• Radiation Oncology Journal
• /
• 제7권1호
• /
• pp.133-140
• /
• 1989

Three-dimension paraffin compensator was designed to construct the tissue equivalent compensator for irregular body contours and obiliques beam incidence. The ratio of compensator thickness to tissue deficit was depended on field size, depth and air gap because the scattered dose loss. The ratio of compensator-tissue was optimized 0.79, 0.73, 0.61 and 0.56 in 6MV x-rays as function of field size $4{\times}4$, $10{\times}10$, $20{\times}20$ and $30{\times}30cm^2$ respectively. in our study. Using this tissue equivalent compensator, it can be got 2% difference of dose at same mid-plane in phantom study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.25-26
• /
• 2006

The method measuring the absolute position of a point diffraction source emitting a spherical wavefront in three-dimension is proposed. Two-dimensional interference of spherical wavefronts is used to overcome ambiguity of phase order. The spherical wavefront is explicated by Taylor series expansion, from which a radius of curvature of a spherical wavefront and its center position in three-dimension are obtainable. The spherical wavefront is reconstructed by a modified lateral shearing interferometer, which uses single-mode fiber as a point diffraction source.

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.20-27
• /
• 2010

The purpose of this study was to compare the consistency of external ear measurements obtained by electronic digital caliper, photocopier scanning and digital photographic methods. Photogrammetric measurements were made after image editing software was used to optimize the brightness, contrast, size and image clarity. The CorelDRAW dimension tool was used to create a dimension line that measured the vertical and horizontal length between any two landmarks. Results of repeated measures analysis of variance revealed no significant differences in length and width of the pinna between the three methods. The reliability of the three measurement techniques showed a high degree of consistency. Further study and efforts could be extended to measurement hands, foots and facial dimensions by present techniques.

• 전자공학회논문지B
• /
• 제33B권9호
• /
• pp.13-23
• /
• 1996

When artificial potential field approach is used to avoid obstacle, the problem can be occurred in case that manipulator selects the path which across over an obstacle among paths. In thiscase manipulator can't reach the desired goal form obstacle. This problem is a case of structual local minimum. so this paper proposes the method to solve structual local minimum in this case. The method is that the manipulator goes via temporary goal. This paper proposes that visual region concept to select the temporary goal. The temporary goal is selected on the border of the visual region. To prove its effectiveness, two simulation examples are done by two link manipulator in two dimension and by three link manipulator in three dimension.

• Journal of Forest and Environmental Science
• /
• 제36권2호
• /
• pp.163-172
• /
• 2020

The objective of this study was to develop evaluation criteria for forest education using the Context, Input, Process, and Product (CIPP) model. To this end, we designed a survey based on expert advice and content analysis of previous studies on the CIPP model and forest education. The survey was conducted on 393 forest education specialists, and Cronbach's α coefficient was set as 0.6 or higher to verify reliability and validity, and to determine reliability by factor. Eventually, 52 out of 57 evaluation items were extracted, and the evaluation indexes were selected through factor analysis as follows: four evaluation indexes for the context dimension, namely "Clarity of goal setting," "Developing conditions for education," "Meeting of requirements," and "Institutional drive"; three evaluation indexes for the input dimension, namely "Acquisition of education infrastructure," "Establishment of operational support," and "Adequacy of assigned manpower"; four evaluation indexes for the process dimension, which were "Adequacy of budget allocation," "Expertise of forest education instructors," "Diversity of programs," and "Public-private academic partnership"; and five evaluation indexes for the product dimension, namely "Effectiveness of perception change," "Influence over the society," "Continuity of improvement in evaluation," "Continuity of education," and "Verification of the effects of education."

• Computers and Concrete
• /
• 제2권3호
• /
• pp.239-248
• /
• 2005

The article presents the results of examination of the fractal dimension D of concrete specimen fracture surfaces obtained in fracture toughness tests. The concretes were made from three different types of coarse aggregate: gravel, dolomite and basalt aggregate. Ordinary concretes (C40) and high-performance concretes (HPC) were subjected to testing after 7, 14, 28 and 90 days of curing, respectively. In fracture toughness and compressive tests, different behaviours of concretes were found, depending on the type of aggregate and class of concrete (C40, HPC). A significant increase in the strength parameters tested occurred also after a period of 28 days (up to the $90^{th}$ day of curing) and was particularly large for concretes C40. Fractal examinations performed on fracture replicas showed that the fractal dimension D was diverse, depending on the coarse aggregate type and concrete class being, however, statistically constant after 7 and 14 days for respective concretes during curing. The fractal dimension D was the greater, the worse strength properties were possessed by the concrete. A cross-grain crack propagation occurred in that case, due to weak cohesion forces at the coarse aggregate/mortar interface. A similar effect was observed for C40 and HPC made from the same aggregate. A greater dimension D was exhibited by concretes C40, in which case the fracture was easier to form compared with high-performance concretes, where, as a result of high aggregate/mortar cohesion forces, the crack propagation was of inter-granular type, and the resulted fracture was flatter.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.710-715
• /
• 2016

Due to its simplicity and high reliability, the box-counting(BC) method is one of the most frequently used techniques to estimate the fractal dimensions of a binary image with a self-similarity property. The fractal calculation requires data sampling that determines the size of boxes to be sampled from the given image and directly affects the accuracy of the fractal dimension estimation. There are three non-overlapping regular grid methods: geometric-step method, arithmetic-step method and divisor-step method. These methods have some drawbacks when the image size M becomes large. This paper presents a BC algorithm for enhancing the accuracy of the fractal dimension estimation based on a new sampling method. Instead of using the geometric-step method, the new sampling method, called the coverage ratio-step method, selects the number of steps according to the coverage ratio. A set of experiments using well-known fractal images showed that the proposed method outperforms the existing BC method and the triangular BC method.

• 대한수학회보
• /
• 제31권1호
• /
• pp.15-23
• /
• 1994

Throughout this paper, we are working on the complex number field C. The aim of this paper is to explain the applications of Theorem 2 in .cint. 1. In the surface theory, the adjoint linear system has played important roles and many tools have been developed to understand it. In the cases of higher dimensional varieties, we don't have any useful tools so far. Theorem 2 implies that it is enough to compute the dimension of the adjoint linear system to check the birationality. We can compute, somehow, the dimension of the adjoint linear system. For example, we can get an information about $h^{0}$ (X, $O_{x}$( $K_{x}$ + D)) from Euler characteristic of vertical bar $K_{X}$ + D vertical bar and some vanishing theorems. We are going to show the applications of Theorem 2 to smooth three-folds and smooth fourfold, specially, of general type with a nef canonical divisor, smooth Fano variety, and Calabi-Yau manifold. Our main results are Theorem A and Theorem B. Most of birationality problems in Theorem A and Theorem B have been studied. (see Ando [1] and Matsuki [4] for the detail matters.) But Theorem 2 gives short and easy proofs in the cases of dimension 3 and improves the previously known results in the cases of dimension 4.4. 4.4.

• Wind and Structures
• /
• 제29권6호
• /
• pp.389-403
• /
• 2019

In this study, two original spectral representations of stationary stochastic fields, say the continuous proper orthogonal decomposition (CPOD) and the frequency-wavenumber spectral representation (FWSR), are derived from the Fourier-Stieltjes integral at first. Meanwhile, the relations between the above two representations are discussed detailedly. However, the most widely used conventional Monte Carlo schemes associated with the two representations still leave two difficulties unsolved, say the high dimension of random variables and the incompleteness of probability with respect to the generated sample functions of the stochastic fields. In view of this, a dimension-reduction model involving merely one elementary random variable with the representative points set owing assigned probabilities is proposed, realizing the refined description of probability characteristics for the stochastic fields by generating just several hundred representative samples with assigned probabilities. In addition, for the purpose of overcoming the defects of simulation efficiency and accuracy in the FWSR, an improved scheme of non-uniform wavenumber intervals is suggested. Finally, the Fast Fourier Transform (FFT) algorithm is adopted to further enhance the simulation efficiency of the horizontal stochastic wind velocity fields. Numerical examplesfully reveal the validity and superiorityof the proposed methods.

• 자연과학논문집
• /
• 제7권
• /
• pp.67-73
• /
• 1995

본 논문에서는 인간시각 시스템의 특성을 이용하여 세그멘테이션을 행하는 새로운 텍스처 세그멘테이션 영상코딩 기술을 제안한다. 제안된 방법은 영상을 HVS가 인지한 러프니스 정도에 관하여 영상을 텍스처와 같은 성질의 영역으로 세그멘테이션하는 방법론을 제안하여 상 세그멘트를 갖는 세그멘테이션 영상코딩기술의 문제점을 해결한다. 세그멘테이션은 텍스처 영역을 3 가지의 다른 텍스처 크래스(인간이 인지한 상 인테셔티, 부드러운 텍스처 및 거칠은 텍스처)로 구분하기 위해서 프락탈 디멘션을 임계하여 얻는다. 프락탈 디멘션을 근사하기 위한 적당한 브락 크기를 결정하는 것이 중요하다. 좋은 화질을 갖는 재생 영상은 여러 종류의 영상에 대해서 약 0.1에서 0.25 비트/픽셀에서 얻는다.