• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.3-15
• /
• 2000

In this paper we present a new image denoising filter that can suppress additive noise components while preserving signal components in the wavelet domain. The proposed filter, which we call an adaptive wavelet shrinkage(AWS) filter, is composed of two operators: the wavelet killing operator and the adaptive shrinkage operator. Each operator is selected based on the threshold value which is estimated adaptively by using the local statistics of the wavelet coefficients. In the wavelet killing operation, the small wavelet coefficients below the threshold value are replaced by zero to suppress noise components in the wavelet domain. The adaptive shrinkage operator attenuates noise components from the wavelet components above the threshold value adaptively. The experimental results show that the proposed filter is more effective than the other methods in preserving signal components while suppressing noise.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.495-498
• /
• 1999

In this paper, we propose the adaptive Odd/Even Multi-shell Median Filter(adaptive O/E MMF) to improve the defect that Modified Multi-shell Median Filter(MMMF) can not recover missing lines of vertical and cross direction. This filter uses odd/even multi-shells and new proposed threshold strategy The performance of the proposed filter is evaluated over image 'airfield 'by using MATLAB. As the proposed threshold strategy eliminate the number of redundant replacement, it suppresses impulse noise and recovers missing lines.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.1-8
• /
• 2000

In this paper, we formulate an optimal control problem to obtain the optimal signal strength and detection threshold for tracking with NN filter, First, we predict the tracking performance of NN filter by using the HYCA method. Based on this method, the predicted tracking performance is represented with respect to signal strength and detection threshold. Using this relation, we find the optimal parameters for following three examples： 1) the sequence of optimal detection threshold which minimizes sum of position estimation error； 2) the sequence of optimal detection threshold which minimizes sum of validation gate volume； and 3) the sequence of optimal signal strength and detection threshold which minimizes sum of signal strength.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.45.1-45.1
• /
• 2005

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.710-726
• /
• 2018

This paper presents an extended particle filter to increase the accuracy and decrease the computation load of vehicle tracking. Particle filter has been the subject of extensive interest in video-based tracking which is capable of solving nonlinear and non-Gaussian problems. However, there still exist problems such as preventing unnecessary particle consumption, reducing the computational burden, and increasing the accuracy. We aim to increase the accuracy without an increase in computation load. In proposed method, we calculate the direction angle of the target vehicle. The angular difference between the direction of the target vehicle and each particle of the particle filter is observed. Particles are filtered and weighted, based on their angular difference. Particles with angular difference greater than a threshold is eliminated and the remaining are stored with greater weights in order to increase their probability for state estimation. Threshold value is very critical for performance. Thus, instead of having a constant threshold value, proposed algorithm updates it online. The first advantage of our algorithm is that it prevents the system from failures caused by insufficient amount of particles. Second advantage is to reduce the risk of using unnecessary number of particles in tracking which causes computation load. Proposed algorithm is compared against camshift, direction-based particle filter and condensation algorithms. Results show that the proposed algorithm outperforms the other methods in terms of accuracy, tracking duration and particle consumption.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.103-109
• /
• 1995

In this paper, we propose a postprocessing method that neatly removes blocking effect but retains visually important image details and edges. The iterative thresholded lowpass filter is basically a low pass filter whose ouput depends on three variable elements. I.e. iteration number, threshold value and passband width. The threshold value restricts the difference between the output of the proposed filter and the original input independent of the iteration number. With this property, the iterative thresholded lowpass filter can retain most of the image details while smoothing the block boundaries. The other two variable elements, i.e. iteration number and passband width, can determine the convergence speed of the proposed filter. In this paper, we also propose several adaptive filtering techniques based on the iterative thresholded lowpass filter with their simulation results.

• Journal of Biomedical Engineering Research
• /
• v.18 no.2
• /
• pp.113-120
• /
• 1997

This paper presents an optimal design for the SPECT reconstruction filter, based on a physical limit of SPECT lesion detection capability. To increase the performance of the filter on lesion detectability, the filter design was focused on increasing the local SyW ratio of a threshold lesion, that was determined by minimum detectable lesion size (MDU) from SPECT lesion detectabllity contrast-detail curve. The proposed filter showed flexible window characteristics of resolution recovery and noise smoothing for MDLSs in the resolution-limited and photon-limited regions, respectively, compennting for the relative impact of the main limitation factors on threshold detectability. The simulated results showed good adaptability of the proposed filter to the changes in physical parameters of photon counts, object contrast, and detector system resolution.

• Journal of Information Processing Systems
• /
• v.14 no.2
• /
• pp.539-551
• /
• 2018

Images are unavoidably contaminated with different types of noise during the processes of image acquisition and transmission. The main forms of noise are impulse noise (is also called salt and pepper noise) and Gaussian noise. In this paper, an effective method of removing mixed noise from images is proposed. In general, different types of denoising methods are designed for different types of noise; for example, the median filter displays good performance in removing impulse noise, and the wavelet denoising algorithm displays good performance in removing Gaussian noise. However, images are affected by more than one type of noise in many cases. To reduce both impulse noise and Gaussian noise, this paper proposes a denoising method that combines adaptive median filtering (AMF) based on impulse noise detection with the wavelet threshold denoising method based on a Gaussian mixture model (GMM). The simulation results show that the proposed method achieves much better denoising performance than the median filter or the wavelet denoising method for images contaminated with mixed noise.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.05
• /
• pp.43-46
• /
• 1991

In this study, peripheral auditory system has been modeled as a filter bank of overlaping bandpass filters, and auditory filter shape has been estimated by notch noise masking. The filter was centered at 1kHz, and noise level was set to 40dB SPL. Masker noise was generated by summing sinusoidal functions with random phase for very steep skirts. To estimate threshold we used two alternative forced choice with 500 msec of duration. We measured threshold with notch width at 0.05,0.1,0.2,0.3,0.4 and 0.5. The filter was asymmetric with steeper upper branch and its ERB was 168 - 192 Hz.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.45-55
• /
• 1999

In this paper, we used the WLMS(Wavelet domain Least Mean Square) adaptive filter based on the wavelet transform to cancel grain noise. Usually, grain noise occurs in changes of the crystalline structure of metals in high temperature environment. It makes the detection of flaw difficult. The WLMS adaptive filtering algorithm establishes the faster convergence rate by orthogonalizaing the input vector of adaptive filter as compared with that of LMS adaptive filtering algorithm in time domain. We implemented the WLMS adaptive filter by using the delayed version of the primary input vector as the reference input vector and then implemented the CA-CFAR(Cell Averaging- Constant False Alarm Rate) threshold estimator. CA-CFAR threshold estimator enables to detect the flaw and back echo signals automatically. Here, we used the output signals of adaptive filter as its input signal. To Cow the statistical characteristic of ultrasonic signals corrupted by grain noise, we performed run test. The results showed that ultrasonic signals are nonstationary signal, that is, signals whose statistical properties vary with time. The performance of each filter is appreciated by the signal-to-noise ratio. After LMS adaptive filtering in time domain, SNR improves to about 2-3㏈ but after WLMS adaptive filtering in wavelet domain, SNR improves to about 4-6㏈.