• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1661-1670
• /
• 2009

In this paper, by analyzing the nonverbal communication of personified animals and human animation characters, the differences of gesture and the amount of similarity between personified animal characters and human characters were studied. Accordingly, personified characters were classified into three categories: humanoid characters, animal-like characters and mixed-type characters which possess characteristics of both human and animals. Furthermore, we proposed a 7-step process for the personification of animal characters. Diverse information of personification was provided for animation designers in this paper. A DB system for animal character designing and automation for animation utilizing personified characters are expected to be constructed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1484-1494
• /
• 2017

We present a two-stage inverter with high step-up conversion ratio engaging modified finite-set Model Predictive Control (MPC) for utility-integrated photovoltaic (PV) applications. The anticipated arrangement is fit for low power PV uses, the calculated efficiency at 150 W input power and 19 times boosting ratio was around 94%. The suggested high-gain dc-dc converter based on Cockcroft-Walton multiplier constitutes the first-stage of the offered structure, due to its high step-up ability. It can boost the input voltage up to 20 times. The 3S current-source inverter constitutes the second-stage. The 3S current-source inverter hires three semiconductor switches, in which one is functioning at high-frequency and the others are operating at fundamental-frequency. The high-switching pulses are varied in the procedure of unidirectional sine-wave to engender a current coordinated with the utility-voltage. The unidirectional current is shaped into alternating current by the synchronized push-pull configuration. The MPC process are intended to control the scheme and achieve the subsequent tasks, take out the Maximum Power (MP) from the PV, step-up the PV voltage, and introduces low current with low Total Harmonic Distortion (THD) and with unity power factor with the grid voltage.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.77-88
• /
• 2017

Correction Factor Method (CFM) is one of the earliest methods for simulating the actual behavior of structure according to construction sequences and practical implementation steps of the construction process which corrects the results of the conventional analysis just by the application of correction factors. The most important advantages of CFM are the simplicity and time-efficiency of the computations in estimating the final modified forces of the beams. However, considerable inaccuracy in evaluating the internal forces of the other structural members obtained by the moment equilibrium equation in the connection joints is the biggest disadvantage of the method. This paper proposes a novel method to eliminate the aforementioned defect of CFM by using the column shortening correction factors of the CFM to modify the axial stiffness of columns. In this method, the effects of construction sequences are considered by performing a single step analysis which is more time-efficient when compared to the staged analysis especially in tall buildings with higher number of elements. In order to validate the proposed method, three structures with different properties are chosen and their behaviors are investigated by application of all four methods of: conventional one-step analysis, sequential construction analysis (SCA), CFM, and currently proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.256-263
• /
• 1998

Among process synthesis problems, the heat exchanger network (HEN) has been subjected to the most concentrated effort because this kind of problems was well defined for solving it and 20-30% energy savings could be realized in the present chemical processes. In this paper, we use an evolutionary approach for HEN synthesis because this approach can overcome the local optimum and combine some heuristic rules. The basic evolutionary approach is composed of three parts, that is, initialization step, growth step and mutation step, as in the simulated annealing and genetic algorithm. This algorithm uses the ecological rule that a better cell will live and worse cell should decompose after repeated generations. With this basic concept, a new procedure is developed and a more efficient method is proposed to generate initial solutions. Its effectiveness is shown using test examples.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.9
• /
• pp.929-933
• /
• 1997

Morphological studies in the micro-end-to-end (m-E-E) and micro-side-by-side (m-S-S) aggregations were conducted by using of scanning electron microscope (SEM) for the samples precipitated by heating of the end-products of the transition of FormⅡ (left-handed helix, three peptides per turn, 31) Form Ⅰ (right-handed helix, 3.3 peptides per turn, 103) in poly(L-proline) (PLP) in acetic acid(water)-propanol (1:9 v/v) solvent. The observed morphology for the solide state shows a rope (or super helical) type and pebbles type aggregate for the (m-E-E) and (m-S-S) aggregate respectively. The viscosities were also measured during the heat-precipitation in order to elucidate the process of formation of the rope- and pebbles-type aggregates. The result for the (m-E-E) aggregations exhibit two steps, i.e., at first, the viscosity increases with time (step 1), thereafter it decrease until attain the last value (step 2). But the (m-S-S) aggregations show only one step in the decreases in viscosity. On the bases of all experimental results it is possible to propose a reasonable mechanism for the formation of the two types of aggregates of the (m-E-E) and (m-S-S).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.812-815
• /
• 2005

The incremental forming process employs several tens or hundreds of continuous local strokes, so the entire process is difficult to analyze due to much computation time and large computer memory. The objective of this work is to propose a new numerical scheme of the finite element method, automatic expansion of domain (AED), and to reduce computation time and computer memory. In the AED scheme, an effective analysis domain in each local forming step is defined and then the domain is automatically expanded in accordance with the repeated process. In order to verify the validity of the criterion for the AED scheme and the applicability of the AED scheme, two-dimensional incremental plane-strain forging process is first analyzed using the proposed scheme with various criteria and full domain. In addition, three-dimensional incremental radial forging process is analyzed to verify the applicability of the proposed scheme to a practical incremental forging process.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.4
• /
• pp.165-169
• /
• 2007

Compared to conventional Indium Tin Oxide (ITO) film deposition methods, cesium (Cs) assisted sputtering offers higher film characteristics in terms of electrical, mechanical and optical properties. However, it showed highly non-linear characteristics between process input factors and equipment responses. Therefore, to maximize film quality, optimization of manufacturing process is essential and process characterization is the first step for process optimization. For this, we designed 2 level design of experiment (DOE) to analyze ITO film characteristics including film thickness, resistivity and transmittance. DC power, pressure, carrier flow, Cs temperature and substrate temperature were selected for process input variables. Through statistical effect analysis methods, relation between three types of ITO film characteristics and five kinds of process inputs are successfully characterized and eventually, it can be used to optimize Cs assisted sputtering processes for various types of film deposition.

• Research in Community and Public Health Nursing
• /
• v.32 no.1
• /
• pp.73-85
• /
• 2021

Purpose: The purpose of this qualitative study is to explore the adaptation process of correctional officers' job stress. Methods: Participants collected were fourteen officers who had experienced the adaptation process of job stress. Data were collected through individual in-depth interviews until the point of theoretical saturation from May to August, 2017. Transcribed interview contents were analyzed using Corbin and Strauss' grounded theory method. Results: A total of 98 concepts, 27 subcategories, and 10 categories were identified through the open coding. As a result of axial coding based on the paradigm model, the job stress adaptation process centering phenomenon of correctional officers was revealed as 'repeat-mark hardening', and the core category was extracted as 'endurance in hardening' consisting of a three-step process: enduring, understanding prisoner management procedures, and rebuilding. The rebuilding was considered as the key phase to escape the repeat-mark hardening and the participants utilized various strategies such as finding fun elsewhere, restoring confidence, accepting values of the prison officer in this phase. Conclusion: The results of this study suggest that the adaptation process of correctional officers' job stress can be a process that endurance the hardening. Therefore, it is necessary to develop systematic practical education and vocational motivation programs.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.361-365
• /
• 2022

Advanced packaging demands are driven by the need for dense integration systems. Consequently, stacked packaging technology has been proposed instead of reducing the ultra-fine patterns to secure economic feasibility. This study proposed an effective packaging process technology for semiconductor devices using a 9-inch dicing die attach film (DDAF), wherein the die attach and dicing films were combined. The process involved three steps: tape lamination, dicing, and bonding. Following the grinding of a silicon wafer, the tape lamination process was conducted, and the DDAF was arranged. Subsequently, a silicon wafer attached to the DDAF was separated into dies employing a blade dicing process with a two-step cut. Thereafter, one separated die was bonded with the other die as a substrate at 130 ℃ for 2 s under a pressure of 2 kgf and the chip was hardened at 120 ℃ for 30 min under a pressure of 10 kPa to remove air bubbles within the DAF. Finally, a curing process was conducted at 175 ℃ for 2 h at atmospheric pressure. Upon completing the manufacturing processes, external inspections, cross-sectional analyses, and thermal stability evaluations were conducted to confirm the optimality of the proposed technology for application of the DDAF. In particular, the shear strength test was evaluated to obtain an average of 9,905 Pa from 17 samples. Consequently, a 3D integration packaging process using DDAF is expected to be utilized as an advanced packaging technology with high reliability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.173-181
• /
• 2014

In this paper, the algorithm that can automatically segment the lung, the airway and the pulmonary vessels in a chest CT was proposed. The proposed method is progressed in three steps. In the first step, the lung and the airway are segmented by the region growing law through the optimal threshold and three-dimensional labeling. In the second, from the start point to the first carina of the airway is segmented by the deduction operation, and the next airway of the bifurcations are segmented by applying a variable threshold technique. In the third step, the left/right lungs are divided by the restoration process for the lung, and the outside of lungs for abnormal is checked by applying the advanced rolling ball algorithm, and if abnormal is found, that part is removed, and it is restored to the normal lungs by connecting the outside of the lung in the form of second-order polynomial. Finally, pulmonary vessels are segmented by applying the three-dimensional connected component labeling method and three-dimensional region growing method. As the results of simulation, it could be confirmed that the pulmonary vascular is accurately divided without loss of tissue around lung.