• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.4
• /
• pp.41-49
• /
• 2009

In ubiquitous sensor networks, sensor nodes can be compromised by an adversary since they are deployed in hostile environments. False sensing reports can be injected into the network through these compromised nodes, which may cause not only false alarms but also the depletion of limited energy resource in the network. In the security solutions for the filtering of false reports, the choice of a security threshold value which determines the security level is important. In the existing adaptive solutions, a newly determined threshold value is broadcasted to the whole nodes, so that extra energy resource may be consumed unnecessarily. In this paper, we propose an application of the recursive contract net protocol to determine the threshold value which can provide both energy efficiency and sufficient security level. To manage the network more efficiently, the network is hierarchically grouped, and the contract net protocol is applied to each group. Through the protocol, the threshold value determined by the base station using a fuzzy logic is applied only where the security attack occurs on.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.943-947
• /
• 2009

To support an efficient management of software verification and validation activities, many defect prediction models have been proposed based on object oriented metrics. In order to apply defect prediction models, we need to determine a threshold value. Because we cannot know actually where defects are, it is difficult to determine threshold. Therefore, we performed a series of experiments to explore the issue of determining a threshold. In the experiments, we applied defect prediction models to other systems different from the system used in building the prediction model. Specifically, we have applied three models - Olague model, Zhou model, and Gyimothy model - to four different systems. As a result, we found that the prediction capabilities varied considerably with a chosen threshold value. Therefore, we need to perform a study on the determination of an appropriate threshold value to improve the applicably of defect prediction models.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.400-410
• /
• 2010

In an identity-based threshold broadcast encryption (IDTHBE) scheme, a broadcaster chooses a set of n recipients and a threshold value t, and the plaintext can be recovered only if at least t receivers cooperate. IDTHBE scheme is different from the standard threshold public key encryption schemes, where the set of receivers and the threshold value are decided from the beginning. This kind of scheme has wide applications in ad hoc networks. Previously proposed IDTHBE schemes have ciphertexts which contain at least n elements. In addition, the security of theses schemes relies on the random oracles. In this paper, we introduce two new constructions of IDTHBE for ad hoc networks. Our first scheme achieves S-size private keys while the modified scheme achieves constant size private keys. Both schemes achieve approximately (n-t)-size ciphertexts. Furthermore, we also show that they are provablesecurity under the decision bilinear Diffie-Hellman Exponent (BDHE) assumption in the standard model.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.161-173
• /
• 2020

This study examines the nonlinear relationship between financial development and economic growth in Pakistan using the threshold regression model for the period 1980-2017. We also employed quantile regression with 0.25, 0.50, and 0.75 quantiles of conditional distribution. The quantile regression is based on minimizing of sum of squared residuals. The result indicates that economic growth responds positively to financial development when the level of financial development surpasses the threshold value of 0.151. However, when financial development lies below the threshold value (that is, 0.151), its impact on economic growth is negative. Thus, when financial development of Pakistan surpasses the threshold level, it contributes more towards economic growth since greater level of financial development contributes more to boosts economic growth. This finding reveals that economic growth reacts differently to financial development, and the relationship between financial development and economic growth is U-shaped in Pakistan. Among the other variables, physical capital, labor force, and government expenditure exert a positive effect on economic growth. Furthermore, inflation rate and trade openness have an insignificant impact on economic growth. The results of quantile regression also confirm the non-linear relationship between financial development and economic growth in Pakistan. The finding of this study suggests revamping of financial sector policies in Pakistan.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3166-3168
• /
• 2000

This paper proposed variable threshold dual rate ADPCM coding method which is modified from the standard ADPCM of ITU G.726 for speech quality improvement. The speech quality of variable threshold dual rate ADPCM is better than single rate ADPCM at noisy environment without increasing the complexity by using ZCR(Zero Crossing Rate). In this case, ZCR is used to divide input signal samples into two categories(noisy & speech). The samples with higher ZCR is categorized as the noisy region and the samples with lower ZCR is categorized as the speech region. Noisy region uses higher threshold value to be compressed by 16Kbps for reduced bit rates and the speech region uses lower threshold value to be compressed by 40Kbps for improved speech quality. Comparing with the conventional ADPCM, which adapts the fixed coding rate. the proposed variable threshold dual rate ADPCM coding method improves noise character without increasing the bit rate. For real time applications, ZCR calculation was considered as a simple method to obtain the background noise information for preprocess of speech analysis such as FFT and the experiment showed that the simple calculation of ZCR can be used without complexity increase. Dual rate ADPCM can decrease the amount of transferred data efficiently without increasing complexity nor reducing speech quality. Therefore result of this paper can be applied for real-time speech application such as the internet phone or VoIP.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.471-478
• /
• 2004

Electromyogram (EMC) signal generated by voluntary contraction of muscles is often used in a rehabilitation devices such as an upper limb prosthesis because of its distinct output characteristics compared to other bio-signals. This paper proposes an EMG-based human-computer interface (HCI) for the control of the above-elbow prosthesis or the wheelchair. To control such rehabilitation devices, user generates four commands by combining voluntary contraction of two different muscles such as levator scapulae muscles and flexor-extensor carpi ulnaris muscles. The muscle contraction is detected by comparing the mean absolute value of the EMG signal with a preset threshold value. However. since the time difference in muscle firing can occur when the patient tries simultaneous co-contraction of two muscles, it is difficult to determine whether the patient's intention is co-contraction. Hence, the use of the comparison method using a single threshold value is not feasible for recognizing such co-contraction motion. Here, we propose a novel method using double threshold values composed of a primary threshold and an auxiliary threshold. Using the double threshold method, the co-contraction state is easily detected, and diverse interface commands can be used for the EMG-based HCI. The experimental results with real-time EMG processing showed that the double threshold method is feasible for the EMG-based HCI to control the myoelectric prosthetic hand and the powered wheelchair.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.10
• /
• pp.510-514
• /
• 2004

In this paper, we analytically examine the voltage transfer function dependent on input conditions for an N-Input NAND Gate. The logic threshold voltage, defined as a voltage at which the input and the output voltage become equal, changes as the input condition changes for a static NAND Gate. The logic threshold voltage has the highest value when all the N-inputs undergo transitions and it has the lowest value when only the last input connected to the last NMOS to ground, makes a transition. This logic threshold voltage difference increases as the number of inputs increases. Therefore, in order to provide a near symmetric voltage transfer function, a multistage N-Input Gate consisting of 2-Input Logic Gates is desirable over a conventional N-Input Gate.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.40-49
• /
• 1996

In this paper, we studied channel assignment and handover schemes for the indoor microcell systems. For efficient frequency spectrum reuse we proposed the high quality reassignment (HQR) scheme. Proposed HQR scheme tries to keep the reuse distances small by monitoring C/I of channels being used. To assign a channel for a new or handove call, the scheme checks C/I of all available channels. Then HQR assigns the channel that has C/I near the threshold value, A_TH. The scheme also checks C/I of ongoing calls and continuously reassigns a new channel when needed. It attempts handover not only when C/I gets below a handover threshold value, HO_TH, but also when C/I becomes above a high quality reassignment threshold, H_TH. The performance of the proposed HQR scheme was analyzed by a computer simulation configuraed. The performance of the scheme was also analyzed for various threshold values selected and the results are presented in this paper. The results show that HQR scheme perfomrs better than the scheme adopted for DECT.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.54-60
• /
• 2011

The purpose of this study is verification of threshold of the aircraft turbulence index and icing index using PIREPs and KWRF on Korean peninsula, to operational weather support. There is improvement in new threshold value made of the pilot weather report data and the turbulence and icing index from KWRF model result, using the ROC Diagram method. the accuracy is up to 0.6 compared with the precedent study result 0.5. Through this study, It is founded on the research and development of the Korean peninsula aircraft turbulence and icing.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.985-992
• /
• 2005

Vehicle Stability Control (VSC) system prevents vehicle from spinning or drifting out mainly by braking intervention. Although a control threshold of conventional VSC is designed by vehicle characteristics and centered on average drivers, it can be a redundancy to expert drivers in critical driving conditions. In this study, a manual adaptation of VSC is investigated by changing the control threshold. A control threshold can be determined by phase plane analysis of side slip angle and angular velocity which is established with various vehicle speeds and steering angles. Since vehicle side slip angle is impossible to be obtained by commercially available sensors, a side slip angle is designed and evaluated with test results. By using the estimated value, phase plane analysis is applied to determine control threshold. To evaluate an effect of control threshold, we applied a 23-DOF vehicle nonlinear model with a vehicle planar motion model based sliding controller. Controller gains are tuned as the control threshold changed. A VSC with various control thresholds makes VSC more flexible with respect to individual driver characteristics.