• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.106-110
• /
• 2002

Gel-type polyacrylonitrile(PAN) polymer electrolytes have been prepared using ethylene carbonate(EC), propylene carbonate(PC) and dimethyl carbonate(DMC) plasticizer, $LiPF_6$ salt and $TiO_2$ ceramic filler. Electrochemical properties, such as electrochemical stability, ionic conductivity and compatibility with lithium metal and mechanical properly of polymer electrolytes were investigated. Charge/discharge performance of lithium secondary battery using these polymer electrolytes were investigated. The maximum load that the polymer electrolyte resists increased about two times as a result of adding $TiO_2$ in the polymer electrolyte containing EC and PC. Polymer electrolyte containing EC, PC and $TiO_2$ also showed ionic conductivity of $2\times10^{-3} S/cm$ at room temperature and electrochemical stability window up to 와 4.5V. Polymer electrolyte containing EC, PC, and $TiO_2$ showed the most stable interfacial resistance of $130\Omega$ during 20 days in the impedance spectra of the cells which were constructed by lithium metals as electrodes. Lithium metal secondary battery which employed $LiCoO_2$ cathode, lithium metal anode and $TiO_2$-dispersed polymer electrolyte showed $90\%$ of charge/discharge efficiency at the 1C rate of discharge.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.218-227
• /
• 2003

Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au ohmic contacts to n-type InCaAs were investigated for applications to AlGaAs/GaAs HBT emitter ohmic contacts. In the Pd/Si/Ti/Pt ohmic contact, as-deposited contact showed non-ohmic behavior, and high specific contact resistivity of $5\times10^{-3}\Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $375^{\circ}C$/10 sec. However, the specific contact resistivity decreased remarkably to $2\times10^{-6}\Omega\textrm{cm}^2$ by annealing at $425^{\circ}C$/10sec. In the Pd/Si/Pd/Ti/Au ohmic contact, minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved by annealing at $400^{\circ}C$/20sec. In both ohmic contacts, low contact resistivity and non-spiking planar interface between ohmic materials and InGaAs were maintained. Therefore, these thermally stable ohmic contact systems are promising candidates for compound semiconductor devices. RF performance of the AlGaAs/GaAs HBT was also examined by employing the Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au systems as emitter ohmic contacts. Cutoff frequencies were 63.9 ㎓ and 74.4 ㎓, respectively, and maximum oscillation frequencies were 50.1 ㎓ and 52.5 ㎓, respectively. It shows very successful high frequency operations.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.861-867
• /
• 2019

$Li_4Ti_5O_{12}$ is a promising next-generation anode material for lithium-ion batteries due to excellent cycle life, low irreversible capacity, and little volume expansion during charge-discharge process. However, it has poor charge capacity at high current density due to its low electrical conductivity. To improve this weakness, porous $Li_4Ti_5O_{12}$ was synthesized by sol-gel method with P123 as chelating agent. The physical characteristics of as-prepared sample was investigated by XRD, SEM, and BET analysis, and electrochemical properties were characterized by cycle performance test, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS). $Li_4Ti_5O_{12}$ synthesized by 0.01mol ratio of P123/Ti showed most unified particle size, high specific surface area, and relatively high porosity. EIS analysis showed that depressed semicircle size was remarkably reduced, which suggested resistance value in electrode was decreased. Capacity in rate performance showed 178 mAh/g at 0.2C, 170 mAh/g at 0.5C, 110 mA/h at 5C, and 90 mAh/g at 10C. Capacity retention also showed 99% after rate performance.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.85-90
• /
• 2017

The $TiCl_4$ as a blocking material is adsorbed in the mesoporous $TiO_2$ electron transfer layer(ETL) of the Perovskite solar cell to prevent the direct contact between the FTO electrode and the photoactive layer(AL), and facilitate the movement of the electrons between $TiO_2:TiCl_4$ ETL and Perovskite AL to improve the photoelectric conversion efficiency(PCE). The structure of the perovskite solar cell is FTO/$TiO_2:TiCl_4$/Perovskite($CH_3NH_3PbI_3$)/spiro-OMeTAD/Ag. It was investigated that the dipping time of the $TiO_2$ into $TiCl_4$ aqueous solution affects on the photoelectric characteristics of the device. By the dipping for 30 minutes, the PCE of the perovskite solar cell with the $TiO_2:TiCl_4$ ETL was the highest 10.46%, which is 27% higher than the cell with $TiO_2$ ETL. From SEM, EDS, and XRD characterization on the $TiO_2:TiCl_4$ ETL and the perovskite AL, it was measured that the decrease of the porosity of the $TiO_2$ layer, the detection of the Cl component by the $TiCl_4$ adsorption, the cube-type morphology of perovskite AL, and shift of the $PbI_2$ peak of the perovskite AL. From these results, it was confirmed that the $TiO_2:TiCl_4$ ETL and the perovskite AL were formed.

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.214-221
• /
• 2001

The use of an asymmetric Mach-Zehnder interferometric amplitude modulator to measure a relatively low frequency electric field strength is described. The sensitivity of an electric field sensor using a $Ti:LiMbO_3$ optical modulator is strongly affected by the shape of a electrode(probe antenna). To measure the low frequency electric field, a probe antenna of wide effective area is more useful than the usual dipole antenna. As a proof of this, the optical modulator was fabricated with a plate-type probe antenna and the usefulness of this antenna tested for measuring low frequency electric field strength. Measurements were performed in the range 0.1 V/cm to 60 V/cm at 60Hz through 100 kHz. Using a probe antenna of $10\;mm{\times}10\;mm$, the output voltage of $10^{-2}\;mV$ was measured with respect to the electric field strength of 0.1 V/cm at 60 Hz. By increasing the effective area of the probe antenna, better sensitivity is obtainable over the measured range.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.204-208
• /
• 2012

$TiO_2$ ($Ti_{1-x}Nb_xO_2$, x= 0.04~0.06) transparent conducting oxide film was fabricated by RF magnetron sputtering process and their electrical, optical, stability properties were studied. When the Nb 4 at% sputtering target was used with RF power 120 W, pressure 8 mTorr, post-annealing temperature $600^{\circ}C$, the resistivity of TNO film was $4{\times}10^{-4}\;{\Omega}-cm$. The optical transmittance in the visible wavelength was ca. 86%. TNO films require heat treatment during or after the deposition process. When the film was deposited at room temperature and post-annealed at $600^{\circ}C$, the lowest resistivity was obtained. When the TNO film was exposed to high temperature and humidity, the resistivity of the film was rather decreased. The stability to temperature and humidity implies that the TNO film could be a appropriate candidate for In-free, ZnO-free transparent conducting oxide materials.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.221-226
• /
• 1998

Amorphous (Ba, Sr)$TiO_3$[BST] layer(30, 70 nm) was introduced between crystalline BST and $RuO_2$electrode to realize double-layered BST structure in order to improve the properties of BST film. The structure and surface morphology of double-layered BST film were modified by the application of amorphous BST layer; that is, surface became smoother and grain size increased abruptly. Amorphous layer thicker than 30 nm was effective to hinder the influence of $RuO_2$surface on the structure of as-grown BST films by in-situ process. Dielectric constant of double-layered BST film was improved dramatically from 152 to 340 and leakage current was lowered from $1.25{\times}10^{-5}A/{\textrm}{cm}^2);to;6.85{\times}10^{-7}A/{\textrm}{cm}^2$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.179-179
• /
• 2008

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 산화물 반도체 세라믹이다. 이러한 성질을 이용하여 degaussing 소자, 정온 발열체, 온도센서, 전류 제한소자 등 상업적으로 여러 분야에서 연구되고 있다. 또한 원가절감 등을 위하여 Ni 내부전극을 사용하여 환원 분위기에서 소결하는 칩 타입에 대한 연구가 진행되고 있다. 본 연구에서는 Sm 함량(0.1at%~1.0at%)을 달리한 $BaTiO_3$(Si, Mn, Ca) 계를 선택하여 3%$H_2/N_2$ 분위기에서 1200~$1260^{\circ}C$, 2h 소결한 후 공기 중에서 재산화 처리하고 재산화 시간에 따른 PTC 특성 변화에 대하여 고찰하였다. 재산화 온도와 시간은 각각 $800^{\circ}C$와 0.5h~10h으로 하였다. Sm 함량을 달리하여 환원 분위기에서 소결한 시편의 미세구조와 PTC 특성과의 상관관계를 관찰한 결과, 소결온도가 낮을수록 PTC 특성은 좋아졌으며, 상온 비저항은 Sm 함량이 높아질수록 낮아졌다. 또한 Sm 함량이 높아질수록 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 낮아졌다. 재산화 시간에 따른 PTC 특성은 다소 떨어졌지만 소결온도에 따라 달리 나타났다. Jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Sm을 0.7 at% 첨가한 계에서 재산화를 1시간 처리한 시편에서 가장 우수하였다.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.44-47
• /
• 2001

Effects of $Er_2O_3$ addition on the dielectric properties of non-reducible $BaTi_3$-based X7R dielectrics with Ni electrode have been studied in reducing atmosphere. X7R with moderate temperature-dependence was developed after addition of $Er_2O_3$ with $MnO_2-MgO$; room-temperature dielectric constant and dissipation factor were >2900 and < 1.0%, respectively. The addition of $Er_2O_3$ greater than 3.0 mol% improved the temperature dependence of dielectric properties, but a significant decrease of the dielectric constant at room-temperature was observed. The TCC curves rebated clockwise with increasing MnO$_2$ content at a given additive system, 1.5 mol% $Er_2O_3$ and 2.0 mol% MgO.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.3
• /
• pp.110-116
• /
• 2020

Grains in the BaTiO₃, which is used for a dielectric layer in MLCC(Multi-Layer Ceramic Capacitor) are necessary to form core/shell structure for a stable TCC(Temperature Coefficient of Capacitance) behavior. The shell property has been deduced from the whole TCC behavior of core/shell structure due to its tiny size, ~ few ㎛. This study demonstrates the individual TCC behavior of the shell phase measured by micro-contact measurement in a temperature range between 35 and 135℃. Pt electrode pairs deposited on an enlarged core/shell structure in a diffusion couple sample made the measurement possible. As a result, the DPT (Diffusion Phase Transition) behavior of the shell phase was revealed as a different TCC behavior from that of the core: a broad peak with T_m at 65℃. This would be also useful experimental data for a modelling that depicts dielectric-temperature behavior of core/shell structure.