 녹니석은 깊이 -275 ML에서 산출되는 녹니석보다 Al, Mg 원소들 함량이 높고 Si, Fe 원소들 함량이 낮으며 더불어 이들 깊이에서 산출되는 녹니석은 이론적인 녹니석보단 약간 Si 함량이 높다. 깊이 -275 ML에서 산출되는 녹니석의 화학조성 변화는 주로 팬자이틱 또는 Tschermark 치환[Al^3+,VI+Al^3+,IV <-> (Fe²⁺ 또는 Mg²⁺)^VI+(Si⁴⁺)^IV]에 의해 일어났지만 깊이 -779 ML에서 산출되는 녹니석의 화학조성 변화는 팔면체적 Fe²⁺ <-> Mg²⁺ (Mn²⁺) 치환 메카니즘에 의해 일어났음을 알 수 있다. 깊이 -279 ML과 깊이 -779 ML에서 산출되는 백색운모의 층간 양이온(K+Na+Ca+Ba+Sr)은 각각 0.76~0.82 apfu, 0.72~0.91 apfu로써 다소 낮은 함량을 갖지만 팔면체 자리의 양이온(Fe+Mg+Mn+Ti+Cr+V+Ni) 함량은 각각 2.09~2.13 apfu, 2.06~2.14 apfu로써 약간 높은 함량을 갖는다. 깊이 -279 ML에서 산출되는 백색운모의 화학조성 변화는 팬자이틱 또는 Tschermark 치환[(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ 또는 Mg²⁺)^VI+(Si⁴⁺)^IV]과 illitic 치환 및 직접적인 (Fe³⁺)^VI <-> (Al³⁺)^VI 치환 메카니즘에 의해 일어났지만 깊이 -779 ML에서 산출되는 백색운모의 화학조성 변화는 팬자이틱 또는 Tschermark 치환[(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ 또는 Mg²⁺)^VI+(Si⁴⁺)^IV] 및 직접적인 (Fe³⁺)^VI <-> (Al³⁺)^VI 치환 메카니즘에 의해 일어났음을 알 수 있다.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.39-51
• /
• 2012

Aerosol slurry samples were collected in 60-min interval using Korean Semi-continuous Elements in Aerosol Sampler (KSEAS) between May 19 and June 6, 2010 at an urban site of Gwangju. The $PM_{2.5}$ samples were collected with a flow rate of 16.7 L/min and particles are grown by condensation of water vapor in a condenser maintained at ${\sim}5^{\circ}C$ after saturation by direct injection of steam. The resulting droplets are collected in a liquid slurry with a airdroplet separator. Concentrations of 16 elements (Al, Fe, Mn, Ca, K, Cu, Zn, Pb, Cd, Cr, Ti, V, Ni, Co, As, Se) in the collected slurry samples were determined off-line by ICP-MS. KSEAS sample analysis encompassed the sampling periods for which 24-hr average elemental species concentrations were calculated for comparison with those derived from 24-hr integrated filter samples. Relationship between elemental species measured by two methods indicated high correlation coefficients (r), mostly greater than r of 0.80. However, we note that concentrations of Al, K, Ca, Mn, and Fe, which are often associated with crustal elemental particles, in the KSEAS samples, were substantially lower (1.4~11 times) than those found in the typical filter-based samples. This discrepancy is probably due to difficulties in transferring insoluble dust particles to the collection vials in the KSEAS. Temporal profiles of elemental concentrations indicate that some transient events in their concentrations are observed over the sampling periods. For the elemental species studied, atmospheric concentrations during the transient events increased by factors of 4 in Mn~80 in Zn, compared to their background levels. Principle component analyses were applied to the hourly KSEAS data sets to identify sources affecting the concentrations of the metal constituents observed. In this study, we conclude that hourly measurements for particle-bound elemental constituents were extremely useful for revealing the short-term variability in their concentrations and developing insights into their sources.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.329.2-329.2
• /
• 2014

지난 수년간 태양전지의 광전변환효율을 높이기 위해 자가 조립된 InAs 또는 GaSb와 같은 양자점을 GaAs 단일 p-n 접합에 적용하는 연구를 개발해 왔다. 그러나 양자점의 흡수 단면적에 의한 광 흡수도는 양자점층을 수십 층을 쌓으면 증가하지만 활성층에 결함을 생성시킨다. 생성된 결함은 운반자트랩으로 작용하여 태양전지의 광전변환효율을 감소시킨다. 본 실험에서는 양자점이 적용된 태양전지와 적용되지 않은 태양전지의 광전변환 효율을 비교하고, 깊은준위 과도용량 분광법을 이용하여 결함상태를 측정 및 비교함으로써, 활성층 내부에 생성된 결함이 광전변환 효율에 미치는 영향을 분석하였다. 소자구조는 분자선 증착 방법을 이용하여, 먼저 n+-형 GaAs기판위에 n+-형 GaAs를 250 nm 증착한 후, 도핑이 되지 않은 GaAs활성층을 $1{\mu}m$ 두께로 증착하였다. 마지막으로 n+ 와 p+-형 GaAs를 각각 50, 750 nm 증착함으로써 p-i-n구조를형성하였다. 여기서, n+-형 GaAs 과 p+-형 GaAs의 도핑농도는 동일하게 $5{\times}1018cm-3$로 하였다. 또한 양자점을 태양전지 활성층에 20층을 형성하였다. 이때 p-i-n 태양전지 와 양자점 태양전지의 광전변환 효율은 각각 5.54, 4.22 % 를 나타내었다. p-i-n 태양전지의 개방 전압과 단락전류는 847 mV, 8,81 mA이며 양자점 태양전지는 847 mV, 6.62mA로 확인되었다. 태양전지의 전기적 특성을 측정하기 위해 소자구조 위에 Au(300nm)/Pt(30nm)/Ti(30nm)의 전극을 전자빔증착장치로 증착하였으며, 메사에칭으로 직경 $300{\mu}m$의 태양전지 구조를 제작하였다. 정전용량-전압 특성 및 깊은준위 과도용량 분광법을 이용하여 태양전지의 결함분석 및 이에 따른 광전변환 특성인자와의 상관관계를 논의할 것이다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E1호
• /
• pp.1-7
• /
• 2001

The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.869-873
• /
• 2004

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient, piezoelectric, and a photo refractive properties. In this study, SBN60(x=0.6) thin film was manufactured by ion beam sputtering technique. Using the prepared SBN60 target in $Ar/O_2$ atmosphere as-deposited SBN60 thin film on Pt(100)/$TiO_2/SiO_2/Si$ substrate crystallization and orientation behavior as well as electric properties of SBN60 thin film were examined. SBN60 deposition up to $3000{\AA}$ in thickness, SBN60 thin film was heat-treated at $650^{\circ}C{\sim}800^{\circ}C$. The orientation was shown primarily along (001) plane from XRD pattern where working pressure was $4.3{\times}10^{-4}$ torr. The deposited layer was uniform, preferred orientatin and crystallization behavior resulted in the change of $O_2$ ratio was observed. In electric propertie of Pt/SBN60/Pt thin film capacitor remnant polarization (2Pr) value was $10{\mu}C/cm^2$, the coercive filed (Ec) 50 kV/cm, and the dielectric constant 615, respectively.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권4호
• /
• pp.97-101
• /
• 2000

In this study, two kinds of barium strontium titanate (BST) samples were prepared. One is a conventional BST film that is sputtered in a mixture of argon and oxygen. The other is a nitrogen-incorporated BST film that is sputtered in a mixture of oxygen and intentionally added nitrogen instead of argon gas. The structural properties of both of the BST films had not changed significantly with the species of sputtering gas. However, the leakage current of BST films sputtered at ($N_2$+O$_2$) atmosphere was lower than those sputtered at (Ar +O$_2$) atmosphere: 1.9$\times$10$^{-8}$ A/cm$^2$ at 2V for the films prepared at (Ar +O$_2$) atmosphere and 8.6$\times$10$^{-9}$ A/cm$^2$ for the films at ($N_2$+O$_2$) atmosphere. From an XPS analysis, it has been found that nitrogen atoms are incorporated in BST films with a concentration of 1.92 at% and form a certain oxynitride phase. It is proposed that nitrogen atoms are able to fill the oxygen vacancies of BST films during sputtering process, and then the leakage current reduces due to a decrease in the vacancies. The BST films sputtered at ($N_2$+O$_2$) atmosphere have superior electrical properties to the films sputtered at (Ar +O$_2$), without any significant structural changes.

• 대한치과기공학회지
• /
• 제37권1호
• /
• pp.23-29
• /
• 2015

Purpose: The selective laser melting (SLM) process for dentistry, which is one of the additive manufacturing technologies (AM) allows for rapid production of a three-dimensional model with complex shape by directly melting metal powder. This process generates detailed items of a three-dimensional model shape through consolidation of a thin powder layer by utilizing both selective melting and laser beam simultaneously. In regard to SLM process, Fe-base powder, Ti-6AI-4V powder, AI-base powder, etc. have been researched. It is believed that the aforementioned technologies will be widely utilized in manufacturing metal parts using metal powder of raw material. This study chose Ni-Cr-Mo metal powder in order to manufacture metal powder materials that would be used in the selective laser melting for dentistry. Methods: This study manufactured metal powder using mechanical alloying technique (MA) among those metal powder manufacturing techniques. Moreover, this study aimed to utilize the metal powder manufactured after observing the characteristics of powder as preliminary data of Ni-Cr-Mo metal powder. This study could obtain the following conclusions within the experimental limitations. Results: As a result of mechanically alloying Ni-Cr-Mo powder over time, its mean particle size was $66.93{\mu}m$ $54.4{\mu}m$ and $45.39{\mu}m$ at 10h, 20h and 30h, respectively. The gtain form of metal powder by mechanical alloying technique was a sponge-like shape of irregular plate; however, the gtain form manufactured by high-pressure water aromization process had the following three types: globular type, chain type and oval type. Conclusion: This study found $37.65{\mu}m$ as the mean particle size of Ni-Cr-Mo metal powder, which was manufactured using water atomization technique under the following conditions: water atomization flux of 300 liter/min, hydraulic pressure of $400kgf/cm^2$ and injection angle of $45^{\circ}$. This study confirmed that the grain form of powder (solid particle form) would vary depending on the manufacturing process.

• 천문학회보
• /
• 제38권2호
• /
• pp.87.2-87.2
• /
• 2013

We studied a fine-scale half ring-like structure around a pore seen from the high spectral and the high spatial resolution data. Our observations were carried out using the Fast Imaging Solar Spectrograph (FISS) and the InfraRed Imaging Magnetograph (IRIM) installed at the 1.6 meter New Solar Telescope of Big Bear Solar Observatory (BBSO) on 2012 July 19. During the observations, we found a fine-scale half ring-like structure located very close to a pore (~0.4 arcsec apart from the pore). It was seen in the far wing images of the $H{\alpha}$ and Ca II $8542{\AA}$ lines, but it was not seen in the line center images of two lines. The length of the structure is about 4200 km and the width is about 350 km. We determined its line-of-sight velocity using the Doppler shift of the centroid of the Ti II line ($6559.6{\AA}$, close to the $H{\alpha}$ line) and determined horizontal velocity using the NAVE method. we also investigated the magnetic configurations using the Stokes I, Q, U, and V maps of the IRIM. As a results, we found that it has a high blue-shift velocity (~2km) faster than the photospheric features and has a strong horizontal component of the magnetic field. Based on our findings, we suggest that it is associated with small flux emergence, which occurs very close to the pore. Even though it is very small structure, this kind of magnetic configuration can be in chare of the upper chromosphere heating, especially above the pore.