• 한국축산식품학회지
• /
• 제33권6호
• /
• pp.744-751
• /
• 2013

The objective of this study was to assess the physicochemical and sensory changes of a kefir manufactured by a two-step fermentation (MTY, $1^{st}$ step: $37^{\circ}C$ for 9 h; $2^{nd}$ step: $24^{\circ}C$ for 15 h) and compare it with kefirs produced by two conventional methods (GTY, fermentation at $37^{\circ}C$ for 24 h; KEY, $22^{\circ}C$ for 24 h). Rapid changes in pH and titratable acidity (TA) were observed in samples from all three manufacturing methods during fermentation process and storage period. Lactic acid bacteria (LAB) counts of MTY increased gradually up to 12 h of fermentation, reaching 9.28 Log CFU/mL, with maximum value observed in this experiment of 9.48 Log CFU/mL. The LAB counts of all samples decreased significantly during storage. The highest viscosity was observed for MTY (1750-1771 cPs), compared with the lowest viscosity observed for KEY (1250-1277 cPs). The viscosity of all samples increased slightly during storage (1250-1805 cPs, p<0.05), as well as carbon dioxide content (0.01-1.36%, p<0.05), except for GTY. The most significant increase in alcohol concentration during storage period was seen in MTY from 0.01% to 1.36% (p<0.05). MTY scored significantly higher in most items of the sensory analysis, indicating that the product manufactured by the two-step fermentation method is more acceptable compared with conventionally produced kefirs.

• 대한건축학회논문집:계획계
• /
• 제34권12호
• /
• pp.77-84
• /
• 2018

Biomimicry architecture has been highlighted in recent years for the innovative ideas from the nature have provided main developments in many areas. The related studies in Korean architecture is entering the first step and are needed close attentions for its vitalizations. This study starts with the acknowledgement of necessity to establish the architectural application process. First of all, it is named as a 'Passive Cycle' if a problem-solving or a project has been through the analysis of process complexity and biomimicry application process in other areas. Then, the basic frame is structured as a 'Process-Cooperation,' which integrates process complexation with process circulation. The cooperative relationship starts from the beginning of the design with not only professionalists related with architecture but also ones in various areas when it is issued a difficult problem or high environmental performance not found in common architectural design processes. To make the architectural application good progress, the characteristics of bio-mimetic architectural applications are categorized as three areas; the expected effect, the application level, and application method. As a result, the organic complexity should be prioritized to have bio-mimetic application effectively while accessing the principles. Therefore, the process for the architectural application of biomimicry is suggested as 'Organic Cycle-Cooperation.'

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.258-265
• /
• 2017

This paper validates a system identification method using mathematical optimization using sea trial measurement data as a benchmark. A fast time simulation tool, SIMOPT, and a Rheinmetall Defence mathematical model have been adopted to conduct initial hydrodynamic coefficient estimation and simulate ship modelling. Calibration for the environmental effect of sea trial measurement and sensitivity analysis have been carried out to enable a simple and efficient optimization process. The optimization process consists of three steps, and each step controls different coefficients according to the corresponding manoeuvre. Optimization result of Step 1, an optimization for coefficient on x-axis, was similar compared to values applying an empirical regression formulae by Clarke and Norrbin, which is used for SIMOPT. Results of Steps 2 and 3, which are for linear coefficients and nonlinear coefficients, respectively, was differ from the calculation results of the method by Clarke and Norrbin. A comparison for ship trajectory of simulation results from the benchmark and optimization results indicated that the suggested stepwise optimization method enables a coefficient tuning in a mathematical way.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.214-220
• /
• 2019

Thermochemical cycles have been predominantly used for energy transformation from heat to stored chemical free energy in the form of hydrogen. The thermochemical cycle based on uranium (UTC), proposed by Oak Ridge National Laboratory, has been considered as a better alternative compared to other thermochemical cycles mainly due to its safety and high efficiency. UTC process includes three steps, in which only the first step is unique. Hydrogen production apparatus with hectogram reactants was designed in this study. The results showed that high yield hydrogen was obtained, which was determined by drainage method. The results also indicated that the chemical conversion rate of hydrogen production was in direct proportion to the mass of $Na_2CO_3$, while the solid product was $Na_2UO_4$, instead of $Na_2U_2O_7$. Nevertheless the thermochemical cycle used for hydrogen generation can be closed, and chemical compounds used in these processes can also be recycled. So the cycle with $Na_2UO_4$ as its first reaction product has an advantage over the proposed UTC process, attributed to the fast reaction rate and high hydrogen yield in the first reaction step.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.336-339
• /
• 2006

In this paper, the preliminary transfer orbit analysis results for the COMS mission were presented. As the first step of transfer orbit analysis, the preliminary analyses of LAE burn strategy, geometrical visibility, and launch window were performed. For the analysis process, all launcher nominates were divided into three groups according to the declination of LAE thrust angle. So, the three launch cases were assigned as the representative launcher of each group, respectively. They are Ariane-5, Atlas summer and winter launch cases. And all analyses were performed at the representative launcher of each group. One nominal and three back-up plans were considered for the establishment of LAE burn strategy. And for geometrical visibility analysis, four TT&C ground stations were considered. Finally, the preliminary launch window analysis was performed about the duration of one year from the first day of September 2008. The analysis results show that the all launch cases comply with the transfer orbit operation requirements.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.72-75
• /
• 2009

Design and Manufacturing processes of Ti-6Al-4V profiled ring-products were investigated with three-dimensional FEM simulation and experimental analyses. FEM simulation for the ring-rolling process was used to calculate the state variables such as strain, strain rate and temperature. In the simulation results of strain and temperature distributions for a plane ring rolling process, the strain level at the surface area is higher than that at the mid-plane, but the temperature level at the surface area is lower than that at mid-plane due to heat transfer between the workpiece and the work roll. These distributions showed a great influence on the evolution of microstructure in different positions. In order to induce the uniform deformation of the profile ring and reduce the applied load, the final blank was prepared by two-step processes. The mechanical properties of Ti-6Al-4V alloy ring products made in this work were investigated with tensile and impact tests and analyzed with the evolution of microstructures during the ring rolling process.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.421-425
• /
• 2003

환원추출 공정은 소멸처리로의 연료를 제조하는 과정에서 전해분리된 TRU 성분을 추가로 정제하기 위해 이용된다. 본 연구에서는 용융염과 Bi 금속사이의 환원추출되는 과정에 대하여 조사하였다. TRU의 대체연구물인 지르코늄과 희토류 원소들이 용질로 이용되었으며, 환원제인 Li은 Bi와 미리 합금을 만들어 사용하였다. 모든 실험은 아르곤 가스가 채워진 글로브박스내에서 수행되었으며, 분석을 위해 ICP, XRD 및 EPMA 등이 이용되었다 Li 투입 후 3시간 이내에 환원추출 반응이 평형에 도달하였다. 세가지 용융염 시스템의 비교실험에서 3가지 용융염 시스템 모두에서 지르코늄이 희토류 원소들로부터 잘 분리되었다.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.8-13
• /
• 2002

Controlled precipitation of quasi-binary semiconductor system is newly proposed as an effective and reliable technique for the formation of well-defined and crystallographically aligned semiconductor nanostructures. Using HgTe-PbTe quasi-binary semiconductor system, self-aligned HgTe nanocrystallites distributed three dimensionally within PbTe matrix were successfully formed by the simple three step heat treatment process routinely found in age hardening process of metallic alloys. Examination of the resulting nano precipitates using conventional transmission electron microscopy (CTEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the (100) habit planes making a crystallographic relation of {100}$\_$HgTe///{100}$\_$PbTe/ and [100]$\_$HgTe///[100]$\_$PbTe/. It is also found that the precipitate undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4-5 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for preparing desirable quantum-dot nanostructures.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 추계학술대회 학술발표 논문집 제14권 제2호
• /
• pp.553-559
• /
• 2004

In todays security industry, personal identification is also based on biometric. Biometric identification is performed basing on the measurement and comparison of physiological and behavioral characteristics, Biometric for recognition includes voice dynamics, signature dynamics, hand geometry, fingerprint, iris, etc. Iris can serve as a kind of living passport or living password. Iris recognition system is the one of the most reliable biometrics recognition system. This is applied to client/server system such as the electronic commerce and electronic banking from stand-alone system or networks, ATMs, etc. A new algorithm using nonlinear function in recognition process is proposed in this paper. An algorithm is proposed to determine the localized iris from the iris image received from iris input camera in client. For the first step, the algorithm determines the center of pupil. For the second step, the algorithm determines the outer boundary of the iris and the pupillary boundary. The localized iris area is transform into polar coordinates. After performing three times Wavelet transformation, normalization was done using sigmoid function. The converting binary process performs normalized value of pixel from 0 to 255 to be binary value, and then the converting binary process is compare pairs of two adjacent pixels. The binary code of the iris is transmitted to the by server. the network. In the server, the comparing process compares the binary value of presented iris to the reference value in the University database. Process of recognition or rejection is dependent on the value of Hamming Distance. After matching the binary value of presented iris with the database stored in the server, the result is transmitted to the client.