• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.77-84
• /
• 2006

We should measure receiver tracking threshold and command threshold of the satellite in Integrate System Test (IST) in order to check the normal received power range of LEO(Low Earth Orbit) satellite S-band receiver. In this paper, the algorithm of threshold measurement is examined and the result measured in Integrated System Test is displayed. And than, the factor could have an effect on the result of threshold measurement except the capability of receiver itself was analyzed and compensated as many as distorted value according to that analysis.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.985-992
• /
• 2005

Vehicle Stability Control (VSC) system prevents vehicle from spinning or drifting out mainly by braking intervention. Although a control threshold of conventional VSC is designed by vehicle characteristics and centered on average drivers, it can be a redundancy to expert drivers in critical driving conditions. In this study, a manual adaptation of VSC is investigated by changing the control threshold. A control threshold can be determined by phase plane analysis of side slip angle and angular velocity which is established with various vehicle speeds and steering angles. Since vehicle side slip angle is impossible to be obtained by commercially available sensors, a side slip angle is designed and evaluated with test results. By using the estimated value, phase plane analysis is applied to determine control threshold. To evaluate an effect of control threshold, we applied a 23-DOF vehicle nonlinear model with a vehicle planar motion model based sliding controller. Controller gains are tuned as the control threshold changed. A VSC with various control thresholds makes VSC more flexible with respect to individual driver characteristics.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2000

In fatigue crack growth test, it is important not only to analyze characteristics of fatigue crack growth but also to determine the threshold stress intensity factor, ${\Delta}K_{th}$. which is the threshold value of fatigue crack growth. Linear regression analysis using fatigue test data near the threshold is suggested to determine the ${\Delta}K_{th}$ in the standard test method but the ${\Delta}K_{th}$ can be affected by a fitting method. And there are some limitations on the linear regression analysis in the case of small number of test data near the threshold. The objective of this study is to investigate differences of the ${\Delta}K_{th}$ due to regression analysis method and to evaluate the relative error range of the ${\Delta}K_{th}$ in same fatigue crack growth test data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.897-913
• /
• 2016

Threshold signature is very important in identity authentication and some other applications. In December 2010, Chinese Encryption Administration released the SM2 elliptic curve digital signature algorithm as the first standard of the digital signature algorithm in China. At present, the papers on the threshold signature scheme based on this algorithm are few. A SM2 elliptic curve threshold signature scheme without a trusted center is proposed according to the Joint-Shamir-RSS algorithm, the Joint-Shamir-ZSS algorithm, the sum or diff-SS algorithm, the Mul-SS algorithm, the Inv-SS algorithm and the PM-SS algorithm. The proposed scheme is analyzed from correctness, security and efficiency. The correctness analysis shows that the proposed scheme can realize the effective threshold signature. The security analysis shows that the proposed scheme can resist some kinds of common attacks. The efficiency analysis shows that if the same secret sharing algorithms are used to design the threshold signature schemes, the SM2 elliptic curve threshold signature scheme will be more efficient than the threshold signature scheme based on ECDSA.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.799-810
• /
• 2003

Hydrologic models generally require land surface analysis to different topographic parameters defined as direct or indirect input variables to the model. Specially GIS supply the these parameters from digital data set of land surface The sensitivity analysis to DEM(Digital Elevation Model) resolution and the threshold area are of GIS extracted digital data set applied GIUH(Geomorphological Instantaneous Unit Hydrograph)model is investigated. Also it is compared the responses of GIUH model as input data of stream networks from digital data set(blue line) of NGIS and those extracted from DEM of various grid sizes. The results shows that the GIUH model is significantly affected by the DEM resolution and threshold area. According to the results, DEM grid size is suitable from 25m to 50m. Also threshold area is in the range of 30%∼50% for exceedance probability.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.274-279
• /
• 1998

We investigate a Leaky Bucket(LB) scheme with a threshold in the data buffer, where leaky rate changes depending on the contents of data buffer. We use the fluid flow model for the analysis of the LB scheme with a threshold. We model the bursty input source as markov modulated fluid flow(MMFF) As performance measures we obtain loss probability and mean delay. We present some numerical results to show the effects of the level of a threshold, the rate of token generation, the size of token pool, and the size the data buffer on the performances of the LB scheme with a threshold.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.3
• /
• pp.109-114
• /
• 2005

On the research for constructing secure group-oriented proxy signature schemes, there are several proposals of threshold proxy signature schemes which combine the notions of proxy signature with threshold signature. Recently, Hsu and Wu proposed a threshold proxy signature scheme which uses a self-certified public key based on discrete logarithm problem. In this paper, we show that this scheme is vulnerable to original signer's forgery attack. So our attack provides the evidence that this scheme does not satisfy nonrepudiation property.

• Communications for Statistical Applications and Methods
• /
• v.19 no.5
• /
• pp.705-720
• /
• 2012

In this paper, we introduce a hierarchical Bayesian model to simultaneously estimate the thresholds of each 6 cities. It was noted in the literature there was a dramatic increases in the number of deaths if the mean temperature passes a certain value (that we call a threshold). We estimate the difference of mortality before and after the threshold. For the hierarchical Bayesian analysis, some proper prior distribution of parameters and hyper-parameters are assumed. By combining the Gibbs and Metropolis-Hastings algorithm, we constructed a Markov chain Monte Carlo algorithm and the posterior inference was based on the posterior sample. The analysis shows that the estimates of the threshold are located at $25^{\circ}C{\sim}29^{\circ}C$ and the mortality around the threshold changes from -1% to 2~13%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.255-264
• /
• 2002

The topography is recognized as an important factor in determining the streamflow response of watershed to precipitation. In watershed analysis, stream networks are very important parameters. Each DEM grid size and flowaccumulation threshold value of drainage accumulation matrix have influence on stream networks extracted by using grid DEM. Therefore, stream networks extracted from DEM varies with each DEM grid size and flowaccumulation threshold value. Generally, small threshold values will generate more detailed stream network with higher drainage density High threshold values will generate coarser stream networks. In this paper, total stream length in the study area was used to calculate the flowaccumulation threshold value by each DEM grid size. Stream network was derived by each DEM grid size, which is applied flowaccumulation threshold value. Regression equation was derived by correlation between flowaccumulation threshold value and each DEM grid size.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1771-1776
• /
• 2020

Adverse effects in the measured gamma spectrum caused by radioactive statistical fluctuations, gamma ray scattering, and electronic noise can be reduced by energy spectrum denoising. Wavelet threshold denoising can be used to perform multi-scale and multi-resolution analysis on noisy signals with small root mean square errors and high signal-to-noise ratios. However, in traditional wavelet threshold denoising methods, there are signal oscillations in hard threshold denoising and constant deviations in soft threshold denoising. An improved wavelet threshold calculation method and threshold processing function are proposed in this paper. The improved threshold calculation method takes into account the influence of the number of wavelet decomposition layers and reduces the deviation caused by the inaccuracy of the threshold. The improved threshold processing function can be continuously guided, which solves the discontinuity of the traditional hard threshold function, avoids the constant deviation caused by the traditional soft threshold method. The examples show that the proposed method can accurately denoise and preserves the characteristic signals well in the gamma energy spectrum.