• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.11-14
• /
• 2009

Micro-pulling down(${\mu}-PD$)법을 이용하여 직경 2mm, 길이 $15{\sim}25\;mm$의 Zn와 Yb가 첨가된 near-stoichiometric 조성의 $LiNbO_3$ 단결정을 성장하였다. 일정 직경의 매끄럽고 결함이 없는 양질의 단결정임을 확인하였고, 결정 내 첨가된 Zn와 Yb의 조성이 고루 분포되었음을 알 수 있었다. Raman spectra를 통해 나타난 모든 peak은 $LiNbO_3$ power의 peak과 일치함을 알 수 있었고, 이를 통해 Hexagonal 구조의 $LiNbO_3$가 성장되었음을 확인할 수 있었다. Zn의 첨가량 증가에 따른 IR 영역의 투과도 비교를 통해 광손상을 억제에 효과가 있는 Zn 첨가의 역치량이 1 mol%임을 알 수 있었다.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.193-201
• /
• 2006

This study was performed to investigate employee exposures to waste anesthetic gases, such as enflurane and sevoflurane in operating rooms of general surgical, children's and dental clinics of a large hospital located in Seoul and to analyze factors affecting the concentrations of waste anesthetic gases. The results of the study are summarized below. 1. Based on results of personal and area samples for airborne enflurane, all of the employees investigated in this study were exposed to airborne enflurane concentrations below the ACGIH-threshold limit value (TLV) of 75 ppm. 2. However, based on results of personal samples for sevoflurane, employees of two (2) out of eleven (11) operating rooms were exposed to sevoflurane concentrations in excess of the NIOSH recommended exposure limit (REL) of 2 ppm. A similar trend was found in the area samples. 3. To investigate the source of sevoflurane emissions, airborne sevoflurane concentrations were measured on an anesthesia machine, a drug cabinet and a desk. It was indicated that the geometric means were 0.93 ppm, 0.83 ppm and 0.72 ppm, respectively. 4. Factors affecting waste anesthetic gas concentrations were the age of anesthesia machine, the volume of operating room and the extent of ventilation (p<0.05). 5. It is recommended that the use of anesthesia equipments be properly controlled, the operating room be well ventilated, and the airborne concentrations of anesthetic gases be continuously monitored.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.69-74
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves, as specified in the codes and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• 대한토목학회논문집
• /
• 제31권2B호
• /
• pp.129-146
• /
• 2011

본 연구에서는 지역특성에 따른 우리나라의 여름철(6월-8월) 극한강수의 정량적 변화와 호우빈도의 변화특성을 파악하기 위하여 1973년부터 2009년까지 전국 59개 기상관측소 자료를 이용하여 지속시간별 강수량의 월별 최고치와 한계치(threshold)를 초과한 강수일수를 대상으로 Mann-Kendall 검정을 수행하였다. 또한 기상관측소의 지역적 특성에 따른 변화를 분석하기 위하여 고도, 위도, 경도, 유역, 내륙 및 해안, 도시화 정도 등에 따라 분류하여 분석을 수행하였다. 분석결과, 지역특성에 따른 여름철 극한강수의 변화특성은 연강수량의 공간분포와 같이 지형의 영향을 많이 받는 것으로 나타났다. 여름철 강수일수는 연강수일수의 감소추세와는 반대로 증가하는 것으로 나타나 여름철 강수집중현상이 심화되고 있는 것으로 나타났다. 해안지역보다는 내륙지역이, 도시화 지역일수록 강수량의 증가와 강수일수의 증가현상이 뚜렷하게 나타났으며, 유역별로는 한강 유역이 강수의 양과 빈도의 증가가 더욱 뚜렷한 것으로 나타났다.

• 한국수산과학회지
• /
• 제46권5호
• /
• pp.626-637
• /
• 2013

We measured the grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS) and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) of intertidal surface sediment collected from 11 islands (62 stations) in the southern region of Jeollanam Province. The objective of this research was to evaluate the organic matter and trace metals contaminations of sediments from coastal island tidal flats. Surface sediment texture was characterized as follows: mud, sandy silt, muddy sand, and slightly gravelly sand facies. The finer sediments are mainly dominated in the northern part of each island. The concentrations of IL, COD, AVS and some trace metals (Al, Fe, Zn, Cr, Cu, and Hg) were higher in the northwestern part of Wan Island and the area between Gogeum and Sinji Islands, and were associated with relatively finer sediment, as compared to other locations. The concentrations of Mn, Pb, Cd, and As were higher in the northwestern and southeastern parts of Geoguem and Pyungil Islands, but were not correlated with mean grain size. Based on sediment quality guidelines (SQGs), the concentrations of trace metals were lower than the values of effect range low (ERL), used in United States, and threshold effects level (TEL), used in Korea, with exception of As. Similarly, the intertidal sediments were moderately contaminated with As, based on the the enrichment factor (EF) and the geoaccumulation index ($I_{geo}$). The high concentration of As in intertidal sediments from this study region may be due to the input of naturally or artificially contaminated submarine groundwater, contaminated waste from seaweed aquaculture operations and/or land-based seaweed processing facilities. Further studies are needed to identify the sources of As in this study region, and to determine the effects of As contamination on coastal ecosystem.

• 대한전자공학회논문지SD
• /
• 제43권4호
• /
• pp.23-30
• /
• 2006

본 연구에서는 나노 스케일 MuGFET(Mutiple-Gate FETs)의 단채널 효과와 corner effect를 3차원 시뮬레이션을 통하여 분석하였다. 문턱전압 모델을 이용하여 게이트 숫자(Double-gate=2, Tri-gate=3, Pi-gate=3.14, Omega-gate=3.4, GAA=4)를 구하였으며 추출된 게이트 숫자를 이용하여 각각의 소자 구조에 맞는 natural length($\lambda$)값을 얻을 수 있었다. Natural length를 통하여 MuGFET의 단채널 효과를 피할 수 있는 최적의 소자 구조(실리콘 두께, 게이트 산화막의 두께 등)를 제시 하였다. 이러한 corner effect를 억제하기 위해서는 채널 불순물의 농도를 낮게 하고, 게이트 산화막의 두께를 얇게 하며, 코너 부분을 약 17%이상 라운딩을 해야 한다는 것을 알 수 있었다.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.

• 한국광학회지
• /
• 제10권6호
• /
• pp.518-523
• /
• 1999

본 연구에서는 meltback 방법으로 mesa 모양을 형성하기 위하여 여러 가지 농도의 용액으로 meltback을 하였으며 InP 기판위에 InGaAsP 활성층과 InP cap층을 가지는 웨이퍼에 mesa 모양을 형성하기 위해서는 성장온도에서 성장용액의 80%인 InGaAsP(1.55$\mu$m)용액이 가장 적합한 것으로 확인되었다. meltback 방법만으로 PBH-LD(planar buried heterosturcture laser diode)를 제작하기 위한 완전한 mesa를 형성하기는 어려우며, 따라서 본 연구에서는 화학에칭에 이어 Meltback 방법을 이용하여 mesa 모양을 형성하고 연속하여 전류 차단층을 형성시킨 PBH-LD(planar buried heterosturcture laser diode)를 제작하였다. 이렇게 제작된 MQW-PBH-LD의 전기 광학적 특성은 공진기 길이가 $300{\mu}m$일 때 임계전류는 10mA, 내부양자효율은 82%, 내부손실은 $9.2cm^{-1}$, 특성온도는 $25~45^{\circ}C$ 사이에서는 65K, $45~65^{\circ}C$사이에서는 42K이었다.

• 한국환경과학회지
• /
• 제25권9호
• /
• pp.1329-1339
• /
• 2016

The purpose of this study was to obtain the basic data needed to identify the impact of the odor, emitted from the Ochang Scientific Industrial Complex area on the surrounding residential areas by measuring and confirming odor compounds. The analysis showed that complex odors were diluted from around 4 to 1. The offensive odor measurement results showed that among the sites, site 1 was highest in sulfur compounds, site 2 was highest in toluene, site 3 was highest in trimethylamine, and site 4 was highest in buthylaldehyde. It cannot be decided to be odor-causing compounds for higher odor concentration because each odor substance has a different odor threshold value. According to the odor contribution analysis for each site, site 1, site 2, and site 4 contained high buthylaldehyde concentrations, and site 3 had a high level of trimethylamine. It could be determined that highly evaluated substances were main causes to result in substance for each site.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권7호
• /
• pp.3211-3217
• /
• 2014

Background: The current study investigated the effects of Piper longumine on radio-sensitization of human breast cancer MDA-MB-231 cells and underlying mechanisms. Materials and Methods: Human breast cancer MDA-MB-231 cells were cultured in vitro and those in logarithmic growth phase were selected for experiments divided into four groups: control, X-ray exposed, Piper longumine, and Piper longumine combined with X-rays. Conogenic assays were performed to determine the radio-sensitizing effects. Cell survival curves were fitted by single-hit multi-target model and then the survival fraction (SF), average lethal dose ($D_0$), quasi-threshold dose ($D_q$) and sensitive enhancement ratio (SER) were calculated. Cell apoptosis was analyzed by flow cytometry (FCM). Western blot assays were employed for expression of apoptosis-related proteins (Bc1-2 and Bax) after treatment with Piper longumine and/or X-ray radiation. The intracellular reactive oxygen species (ROS) level was detected by FCM with a DCFH-DA probe. Results: The cloning formation capacity was decreased in the group of piperlongumine plus radiation, which displayed the values of SF2, D0, Dq significantly lower than those of radiation alone group and the sensitive enhancement ratio (SER) of D0 was1.22 and 1.29, respectively. The cell apoptosis rate was increased by the combination treatment of Piper longumine and radiation. Piper longumine increased the radiation-induced intracellular levels of ROS. Compared with the control group and individual group, the combination group demonstrated significantly decreased expression of Bcl-2 with increased Bax. Conclusions: Piper longumine at a non-cytotoxic concentration can enhance the radio-sensitivity of MDA-MB-231cells, which may be related to its regulation of apoptosis-related protein expression and the increase of intracellular ROS level, thus increasing radiation-induced apoptosis.