• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.865-876
• /
• 2004

A new concept of reduced quasi-dimensional combustion model for a direct injection diesel engine is developed based on the previously developed quasi-dimensional multi-zone model to improve the computational efficiency. In the reduced model, spray penetration and air entrainment are calculated for a number of zones within the spray while three zones with aggregated spray zone concept are used for the calculation of spray combustion and emission formation processes. It is also assumed that liquid phase fuel appears only near the nozzle exit during the breakup period and that spray vaporization is immediate in order to reduce the computational time. Validation of the reduced model with experimental data demonstrated that the new model can predict engine performance and NO and soot emissions reasonably well compared to the original model. With the new concept of reduced model, computational efficiency is significantly improved as much as 200 times compared to the original model.

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.195-202
• /
• 2011

본 연구의 목적은 차종별 교통류 모형을 이용한 편도 2차로 고속도로 공사구간의 용량 값을 산정하는 것이다. 공사구간의 교통류 모형은 공사구간의 유입부 및 유출부를 대상으로 차종별 모형과 승용차 환산계수를 적용한 전체 차량에 대한 모형으로 도출하였다. 차종별 모형에서 산정된 최대교통류율은 승용차환산계수 및 중차량 비율을 적용하여 공사구간의 용량 값으로 전환하였다. 차종별 모형의 유입부 및 유출부 최대교통류율 값은 각각 1,845pcphpl과 1,884pcphpl로 산정되었으며 차량 전체를 대상으로 한 모형의 최대교통류율은 차종별 결과보다 높게 분석되었다. 모형의 비교 검증을 위하여 최대밀도에 따른 거리 차두간격을 적용하였다. 공사구간의 용량은 공사구간의 흐름이 안정된 유출부 용량보다 공사구간 진입을 위한 차선 변경 등으로 교통흐름이 원활하지 못한 유입부 용량에 좌우되므로 유입부 교통류 모형의 최대교통류율 값인 1,800pcphpl을 편도 2차로 고속도로 공사구간 용량 값으로 산정하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• ETRI Journal
• /
• 제40권6호
• /
• pp.736-744
• /
• 2018

This study considers zone-based registration (ZBR), which is adopted by most mobile cellular networks. In ZBR, a user equipment (UE) registers its location area (or zone) in a network database (DB) whenever it enters a new zone. Even though ZBR is implemented in most networks for a UE to keep only one zone (1ZR), it is also possible for a UE to keep multiple zones. Therefore, a ZBR with two zones (2ZR) is investigated, and some mathematical models for 2ZR are presented. With respect to ZBR with three zones (3ZR), several studies have been reported, but these employed computer simulations owing to the complexity of the cases, and there have been no reports on a mathematical 3ZR model to analyze its performance. In this study, we propose a new mathematical model for 3ZR for the first time, and analyze the performance of 3ZR using this model. The numerical results for various scenarios show that, as the UE frequently enters zones, the proposed 3ZR model outperforms 1ZR and 2ZR. Our results help determine the optimal number of zones that a UE keeps, and minimize the signaling cost for radio channels in mobile cellular networks.

• 한국환경과학회지
• /
• 제23권9호
• /
• pp.1537-1549
• /
• 2014

The objectives of this study were to analyze reservoir trophic state, based on Trophic State Index (TSI), spatial variation patterns of three zones (riverine, transition, and lacustrine zone), and empirical models through 20-years long-term data analysis. Trophic variables of TP and CHL-a were highest during the summer monsoon, and decreased along the main axis from the riverine to lacustrine zone. In the mean time, TN did not show the trend. Ratios of N:P and Secchi disc transparency (SD) increased from the riverine to lacustrine zone. The analysis of trophic state index (TSI) showed that mean TSI (TP) and TSI (CHL-a) were 62 and 57, respectively, and these values were highest in the transition zone during the summer. This zone should be managed well due to highest lake water pollution. The analysis of Trophic State Index Deviation (TSID) showed that algal growth was primarily limited by light penetration, and this was most pronounced in the monsoon season. The analysis of empirical models showed that the value of $R^2$, based on CHL-SD model, was 0.30 (p < 0.0001) in the transition zone and the $R^2$, based on TP-SD model, was 0.41 (p < 0.0001) in the transition zone.

• 한국지반공학회지:지반
• /
• 제7권3호
• /
• pp.21-32
• /
• 1991

본 연구에서는 복합 zone을 가진 rockfill dam성토 재료의 강도정수들과 core zone에서의 간극 수압의 불확정성을 고려할 수 있도록, 성토 재료의 공간적인 변화의 불확실성, 시료수의 제한에 의 한 불확정성에 실험실 결과와 현장 결과와의 차이에 따른 model 오차의 영향을 고려한 종합적인 설계변수들의 불확정성을 규명하였으며 core zone의 간극수압과 rockfill zone의 내부 마찰각을 bayeg 이론을 이용하여 불확정성을 Updating할 수 있는 방법을 제시하였다. 사면 안정 해석에서 시공직후 상, 하류, 만수위 상, 하류 수위, 급강하 시의 2차원 사면안정해석 과 end effect 영향을 고려한 3차원사면 안정해석을 하였다. 본 목적을 위하여 복합 zone을 가진 rockfill dam의 사면 안정해석에서 end effect의 영향을 고려한 3차원 사면안정해석 Program인 "ESTABL"을 개발하였으며, 파괴 사면의 강도정수와 간극수압의 변동계수를 구하는 프로그램 "COV", 복합 zone사면 안전율의 변동계수를 구하는 프로그램 "PCOV"을 개발하였다. 사면안정해석 결과 3차원안전율이 2차원안전율보다 약 200A정도 크게 나타나므로 end restraint 효과가 상당히 큼을 알 수 있다. 3차원사면안정은 근본적으로 system reliability 문제이 므로 안전율의 평균간보다 그 불확정성이 더 큰 영향을 미침을 보여준다. 또한 기초설계 치로 설계 를 마친후 시공중 혹은 추가로 각종 계측치가 있을 때 updating 이론을 이용하여 신뢰도를 증가시 킬 수 있음을 보여주며 강도계수의 변화에 의한 파괴확률의 변화는 점착력의 불확정성이 내부마찰 각의 불확정성보다 민감하게 영향을 미침을 보여준다.찰 각의 불확정성보다 민감하게 영향을 미침을 보여준다.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.64-72
• /
• 1993

Analytical models for the prediction of the size of hardened zone in laser surface hardening are presented. The models are based on the solutions to the problem of three-dimensional heat flow in plates with infinite thickness. The validity of the model was tested on medium carbon steel for Gaussian mode of beam. Then the model for rectagular beam was used for the predicition of the size of hardened zone on various hardening process parameters. From the calculation results it appeared that the size and shape of the hardened zone are strongly dependent on process parameters such as beam mode, beam size, and traverse speed.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.179-187
• /
• 2024

In this paper, a unified time-dependent constitutive model of Darcy flow and non-Darcy flow is proposed. The influencing factors of flow velocity are discussed, which demonstrates that permeability coefficient is the most significant factor. Based on this, the dynamic evolution characteristics of water inrush during tunneling through fault fracture zone is analyzed under the constant permeability coefficient condition (CPCC). It indicates that the curves of flow velocity and hydrostatic pressure can be divided into typical three stages: approximate high-velocity zone inside the fault fracture zone, velocity-rising zone near the tunnel excavation face and attenuation-low velocity zone in the tunnel. Furthermore, given the variation of permeability coefficient of the fault fracture zone with depth and time, the dynamic evolution of water flow in the fault fracture zone under the variable permeability coefficient condition (VPCC) is also studied. The results show that the time-related factor (α) affects the dynamic evolution distribution of flow velocity with time, the depth-related factor (A) is the key factor to the dynamic evolution of hydrostatic pressure.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.75-83
• /
• 2015

PURPOSES : This study deals with the traffic accidents classified by the traffic analysis zone. The purpose is to develop the accident density models by using zonal traffic and socioeconomic data. METHODS : The traffic accident density models are developed through multiple linear regression analysis. In this study, three multiple linear models were developed. The dependent variable was traffic accident density, which is a measure of the relative distribution of traffic accidents. The independent variables were various traffic and socioeconomic variables. CONCLUSIONS : Three traffic accident density models were developed, and all models were statistically significant. Road length, trip production volume, intersections, van ratio, and number of vehicles per person in the transportation-based model were analyzed to be positive to the accident. Residential and commercial area ratio and transportation vulnerability ratio obtained using the socioeconomic-based model were found to affect the accident. The major arterial road ratio, trip production volume, intersection, van ratio, commercial ratio, and number of companies in the integrated model were also found to be related to the accident.

• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.683-695
• /
• 1997

본 연구는 강제 라멘교각 접합부 panel zone의 전단거동특성에 대하여 검토한 것이다. 여기에서는 접합부 시험체 20개에 대한 재하실험 결과와 3가지의 FEM해석 모델에 대한 결과를 제시 하였다. 이와같은 실험및 해석결과를 비교 검토한 결과, panel zone의 강도와 변형 성능은 단면적비와 전단좌굴등에 의하여 감소하는 경향을 보이고 있음을 알 수 있었다. 따라서 본 연구에서는 이상의 결과를 기초로 panel zone의 강도와 변형성능에 대한 새로운 평가식을 제안하였으며, 또한 기존의 라멘교각 접합부에 대한 변형성능에 관해서 검토하였다.