• 한국ITS학회 논문지
• /
• 제17권5호
• /
• pp.39-47
• /
• 2018

Dial 알고리즘의 단일 링크 기반의 연산은 도시교통망에서 나타나는 순환통행에 대한 고려가 근본적으로 불가능하다. 또한, 효율적 경로의 정의는 엄격한 기준으로 분석 네트워크를 축소함으로써 비합리적 결과를 도출할 수도 있다. Dial 알고리즘의 두 가지 문제를 해결하기 위해서 이 연구는 두 개의 링크를 동시에 고려하는 효율적 방향 개념을 도입하고 덩굴망기반의 Dial 알고리즘을 제안한다. 또한 두 가지 예제 네트워크에 대한 사례분석을 통해서 덩굴망기반 Dial 알고리즘이 순환통행, 순환 및 비순환 혼재 통행을 구현할 수 있으며 비합리적 경로배정 문제를 완화하는 것을 보인다.

• 한국가스학회지
• /
• 제22권4호
• /
• pp.13-26
• /
• 2018

현재 KS Code 등 국내규정에서는 폭발위험장소의 범위를 계산하는 방법이 명확하게 나타나지 않아, 정확한 범위 선정을 위해서는 확산 모델링 해석을 이용하여야 한다. 본 연구애서는 대표적인 물질과 운전조건을 활용하여 확산 모델링에 비하여 간편하면서도 비교적 합리적인 폭발위험장소의 범위를 산정하는 방법을 제시하고자 하였다. 현재 시행되고 있는 국내외 표준을 바탕으로 폭발하한계(LFL, Lower Flammable Limit)까지 거리에 영향을 미치는 변수를 선정하였다. 총 16종의 인화성물질을 대상으로 물질변수, 운전변수, 기상조건에 대하여 모델링을 진행하였으며, 통계분석을 통해 영향을 미치는 변수를 선별하였다. 선별된 변수를 이용하여 폭발위험장소의 범위 선정을 위한 3단계 분류화 방법(3Step Classification Method)을 작성하였다.

• 농촌계획
• /
• 제28권1호
• /
• pp.37-47
• /
• 2022

The purpose of this study is to introduce the concept of community resilience to rural society and build an index suitable for the reality of rural areas. Furthermore, by calculating the importance of evaluation factors, it was attempted to present priorities and alternatives for each evaluation factor. By stratifying the derived indicators, a survey was conducted targeting 20 researchers, practitioners, and public officials, three groups of experts working in rural areas who were well aware of the realities and problems of rural areas. In the survey, a pairwise comparison was performed to compare factors 1:1 to calculate the importance, and for rational and consistent decision-making, decisions were made in the 9-grade section. Using the collected data, consistency analysis that can evaluate reliability in the decision-making process and the relative weight of evaluation factors were calculated through AHP analysis. As a result of the analysis, as a result of examining the priority of final importance by summarizing the importance of all evaluation factors, 'Income creation using resources' > 'Population Characteristics' > 'Tolerance' > 'External Support' > 'Social Accessibility' > 'Physical Accessibility' > 'Community Competence' > 'Infrastructure' > 'Leader Competence' > 'Natural Environment' was derived in the order. In the study dealing with urban community resilience indicators, social aspects such as citizen participation, public-private cooperation, and governance were presented as the most important requirements, but this study differs in that the 'income creation' factor is derived as the most important factor. This can be seen through the change in the income difference between rural and urban areas. The income structure of rural areas has changed rapidly, and it is now reaching a very poor level, so it is necessary to prepare alternatives to 'income creation' in the case of rural areas. Unlike urban indicators, 'population characteristics' and 'tolerance' were also derived as important indicators of rural society. However, there are currently no alternatives to supplement the vulnerability by strengthening the resilience of rural communities. Based on the priority indicators derived from the study, we tried to suggest alternatives necessary for rural continuity in the future so that they can be supplemented step by step.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.272-286
• /
• 2006

Dendritic hyperbranched poly(methyl methacrylate)s (PMMA)s, whose branched architectures resemble the 'dendron' part(s) of dendrimer, were synthesized by an iterative methodology consisting of two reactions in each iteration process: (a) a coupling reaction of u-functionalized, living, anionic PMMA having two tert-butyldimethylsilyloxymethylphenyl(SMP) groups with benzyl bromide(BnBr)-chain-end-functionalized PMMA, and (b) a transformation reaction of the introduced SMP groups into BnBr functionalities. These two reactions, (a) and (b), were repeated three times to afford a series of dendron-like, hyperbranched (PMMA)s up to third generation. Three dendron-like, hyperbranched (PMMA)s different in branched architecture were also synthesized by the same iterative methodology using a low molecular weight, functionalized 1,1-diphenylalkyl anion prepared from sec-BuLi and 1,1-bis(3-tert-butyldime-thylsilyloxymethylphenyl)ethylene in the reaction step (b) in each iterative process. Furthermore, structurally similar, dendron-like, hyperbranched block copolymers could be successfully synthesized by the iterative methodology using $\alpha$-functionalized, living, anionic poly(2-(perfluorobutyl) ethyl methacrylate) (PRfMA) in addition to $\alpha$-functionalized, living PMMA. Accordingly, the resulting block copolymers were comprised of both PMMA and PRfMA segments with different sequential orders. After the block copolymers were cast into films and annealed, their surface structures were characterized by angle-dependent XPS and contact angle measurements. All three samples showed significant segregation and enrichment of PRfMA segments at the surfaces.

• 상하수도학회지
• /
• 제19권1호
• /
• pp.25-30
• /
• 2005

In order to decrease the high costs of membrane process, we have tried to develop two alternatives to membrane; a cartridge type filter and a metal membrane were tested for the high permeation flux with low cost and low energy. This research mainly focused on three points; 1) operation with high permeation flux by using of a cartridge type filter and a metal membrane, 2) removals of the filterable organic materials (FOC) by pretreatments for the membrane fouling control, and 3) advanced wastewater treatment by SMBR process with intermittent aeration and high MLSS. An Intermittently aerated membrane bioreactor using a submerged micro filter (cartridge type) was applied in laboratory scale for the advanced wastewater treatment. To minimize membrane fouling, intermittent aeration was applied inside of the filter with $3.0kg_f/cm^2$. The experiments was conducted for 6 months with three different HRTs (8, 10, 12 hr) and high MLSS of 6,000 and 10,000mg/L. The filtration process could be operated up to 50 days with permeation flux of 500LMH. Regardless of the operating conditions, more than 95% of COD, BOD and SS were removed. Fast and complete nitrification was accomplished, and denitrification was appeared to be the rate-limiting step. More than 75% T-N could be removed due to the endogenous denitrification. T-P removal efficiency was increased to 80% under the condition of MLSS 10,000mg/L.

• 상하수도학회지
• /
• 제32권1호
• /
• pp.55-65
• /
• 2018

It is necessary to develop a mobile water production system in order to provide stable water supply in case of disasters such as floods or earthquakes. In this study, we developed a modular mobile water production system capable of producing water for various uses such as domestic water and drinking water while improving applicability in various raw water sources. The water production system consists of three stages of filtration (sand filtration - activated carbon filtration - pressure filtration) to produce domestic water and an additional reverse osmosis process to produce drinking water. In laboratory and field experiments, the domestic water production system showed excellent treatment efficiency for particulate matter, but showed limitations in the treatment of dissolved substances such as dissolved organic matter. In addition, ultraviolet irradiation was considered as additional disinfection step, because it does not form precipitates of manganese oxides after disinfection. Reverse osmosis process was added to increase the removal efficiency of dissolved substances and the treated water satisfied drinking water quality standards. Fluorescence analysis of dissolved organic matter showed that the fulvic acid-like substances in raw water was successfully removed in the reverse osmosis process. The mobile water production system developed in this study is expected to be used not only in water supply in case of disaster, but also widely used in islands and rural area.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.192-198
• /
• 2000

Three dimensional thermal cycle analysis of the plunger is carried out in repeated forming process of the TV glass, which is continued work of two dimensional analysis where an efficient method has been proposed. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 90 cycles to get reasonable solution. An exponential function fitting method is proposed, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Number of cases are analyzed using the proposed method and compared to the result of straightforward repetition, from which one finds that the method always reaches nearly convergent solution within $9{\sim}12$ cycles, but turns around afterwards without further convergence. Two step use is found most efficient, in which the exponential fitting is carried out fer the first 12 cycles, followed by simple repetition, which shows fast convergence expending only 6 additional cycles to get the accuracy within 2 error. This reduces the computation cycle remarkably from 90 to 18, which is 80% reduction. From the parametric studies, one reveals that the overall thermal behavior of the plunger in terms of cooling parameters and time is similar to that of 2 dimensional analysis.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.25-30
• /
• 1997

치환형 Ba-ferrite의 수소환원 거동은 순수한 Ba-ferrite와는 다르게 나타났다. 환원온도 250 .deg. C에서 520 .deg. C의 범위에서 치환형 Ba-ferrite의 보자력은 증가하다가 다시 감소하는 반면에 순수한 Ba-ferrite는 계속 감소 하였다. 치환형 Ba-ferrite의 환원과정은 환원되는 정도에 따라 3단계로 나뉘어진다. 1과 2단계에서 Ba-ferrite의 구조는 그대로 유지를 하지만 자기적 성질은 다르게 나타났다. 1단계에서 보자력은 증가하고 산화처리시 가역적이지만, 2단계에서는 보자력이 더욱 증가하고 산화처리시 비가역적이었다. 그러나 3단계에서는 Ba-ferrite 구조 자체가 붕괴되어 .alpha. -Fe와 소량의 BaFe $O_{3-x}$의 생성으로 $H_{c}$는 크게 감소하고 포화자화값은 130 emu/g으로 크게 증가하였다. 이 때 보자력 분포도는 크게 넓어지며 입자크기도 감소하였다. 또한 치환이온들은 환원과정에서 Ba-ferrite 구조의 붕괴를 억제하였으며, 2a + 4 $f_{IV}$ , 2b 및 12k 자리의 치환이온들이 4 $f_{VI}$ 와 12k'의 자리로 이동함을 확인하였다. 따라서 1과 2단계에서의 보자력 증가원인은 치환이온의 자리이동에 따른 고보자력 상의 생성 때문이었다.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3733-3739
• /
• 2010

본 논문의 연구목적은 의료기관에서의 경영성과측정에 사용하는데 사용되는 성과 요인들의 우선순위를 연구하고자 하는데 있다. 이를 위하여 계층분석기법을 사용하였다. 또한 의료기관의 경영성과를 측정하는 성과측정요인과 그에 따른 핵심성과 요인(Key Performance Indicator : KPI)은 Kaplan과 Norton의 균형성과표(BSC) 측정방식을 응용하였다. 이를 위해서 연구자는 실험적이고 확정적인 요인 분석을 실시하여 성과측정요인을 생성하였고, 이들 측정요인들의 신뢰성과 타당성을 조사하였다. 92개 종합병원급 의료기관 중에서 56개의 병원으로부터 유효한 설문지에 대한 답을 얻었다. 요인분석으로 성과측정지표를 개발한 후에는 이들 요인들 사이의 우선순위를 결정하기 위하여 계층분석기법(AHP)을 사용하였다. AHP 분석의 결과로 우리는 성과측정요인과 그의 핵심성과지표들의 중요도에 따라 정렬된 리스트를 볼 수 있었다. 본 연구의 결과는 급변하는 의료환경에서 각 의료기관들이 경쟁력을 확보하기 위한 경영전략의 하나로 채택하고 있는 경영성과분석 전략의 방향과 기준을 제시할 수 있다.