• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.501-504
• /
• 2008

A concrete carbonation model has been constructed that takes account of the diffusion of carbon dioxide through a coating and reaction with calcium hydroxide, and this model has been validated by an accelerated carbonation experiment. (1) By using values for the coatings calculated on the basis of a diffusion.permeation theory as input data for the analysis of diffusion.reaction carbonation in an unsteady state, the effect of the coatings in reducing carbonation can be represented with high accuracy. (2) Through a sensitivity analysis of the diffusion.reaction carbonation model and the experimental results, we found that the diffusion coefficient of calcium hydroxide shows a high interrelationship at 1e-12($m^2/s$). The reaction rate constant for carbonation shows a high interrelationship at 5e-5($m^3/mol/s$).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.133-146
• /
• 2013

While the use of internet is routine nowadays, users receive and share information through a variety of media. Through the use of internet, information delivery media is diversifying from traditional media of one-way communication, such as newspaper, TV, and radio, into media of two-way communication. In contrast of traditional media, blogs enable individuals to directly upload and share news, which can be considered to have a differential speed of information diffusion than news media that convey information unilaterally. Therefore this Study focused on the difference between online news and social media blogs. Moreover, there are variations in the speed of information diffusion because that information closely related to one person boosts communications between individuals. We believe that users' standard of evaluation would change based on the types of information. As well, the speed of information diffusion would change based on the level of proximity. Therefore, the purpose of this study is to examine the differences in information diffusion based on the types of media. And then information is segmentalized and an examination is done to see how information diffusion differentiates based on the types of information. This study used the Bass diffusion model, which has been frequently used because this model has higher explanatory power than other models by explaining diffusion of market through innovation effect and imitation effect. Also this model has been applied a lot in other information diffusion related studies. The Bass diffusion model includes an innovation effect and an imitation effect. Innovation effect measures the early-stage impact, while the imitation effect measures the impact of word of mouth at the later stage. According to Mahajan et al. (2000), Innovation effect is emphasized by usefulness and ease-of-use, as well Imitation effect is emphasized by subjective norm and word-of-mouth. Also, according to Lee et al. (2011), Innovation effect is emphasized by mass communication. According to Moore and Benbasat (1996), Innovation effect is emphasized by relative advantage. Because Imitation effect is adopted by within-group influences and Innovation effects is adopted by product's or service's innovation. Therefore, ours study compared online news and social media blogs to examine the differences between media. We also choose different types of information including entertainment related information "Psy Gentelman", Current affair news "Earthquake in Sichuan, China", and product related information "Galaxy S4" in order to examine the variations on information diffusion. We considered that users' information proximity alters based on the types of information. Hence, we chose the three types of information mentioned above, which have different level of proximity from users' standpoint, in order to examine the flow of information diffusion. The first conclusion of this study is that different media has similar effect on information diffusion, even the types of media of information provider are different. Information diffusion has only been distinguished by a disparity between proximity of information. Second, information diffusions differ based on types of information. From the standpoint of users, product and entertainment related information has high imitation effect because of word of mouth. On the other hand, imitation effect dominates innovation effect on Current affair news. From the results of this study, the flow changes of information diffusion is examined and be applied to practical use. This study has some limitations, and those limitations would be able to provide opportunities and suggestions for future research. Presenting the difference of Information diffusion according to media and proximity has difficulties for generalization of theory due to small sample size. Therefore, if further studies adopt to a request for an increase of sample size and media diversity, difference of the information diffusion according to media type and information proximity could be understood more detailed.

• The Journal of Information Systems
• /
• v.22 no.1
• /
• pp.225-248
• /
• 2013

Korean government has been implementing a smart grid testbed in Jeju Island for the low-carbon green growth. As smart grids are in the early stage of their diffusion, strategic guidelines and related measures are needed to spread them successfully. In general, the successful diffusion of new technologies or new products are mostly determined in its early stages. With the introduction of smart grids, the electricity market paradigm will be transformed into user-oriented from provider-oriented. Thus, a study on the diffusion of smart grids from the perspective of users is necessary. This paper examines factors affecting the adoption and diffusion of smart grids from users' perspectives and provide strategic guidelines for diffusing the smart grid. Researchers conducted in-depth interviews with 41 people who have been already using smart grids in the Jeju testbed. Semi-structured interviews were used to collect data. The interviews were recorded on a digital voice recorder memory and subsequently transcribed verbatim. A total of 133 pages of transcripts were obtained from about 10 hours interviews. 97 concepts, 47 sub-categories and 19 categories were identified through open coding of grounded theory. We suggested a paradigm model for diffusing smart grids and total of seven propositions as strategic guidelines.

• Computers and Concrete
• /
• v.3 no.6
• /
• pp.401-422
• /
• 2006

A multi-species model based on the Nernst-Planck equation has been developed by using a finite volume method. The model makes it possible to simulate transport due to an electrical field or by diffusion and to predict chloride penetration through water saturated concrete. The model is used in this paper to assess and analyse chloride diffusion coefficients and chloride binding isotherms. The experimental assessment of the effective chloride diffusion coefficient consists in measuring the chloride penetration depth by using a colorimetric method. The effective diffusion coefficient determined numerically allows to correctly reproduce the chloride penetration depth measured experimentally. Then, a new approach for the determination of chloride binding, based on non-steady state diffusion tests, is proposed. The binding isotherm is identified by a numerical inverse method from a single experimental total chloride concentration profile obtained at a given exposure time and from Freundlich's formula. In order to determine the initial pore solution composition (required as initial conditions for the model), the method of Taylor that describes the release of alkalis from cement and alkali sorption by the hydration products is used here. Finally, with these input data, prediction of total and water-soluble chloride concentration profiles has been performed. The method is validated by comparing the results of numerical simulations to experimental results obtained on various types of concretes and under different exposure conditions.

• Computers and Concrete
• /
• v.22 no.3
• /
• pp.319-326
• /
• 2018

RC (Reinforced Concrete) members are always subjected to loading conditions and have construction joints when constructed on a big scale. Service life for RC structure exposed to chloride attack is usually estimated through chloride diffusion test in sound concrete, however the test is performed without consideration of effect of loading and joint. In the present work, chloride diffusion coefficient is measured in concrete cured for 1 year. In order to evaluate the effect of applied load, cold joint, and mineral admixtures, OPC (Ordinary Portland Cement) and 40%-replaced GGBFS (Ground Granulated Blast Furnace Slag) concrete are prepared. The diffusion test is performed under loading conditions for concrete containing cold joint. Investigating the previous test results for 91 days-cured condition and the present work, changing diffusion coefficients with applied stress are normalized considering material type and cold joint. For evaluation of service life in RC continuous beam with 2 spans, non-linear analytical model is adopted, and service life in each location is evaluated considering the effects of applied stress, cold joint, and GGBFS. From the work, varying service life is simulated under various loading conditions, and the reduced results due to cold joint and tensile zone are quantitatively evaluated. The effect of various conditions on diffusion can provide more quantitative evaluation of chloride behavior and the related service life.

• Journal of the Korean Society of Combustion
• /
• v.15 no.3
• /
• pp.74-81
• /
• 2010

In this study, soot formation characteristics on the instability of laminar diffusion flames were investigated experimentally using a concentric co-flow burner. When a small amount of air was supplied through an inner nozzle, a stable propane laminar diffusion flame became unstable and began to oscillate mainly due to the dilution effect. The increase of air flow rate transformed an oscillating non-sooting flame into a stable nonsooting flame. When the air flow rate was continuously increased an inner flame was formed and the flame was changed to an oscillating sooting flame, an oscillating non-sooting flame and finally a stable non-sooting hollow flame. When the air flow rate was decreased, a non-sooting hollow flame was eventually changed back to a stable non-sooting flame. The presence of an inner flame, however, altered the soot formation characteristics of a flame. More soot production was observed with the presence of an inner flame. The increased or decreased soot formation/oxidation rates, the radiation heat loss, and the heating effect of inner flames are most likely to be responsible for the observed instability of laminar diffusion flames.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.377-382
• /
• 2010

For business purposes, it is important to identify diffusion power users, a group of users who have big influence on other users in diffusing content. In this paper, we use the independent cascade model for determining diffusion power users, and to do so, we need a method for calculating the assimilation probability between users. This paper proposes the concepts of user delivery power and a way to quantifying the value of this. User delivery power is used to compute the assimilation probability with user content power. We analyze the proposed method by comparing its performance with those of existing methods through experiments using a real blog network data.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.67-74
• /
• 2014

The purpose of this study is to estimate regional economic effects of spatial diffusion of wildfire using Cobb-Douglas production function of agriculture and forestry. The analysis is applied to Gangwon and Gyeongbuk provinces where are the most damaged of wildfire in Korea. The damaged areas are derived from multiplied by the occurrence probability of wildfire and diffusion areas of wildfire for micro-spatial unit level with ArcGIS techniques. The models of wildfire provides that the spatial diffusion of wildfire increases with the rising of highest temperature and average wind speed. Through the production function, value added of Agriculture and Forest sectors get damaged where the Cos-converted slope aspect of mountains are toward the South. The production model provides reductions of regional value added by increasing damaged areas of wildfire. It reveals that the most damaged region is Andong city in Gyeongbuk province, where value added loss is 1.25 billion Won, which is about 0.72% of total value added in agriculture and forestry of the city. As a view of policy makers, it needs to be considered to establish prevention policies against wildfires because regional economic losses from wildfire are depending on geographical conditions and performances of the major industry related to wildfire's diffusion such as agriculture or tourism sector according to the result of analysis.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.78-88
• /
• 1996

It is important to understand the process of IT diffusion between organizations for meeting effectively IT progress and its changes. The previous studies provide, the process of IT diffusion between organizational members, organizational factors facilitating the assimilation of IT within the organization, and the organizational members' usage of communication channels in the IT adoption process. But they failed to provide comprehensively the diffusion process of IT between organizations. Therefore, an empirical research through a field survey has been performed to examine the diffusion process of RDB with 64 companies to overcome the limits of the previous studies. The purpose of this study is (1) to empirically examine the interaction of companies(prior adopters and potential adopters), (2) to look into the differences of the factors of organizational structure and the periods of RDB adoption process between OAE(Organizations Adopting Earlier) and OAL(Organizations Adopting Later), and the importance of communication channels used in IT planning stage and adoption stage, (3) to inquire into the difference of RDB performance between OAE and OAL. The results of this study indicate that there is no interaction between the prior adopters and the potential adopters. Also, there are great significant differences with regards to variables of CEO's age, CEO's concern on IT, formalization, centralization compensation systems, CIO's attitudes on changes, RDB adoption periods, performance of RDB. In addition, interpersonal channels have been much more used than mass communication channels in both IT planning stage and adoption stage. This study provides good guidelines to the companies and the vendors in shaping the strategies of IT adoption and IT diffusion respectively.