• 한국멀티미디어학회논문지
• /
• 제12권11호
• /
• pp.1661-1670
• /
• 2009

애니메이션에서 등장한 의인화 동물과 인간의 비언어적 커뮤니케이션을 비교분석하여 동물캐릭터와 인간 캐릭터에서 표현되는 제스처의 차이점과 동물이 의인화 되었을 경우 인간과 유사한 정도를 연구하였다. 이를 기반으로 의인화에서 표현될 수 있는 유형을 인간에 가장 유사한 인간형과 동물에 가까운 동물형 그리고 두 가지 특징을 모두 포함한 혼합형 3가지로 분류하였다. 또한 의인화유형을 특징별로 세분화하여 동물캐릭터의 의인화 단계를 7단계로 제안하였다. 본 논문은 캐릭터설계자에게 동물캐릭터의 의인화에 대한 다양한 해석의 시각을 제공한다. 그리고 의인화된 동물캐릭터 설계용 데이터베이스 시스템 구축과 의인화 캐릭터를 활용한 애니메이션 자동화에 기초를 제공할 것으로 기대된다.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1484-1494
• /
• 2017

We present a two-stage inverter with high step-up conversion ratio engaging modified finite-set Model Predictive Control (MPC) for utility-integrated photovoltaic (PV) applications. The anticipated arrangement is fit for low power PV uses, the calculated efficiency at 150 W input power and 19 times boosting ratio was around 94%. The suggested high-gain dc-dc converter based on Cockcroft-Walton multiplier constitutes the first-stage of the offered structure, due to its high step-up ability. It can boost the input voltage up to 20 times. The 3S current-source inverter constitutes the second-stage. The 3S current-source inverter hires three semiconductor switches, in which one is functioning at high-frequency and the others are operating at fundamental-frequency. The high-switching pulses are varied in the procedure of unidirectional sine-wave to engender a current coordinated with the utility-voltage. The unidirectional current is shaped into alternating current by the synchronized push-pull configuration. The MPC process are intended to control the scheme and achieve the subsequent tasks, take out the Maximum Power (MP) from the PV, step-up the PV voltage, and introduces low current with low Total Harmonic Distortion (THD) and with unity power factor with the grid voltage.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.77-88
• /
• 2017

Correction Factor Method (CFM) is one of the earliest methods for simulating the actual behavior of structure according to construction sequences and practical implementation steps of the construction process which corrects the results of the conventional analysis just by the application of correction factors. The most important advantages of CFM are the simplicity and time-efficiency of the computations in estimating the final modified forces of the beams. However, considerable inaccuracy in evaluating the internal forces of the other structural members obtained by the moment equilibrium equation in the connection joints is the biggest disadvantage of the method. This paper proposes a novel method to eliminate the aforementioned defect of CFM by using the column shortening correction factors of the CFM to modify the axial stiffness of columns. In this method, the effects of construction sequences are considered by performing a single step analysis which is more time-efficient when compared to the staged analysis especially in tall buildings with higher number of elements. In order to validate the proposed method, three structures with different properties are chosen and their behaviors are investigated by application of all four methods of: conventional one-step analysis, sequential construction analysis (SCA), CFM, and currently proposed method.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.256-263
• /
• 1998

Among process synthesis problems, the heat exchanger network (HEN) has been subjected to the most concentrated effort because this kind of problems was well defined for solving it and 20-30% energy savings could be realized in the present chemical processes. In this paper, we use an evolutionary approach for HEN synthesis because this approach can overcome the local optimum and combine some heuristic rules. The basic evolutionary approach is composed of three parts, that is, initialization step, growth step and mutation step, as in the simulated annealing and genetic algorithm. This algorithm uses the ecological rule that a better cell will live and worse cell should decompose after repeated generations. With this basic concept, a new procedure is developed and a more efficient method is proposed to generate initial solutions. Its effectiveness is shown using test examples.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.929-933
• /
• 1997

Morphological studies in the micro-end-to-end (m-E-E) and micro-side-by-side (m-S-S) aggregations were conducted by using of scanning electron microscope (SEM) for the samples precipitated by heating of the end-products of the transition of FormⅡ (left-handed helix, three peptides per turn, 31) Form Ⅰ (right-handed helix, 3.3 peptides per turn, 103) in poly(L-proline) (PLP) in acetic acid(water)-propanol (1:9 v/v) solvent. The observed morphology for the solide state shows a rope (or super helical) type and pebbles type aggregate for the (m-E-E) and (m-S-S) aggregate respectively. The viscosities were also measured during the heat-precipitation in order to elucidate the process of formation of the rope- and pebbles-type aggregates. The result for the (m-E-E) aggregations exhibit two steps, i.e., at first, the viscosity increases with time (step 1), thereafter it decrease until attain the last value (step 2). But the (m-S-S) aggregations show only one step in the decreases in viscosity. On the bases of all experimental results it is possible to propose a reasonable mechanism for the formation of the two types of aggregates of the (m-E-E) and (m-S-S).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.812-815
• /
• 2005

The incremental forming process employs several tens or hundreds of continuous local strokes, so the entire process is difficult to analyze due to much computation time and large computer memory. The objective of this work is to propose a new numerical scheme of the finite element method, automatic expansion of domain (AED), and to reduce computation time and computer memory. In the AED scheme, an effective analysis domain in each local forming step is defined and then the domain is automatically expanded in accordance with the repeated process. In order to verify the validity of the criterion for the AED scheme and the applicability of the AED scheme, two-dimensional incremental plane-strain forging process is first analyzed using the proposed scheme with various criteria and full domain. In addition, three-dimensional incremental radial forging process is analyzed to verify the applicability of the proposed scheme to a practical incremental forging process.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.165-169
• /
• 2007

Compared to conventional Indium Tin Oxide (ITO) film deposition methods, cesium (Cs) assisted sputtering offers higher film characteristics in terms of electrical, mechanical and optical properties. However, it showed highly non-linear characteristics between process input factors and equipment responses. Therefore, to maximize film quality, optimization of manufacturing process is essential and process characterization is the first step for process optimization. For this, we designed 2 level design of experiment (DOE) to analyze ITO film characteristics including film thickness, resistivity and transmittance. DC power, pressure, carrier flow, Cs temperature and substrate temperature were selected for process input variables. Through statistical effect analysis methods, relation between three types of ITO film characteristics and five kinds of process inputs are successfully characterized and eventually, it can be used to optimize Cs assisted sputtering processes for various types of film deposition.

• 지역사회간호학회지
• /
• 제32권1호
• /
• pp.73-85
• /
• 2021

Purpose: The purpose of this qualitative study is to explore the adaptation process of correctional officers' job stress. Methods: Participants collected were fourteen officers who had experienced the adaptation process of job stress. Data were collected through individual in-depth interviews until the point of theoretical saturation from May to August, 2017. Transcribed interview contents were analyzed using Corbin and Strauss' grounded theory method. Results: A total of 98 concepts, 27 subcategories, and 10 categories were identified through the open coding. As a result of axial coding based on the paradigm model, the job stress adaptation process centering phenomenon of correctional officers was revealed as 'repeat-mark hardening', and the core category was extracted as 'endurance in hardening' consisting of a three-step process: enduring, understanding prisoner management procedures, and rebuilding. The rebuilding was considered as the key phase to escape the repeat-mark hardening and the participants utilized various strategies such as finding fun elsewhere, restoring confidence, accepting values of the prison officer in this phase. Conclusion: The results of this study suggest that the adaptation process of correctional officers' job stress can be a process that endurance the hardening. Therefore, it is necessary to develop systematic practical education and vocational motivation programs.

• 센서학회지
• /
• 제31권6호
• /
• pp.361-365
• /
• 2022

Advanced packaging demands are driven by the need for dense integration systems. Consequently, stacked packaging technology has been proposed instead of reducing the ultra-fine patterns to secure economic feasibility. This study proposed an effective packaging process technology for semiconductor devices using a 9-inch dicing die attach film (DDAF), wherein the die attach and dicing films were combined. The process involved three steps: tape lamination, dicing, and bonding. Following the grinding of a silicon wafer, the tape lamination process was conducted, and the DDAF was arranged. Subsequently, a silicon wafer attached to the DDAF was separated into dies employing a blade dicing process with a two-step cut. Thereafter, one separated die was bonded with the other die as a substrate at 130 ℃ for 2 s under a pressure of 2 kgf and the chip was hardened at 120 ℃ for 30 min under a pressure of 10 kPa to remove air bubbles within the DAF. Finally, a curing process was conducted at 175 ℃ for 2 h at atmospheric pressure. Upon completing the manufacturing processes, external inspections, cross-sectional analyses, and thermal stability evaluations were conducted to confirm the optimality of the proposed technology for application of the DDAF. In particular, the shear strength test was evaluated to obtain an average of 9,905 Pa from 17 samples. Consequently, a 3D integration packaging process using DDAF is expected to be utilized as an advanced packaging technology with high reliability.

• 전자공학회논문지
• /
• 제51권2호
• /
• pp.173-181
• /
• 2014

본 논문은 흉부 CT에서 폐, 기관지 및 폐혈관을 자동으로 분할 할 수 있는 알고리즘을 제안 하였다. 제안된 방법은 3단계로 진행된다. 첫째는 최적 임계값과 3차원 레이블링을 통한 영역성장법으로 폐 및 기관지를 분할한다. 둘째는 기관지의 형태학적 정보를 활용하여 기관지의 첫 번째 분기점(용골)까지는 차감연산으로, 이후부터는 가변적 임계값 기법을 적용하여 기관지를 분할한다. 셋째는 폐에 대한 복원 과정으로 좌/우측 폐를 분리하고, 개선된 롤링 볼 알고리즘을 적용하여 폐 외곽의 이상 유무를 확인하며, 이상이 발견되면 그 부분을 제거하고, 2차 다항식 형태로 폐 외곽을 연결시킴으로서 정상적인 폐로 복원한다. 마지막으로 폐혈관은 임계 값 기법의 3 차원 레이블링과 3 차원 영역성장법을 적용하여 분할하였다. 시뮬레이션 결과 폐 주변조직의 손실 없이 정확하게 분할됨을 확인 할 수 있었다.