• 전기학회논문지
• /
• 제58권4호
• /
• pp.801-805
• /
• 2009

This paper reports on a flexible flap valve actuated by electromagnetic force under a constant pressure source. The flexible flap valve consists of the three main components: a flexible flap with a steel disk embedded in PDMS, an electromagnetic actuator and two glass plates with inlet and outlet. The flap valve is fabricated by SU-8 mold process, the EDM process and oxygen plasma treatment. The dimension of an assembled flap valve is $12[mm]{\times}20[mm]{\times}28[mm]$. The stroke volume of the flap valve is measured for various pressures. And the time of the applied input voltage is varied to change the open time of the valve. When the input voltage of 30[V] is applied for 0.25[s], the minimum stroke volume of the flap valve is $40[{\mu}L]$ at 70 [kPa].

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.76-83
• /
• 2004

Nowadays, our societies use digital technology in new architectural shape and space design to transcend three dimension limit so the boundary of the imagination world and actuality world has been collapsed. Traditional spatial value has been collapsed. Also indetermination and temporary assumption in time, fluidness and dematerialized, simultaneity and reiteration in image are relative with this circumstances. In architectural shape, media characteristics which secede from traditional characteristics of place tectonic value have occurred. Therefore, indifference and interests in shape, inter-permeation in interior and exterior space, homogeneous equivalence spatial extension have occurred. The purpose in this study examines dematerialized in contemporary space design and light materials and also investigates general and architectural background. The results of this study are as follows. First, circumstances of human have changed from physically limited boundary to unfixed, nonphysical, lightness and vague things. Second, casting off volume in shape and also dissembling exclusive and constructive Third, interior and exterior space by transparency intimates media possibility of information screen. Fourth, seek information and organic response, ambivalent transformation, accumulation of image and new mutual understanding system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1767_1768
• /
• 2009

4-step 알고리즘을 이용하여 3차원 이미지 위상 정보를 분석하였다. Carre(1966)에 의하여 제시된 위상 분석 기술은 위상이동에 대하여 설명하고 있다. Wyant(1982)에 의한 4-step 알고리즘은 수많은 PSI(Phase-Shift Interferometry)법[1] 중에서 가장 일반적인 내용이다. 그러나 실험장비 설치 시, 매우 어렵다는 단점이 있다. 실험 과정에서 물체의 3차원 형상을 얻기 위해 매우 간단히 실험 설치를 하였다. 간섭 패턴은 추가적인 렌즈, 거울, 모터와 같은 광학장비 없이 랩뷰 프로그램과 비젼 시스템을 사용하여 구축하였다. 4-step method와 컴퓨터 프로그램에 의해 생성된 unwrapping image에 의해 물체의 wrapped된 이미지를 얻었다. 실험에 의하여 얻어진 간섭패턴을 분석 함으로써, 웨이브 프론트, 강도 그래프, 3차원 형상, 상수 데이터와 같은 다양한 정보를 얻을 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1497-1502
• /
• 2013

Recently, the junctionless (JL) transistors realized by a single-type doping process have attracted attention instead of the conventional metal-oxide-semiconductor field-effect transistors (MOSFET). The JL transistor can overcome MOSFET's problems such as the thermal budget and short-channel effect. Thus, the JL transistor is considered as great alternative device for a next generation low standby power silicon system. In this paper, the JL FinFET was simulated with a three dimensional (3D) technology computer-aided design (TCAD) simulator and optimized for DC characteristics according to device dimension and doping concentration. The design variables were the fin width ($W_{fin}$), fin height ($H_{fin}$), and doping concentration ($D_{ch}$). After the optimization of DC characteristics, RF characteristics of JL FinFET were also extracted.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.792-795
• /
• 2007

To quantify irregular body motions the time series analysis was applied to the gait study. The motions obtained from gait experiment are complex to exhibit nonlinear behaviors. The purpose of this study is to measure quantitatively the characteristics of the major six joints of the body during walking. The gait experiments were carried out for eighteen young males walking on a motor driven treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The largest Lyapunov exponent was calculated from the time series to quantify stabilities of each joint. The results provides a data set of nonlinear dynamic characteristics for six joints engaged in normal walking.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1570-1575
• /
• 2007

The cold-forging process analysed in this paper deals with the cam bolt of a nonaxisymmetric shape which mainly is used as a part in the steering system of a vehicle for the purpose of adjusting shock absorb. So both strength and endurance are very important for the cam bolt. In this study, cam bolt forging process is composed of four stage processes. For three forging stages, shape of workpiece will be eccentrical. And then bolt head and washer of eccentrical shape is created in last stage. 3D finite element analysis repeatedly has been performed with changing dimension of die to obtain adequate former multi forging process and die shape. Simulation results reviewed have influence on deciding design of die and forging process. As a result, Simulation results have provided a direction to improve the process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1049-1053
• /
• 2002

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method (FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the change of the modal frequencies was examined with the variation of the tuning fork length and width. Analytical model equations were derived from the numerically relating results of the modal frequency-tuning fork length by approximating minimization. Finally the BEM was used for the sound pressure field calculation from the structural displacement data.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.923-934
• /
• 2002

The aim of this study is to suggest a Sizing System which has following points:- 1. In order to satisfy children of diverse figure shapes, we developed sizing system for three different figure type. Figure types are categorized into slim, normal, fat type based on the Rohrer Index. 2. For each figure types, we developed size chart using height bust circumference and hip circumference as basic measurements. The size codes are presented as the height-bust circumference or height-hip circumference. The size interval of height is 5cm for all figure types, such as 120,125,130 ‥‥ we developed a size allocation program, which is helpful when a customer doesn't know exact measurement of some body dimension. If a customer input measurements as much as he/she hows, the program allocates the nearest. At the end of the study, the sizing interaction sites were developed to present the results of the study clear.

• International Journal of Contents
• /
• 제9권4호
• /
• pp.92-101
• /
• 2013

Chinese auspicious element is a kind of art which is used to express yearning of a happy life. It is one of the great treasures of China, with not only emotional value of the people but also an aesthetic value. Chinese auspicious element derives from the aspiration of luck, enthusiasm of life and conciseness of eliminating malicious. It is of great cultural connotation and widely used in interior design, graphic design, fashion design and such. There are many research papers on application methodology of auspicious elements; however, there are very limited research papers on three-dimension product, let alone application in tableware. This paper focuses on illustration of Chinese representative auspicious element "auspicious fish" in tableware design. The research of its application of auspicious element's styling characteristics is of important significance in auspicious element spread and tableware design. This dissertation aims to provide referential design methodology and experience for later researches on related topic.

• 한국식생활문화학회지
• /
• 제17권4호
• /
• pp.446-455
• /
• 2002

The purpose of this study was to identify the dimensions and patterns of the perception of Korean traditional food and to find the determinants of the patterns between Korean and Yanbian housewives, taking food culture into account. Data were factor and cluster analyzed, and the results revealed two and three different dimensions and patterns for Yanbian and Korean housewives respectively. Descriptive statistics showed that perceptional patterns are likely to vary depending on cultural background of Korean traditional food. Similarities and differences in perceptional patterns between Yanbian and Korean housewives are discussed, and future implications for food as well as nutrition specialists and food marketers are provided.