• Journal of Powder Materials
• /
• v.10 no.2
• /
• pp.123-128
• /
• 2003

$TiO_2$ nanopowder was synthesized by chemical vapor condensation (CVC) process and its photocatalytic property depending on microstructure was considered in terns of decomposition rate of organic compound. In order to control microstructure of $TiO_2$ nanopowder such as particle size and degree of agglomeration, precursor flow rate representing number concentration was changed as a process variable. In TEM observation, spherical $TiO_2$ nanoparticles with average size of 20 nm showed gradual increases in particle size and degree of agglomeration with increase of precursor flow rate. Also decomposition rate of organic compound increased with decreasing precursor flow rate. Thus, it was concluded that photocatalytic property was enhanced by targe surface area of disperse $TiO_2$ nanoparticles synthesized at lower precursor flow rate condition in CVC process.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.2
• /
• pp.1-6
• /
• 2004

In Bok-Jeong water treatment plant, chlorination is the only technique used for disinfection of drinking water. This disinfecting treatment leads to the formation of trihalomethanes (THMs). This study was carried out to investigate the possibility of improving removal efficiency of THM precursor in the conventional water treatment processes by $TiO_2$ photocatalytic oxidation. Removal efficiencies of DOC, $UV_{254}$, THMFP were low in the conventional water treatment processes. With application of $TiO_2$ photocatalyst, DOC, $UV_{254}$, THMFP were reduced more effectively. As the $TiO_2$ photocatalytic reaction time increased, the removal efficiencies of DOC, $UV_{254}$, THMFP were increased. The $TiO_2$ photocatalytic removal efficiencies of DOC, $UV_{254}$, THMFP were increased with increasing $TiO_2$ dosage. However, over 0.6g/l of $TiO_2$ dosage, the efficiency reached a plateau.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.32-36
• /
• 2000

Pyrolytic preparations of Ti-Al-N ceramics from three blended precursors were investigated. The precursors were prepared stirring ($HA1N^{i}Pr_m$ and an aminolysis product of $Ti(NMe_2)_4$ with $MeHNCH_2CH_2$NHMe in $C_6/H_6$ . IR and $^1H\;NMR $analyses suggested that essentially no Ti-N-Al bonds were present in the precursors. Pyrolysis of the precursors under $NH_3-N_2$led to the formation of brown solids with ceramic yields of about 30%, and the Ti-Al ratios in the pyrolyzed products were close to those of the precursors. XRD analysis of the pyrolyzed product from the precursor with Ti:Al=5:1 indicated the formation of a NaCl-type compound as the only crystalline phase. Pyrolysis of the precursor with Ti:Al=2:1 led to the formation of AlN besides the major NaCl-type compound. A ceramic composite containing AlN and the NaCl-type compound was formed by pyrolysis of the precursor with Ti:Al=1:2.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.100-100
• /
• 2010

Hydrophilic $TiO_2$ films were deposited on slide glasses using titanium tetraisopropoxide (TTIP) as a precursor by metal-organic chemical vapor deposition (MOCVD). The temperature of substrate was $400^{\circ}C$ and the temperatures of precursor were kept at $75^{\circ}C$ (sample A) and $60^{\circ}C$ (sample B) during the $TiO_2$ film growth. The deposited $TiO_2$ films were characterized by contact angle measurement and uv/vis spectroscopy. The result show that sample B has very low contact angle of almost zero due to superhydrophilic $TiO_2$ surface and transmittance is $76.85%{\pm}1.47%$ at the range of 400 - 700 nm. So, this condition is very optimal for hydrophilic $TiO_2$ film deposition. However, when the temperature of precursor is lower is lower than $50^{\circ}C$ or higher than $75^{\circ}C$, $TiO_2$ could not be deposited on the substrate and cloudy $TiO_2$ film was formed due to low precursor temperature and the increase of surface roughness, respectively.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.75-80
• /
• 1999

The formation of $n-TiO_2$ powder by oxidation of Ti-ethoxied vapor in a flat flame burner reactor maintained under 20 torr has been studied. The produced powder were characterized in terms of crystal structure, chemical composition by XRD and TEM. The results showed that the powder consisted of loose agglomerated anatase and rutile particles and their size were about 10 nm and 20 nm, respectively. In the course of synthesis, changes of the flame color were happened to each condition during heating up the bubbler. The flame color transition phenomena reveled that a critical precursor delivery rate was needed for the powder formation (obtainable powder yield). The critical precursor delivery rate was estimated by a simple function of the bubbler temperature and the carrier gas flow rate. The critical precursor delivery rate was reviewed as an important variable of the nanopowder synthesis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.122-125
• /
• 1995

Using metalorganic deposition technique, $La_2Ti_2O_{7}$ precursor solution was deposited on platinium coated SiO$_2$/SI(100) substrates by spin-coating process. Crystalline and crack-free films of ∼0.2$\mu\textrm{m}$ thickness were successfully fabricated on the above substrate from four different types of $La_2Ti_2O_{7}$ precursor solutions by proper heat treatment in the temperature range of $700^{\circ}C$∼$1200^{\circ}C$. Microstructure and X-ray diffraction analysis of $La_2Ti_2O_{7}$ thin film showed that the crystallization temperature and the preferred orientation of $La_2Ti_2O_{7}$ thin film were strongly dependent on the precursor used.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2333-2337
• /
• 2007

Nanoporous TiO2 and ZrO2 thin films were spin-coated using a surfactant-templated approach from Pluronic P123 (EO20PO70EO20) as the templating agent, titanium alkoxide (Ti(OC4H9)4) as the inorganic precursor, and butanol as a the solvent. The control of the electronic structure of TiO2 is crucial for its various applications. We found that the band gap of the hybrid nanoporous thin films can be easily tuned by adding an acetylacetonestabilized Zr(OC4H9)4 precursor to the precursor solution of Ti(OC4H9)4. Pores with a diameter of 5 nm-10 nm were randomly dispersed and partially connected to each other inside the films. TiO2 and ZrO2 thin films have an anatase structure and tetragonal structure, respectively, while the TiO2-ZrO2 hybrid film exhibited no crystallinity. The refractive index was significantly changed by varying the atomic ratio of titanium to zirconium. The band gap for the nanoporous TiO2 was estimated to 3.43 eV and that for the TiO2-ZrO2 hybrid film was 3.61 eV.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.365-370
• /
• 2003

The phase development process of $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics is not clearly known and frequently accompanies second phases which deteriorate dielectric properties. In synthesizing $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics, in order to trace the reaction sequence during conventional solid-state reaction in BaO-Ti $O_2$ system, different barium sources of BaC0$_3$ and BaTi0$_3$ precursor were used as starting materials. From the analysis of XRD patterns, different secondary phases could be identified depending on the barium source used, which might mean that the equilibrium phases in BaO-Ti $O_2$ system are very difficult to be synthesized. Because the BaTi0$_3$ precursor provides short diffusion paths of ions, the system revealed less secondary phases during solid state reaction. In synthesizing BaO-xSm$_2$0$_3$-4.5Ti0$_2$ system using different barium sources, different secondary phases were developed also. Microstructure and dielectric properties were examined and discussed in terms of secondary phase development.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.1
• /
• pp.56-61
• /
• 2009

STATEMENT OF PROBLEM. The success of titanium implants is due to osseointegration or the direct contact of the implant surface and bone without a fibrous connective tissue interface. PURPOSE. The purpose of this study was to evaluate the osteoblast precursor response to titanium-10 tantalum-10 niobium(Ti-Ta-Nb) alloy and its sputtered coating. MATERIAL AND METHODS. Ti-Ta-Nb coatings were sputtered onto the Ti-Ta-Nb disks. Ti6-Al-4V alloy disks were used as controls. An osteoblast precursor cell line, were used to evaluate the cell responses to the 3 groups. Cell attachment was measured using coulter counter and the cell morphology during attachment period was observed using fluorescent microscopy. Cell culture was performed at 4, 8, 12 and 16 days. RESULTS. The sputtered Ti-Ta-Nb coatings consisted of dense nanoscale grains in the range of 30 to 100 nm with alpha-Ti crystal structure. The Ti-Ta-Nb disks and its sputtered nanoscale coatings exhibited greater hydrophilicity and rougher surfaces compared to the Ti-6Al-4V disks. The sputtered nanoscale Ti-Ta-Nb coatings exhibited significantly greater cell attachment compared to Ti-6Al-4V and Ti-Ta-Nb disks. Nanoscale Ti-Ta-Nb coatings exhibited significantly greater ALP specific activity and total protein production compared to the other 2 groups CONCLUSIONS. It was concluded that nanoscale Ti-Ta-Nb coatings enhance cell adhesion. In addition, Ti-Ta-Nb alloy and its nanoscale coatings enhanced osteoblast differentiation, but did not support osteoblast precursor proliferation compared to Ti-6Al-4V. These results indicate that the new developed Ti-Ta-Nb alloy and its nanoscale Ti-Ta-Nb coatings may be useful as an implant material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.732-734
• /
• 2003

A solvothermal synthetic method to $BaTiO_3$ nanoparticle has been investigated in toluene solution with $BaTi(OR)_6$ as precursor. A precursor prepared from barium metal with toluene, isopropanol and titanium isopropoxide was used as a starting material. Weight ratio of precursor to solvent prepared in the mixture are 5/100, 10/100, 20/100 and 50/100wt%. At the weight ratio of 50/100wt%, $BaTiO_3$ butterfly twin crystalline(${\fallingdotseq}100nm$) was obtained after synthesis at $250^{\circ}C$ for 20hrs in an autoclave. X-ray diffraction and transmission electron microscopy showed that the product of 50/100wt% has crystallization. At 5/100, 10/100, and 20/100wt%, however, red colloidal solution was obtained after synthesis and crystalline phase of $BaTiO_3$ was not produced.