• 한국철도학회논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2012

윤축 동역학 해석은 철도차량 동역학 해석의 정밀도를 결정하는 핵심 요소이다. 본 연구에서는 정밀한 3차원 차륜-레일 접촉 해석을 윤축의 강체 운동 방정식에 적용하는 방법으로 3차원 윤축 동역학 해석을 수행하였다. 곡선 주행시 플랜지 접촉에 의해 차륜-레일 2점 접촉이 발생할 때 윤축의 동역학 해석이 가능한 수치해석 절차를 개발하였다. 윤축의 구속조건식과 강체 동역학 방정식을 Runge-Kutta 방법을 이용하여 수치적분을 수행하였다. 제안된 윤축 동역학 해석 결과는 VI-RAIL을 이용한 해석결과와 비교 분석하여 타당성을 검증하였다.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.135-145
• /
• 2006

The aim of this study was to find out the differences of biomechanical factors from touching down the vaulting board to landing when techniques of 1/1Turn, stretched, and Tucked were performed on the old vaulting horse and on the new vaulting table. Three national representative men gymnasts were sampled for this study. Three dimension motion analyses by means of six Sony PD-150 video cameras with the velocity of 60 fps were used. As a result of analyzing the kinetic data from two kind of vaulting table, the following conclusions were made. 1. There was not significant differences of angular momentum between the old and the new vaulting table in all three techniques except the phase of stepping on the vaulting board and contacting the vaulting horse in the Tucked technique. IN the two phases above, the angular momentum in the new vaulting table was greater than that of the old vaulting horse. 2. There were few significant differences between the old and the new vaulting horses in the horizontal and vertical reaction force according to techniques when stepping was performed. However, it appeared tendency that the horizontal and vertical reaction force in the new vaulting table was a little greater than that of the old vaulting horse when the 1/1Turn, the Stretched and the Tucked were performed.

• Interaction and multiscale mechanics
• /
• 제3권3호
• /
• pp.213-234
• /
• 2010

A multiscale method is presented for analysis of thin slab structures in which the microstructures can not be reduced to two-dimensional plane stress models and thus three dimensional treatment of microstructures is necessary. This method is based on the classical asymptotic expansion multiscale approach but with consideration of the special geometric characteristics of the slab structures. This is achieved via a special form of multiscale asymptotic expansion of displacement field. The expanded three dimensional displacement field only exhibits in-plane periodicity and the thickness dimension is in the global scale. Consequently by employing the multiscale asymptotic expansion approach the global macroscopic structural problem and the local microscopic unit cell problem are rationally set up. It is noted that the unit cell is subjected to the in-plane periodic boundary conditions as well as the traction free conditions on the out of plane surfaces of the unit cell. The variational formulation and finite element implementation of the unit cell problem are discussed in details. Thereafter the in-plane material response is systematically characterized via homogenization analysis of the proposed special unit cell problem for different microstructures and the reasoning of the present method is justified. Moreover the present multiscale analysis procedure is illustrated through a plane stress beam example.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.583-586
• /
• 1999

In this paper, the wavelet transform is performed in the input 256$\times$256 color image and decomposes a image into low-pass and high-pass components. Since the high-pass band contains the components of three directions, edges are detected by combining three parts. After finding the position of face using the histogram of the edge component, a face region in low-pass band is cut off. Since RGB color image is sensitively affected by luminances, the image of low pass component is normalized, and a facial region is detected using face color informations. As the wavelet transform decomposes the detected face region into three layer, the dimension of input image is reduced. In this paper, we use the 3000 images of 10 persons, and KL transform is applied in order to classify face vectors effectively. FCM(Fuzzy C-Means) algorithm classifies face vectors with similar features into the same cluster. In this case, the number of cluster is equal to that of person, and the mean vector of each cluster is used as a codebook. We verify the system performance of the proposed algorithm by the experiments. The recognition rates of learning images and testing image is computed using correlation coefficient and Euclidean distance.

• 재활복지공학회논문지
• /
• 제9권4호
• /
• pp.285-291
• /
• 2015

본 논문에서는 IMU(inertial measurement unit)의 데이터를 이용하여 사람의 앉은 자세를 분류하는 알고리즘을 제안한다. 제안하는 알고리즘은 IMU의 데이터를 주성분 분석법(principle component analysis: PCA)을 이용하여 특징 벡터를 3개로 축소시켰고, RBF(radial basis function) 커널을 적용한 서포트 벡터 머신(support vector machine: SVM)을 이용하여 자세를 분류하였다. 데이터의 측정을 위하여 건강한 성인 3명을 대상으로 실험을 실시하였고, 데이터의 수집을 위하여 넥밴드 형태의 이어폰에 IMU를 내장한 장치를 개발하여 착용하였다. 피험자는 각각 neutral position, smartphoning, writing의 세 가지 앉은 자세에 대하여 실험을 진행하였다. 실험 결과 제안하는 PCA-SVM 알고리즘은 특징 벡터의 차원을 25%로 축소시키면서도 95%의 신뢰를 보였다.

• 생태와환경
• /
• 제38권spc호
• /
• pp.1-7
• /
• 2005

To resolve some of the most pressing uncertainties of Peridinium identity, morphological characteristics of Korean Peridinium were examined using light and scanning electron microscopy. The Peridinium samples were collected from three different regions of Juam, Sang-sa and Togyo Reservoirs, when seasonal blooms occurred. Formula of the epithecal plate was recorded with 7 precingular, 3 intercalary, and 4 apical plates (4', 3a, 7"). An apical pore, 3 ${\sim}$ 5 ${\mu}m$ in size, was apparently present. The cingulum was easily observed under light microscope, and was considerably offset by about 15 ${\mu}m$ (2 ${\sim}$ 3 times per cingulum width). The sulcus was straight longitudinally and widened apparently towards the antapex. None of spine was found on the surface of the thecal plates on scanning electron micrographs. The average body length was 50.4 ${\mu}m$ with a range of 29 ${\sim}$ 63 ${\mu}m$. The geometric dimension, as designated to the body length:width ratio, was found from calculation to be 1.12 with a range of 1.00 ${\sim}$ 1.35, therefore, the cell was shown slightly elongated. Based on their morphology, the causative organisms of red tides in three different Korean waters were identified as P. bipes f. occultatum, which was reported for the first time in Korea.

• Applied Microscopy
• /
• 제46권2호
• /
• pp.93-99
• /
• 2016

The thickness of specimen is an important factor in microscopic researches. Thicker specimen contains more information, but it is difficult to obtain well focused image with precise details due to optical limit of conventional microscope. Recently, a microscope unit that combines improved illumination system, which allows real time three-dimensional (3D) image and automatic z-stack merging software. In this research, we evaluated the usefulness of this unit in observing thick samples; Golgi stained nervous tissue and ground prepared bone, tooth, and non-transparent small sample; zebra fish teeth. Well focused image in thick samples was obtained by processing z-stack images with Panfocal software. A clear feature of neuronal dendrite branching pattern could be taken. 3D features were clearly observed by oblique illumination. Furthermore, 3D array and shape of zebra fish teeth was clearly distinguished. A novel combination of two channel oblique illumination and z-stack imaging process increased depth of field and optimized contrast, which has a potential to be further applied in the field of neuroscience, hard tissue biology, and analysis of small organic structures such as ear ossicles and zebra fish teeth.

• Nuclear Engineering and Technology
• /
• 제32권3호
• /
• pp.235-243
• /
• 2000

A one-dimensional neutronics formulation is established within the framework of the nonlinear analytic nodal method such that it can result in consistent one-dimensional models that produce the same axial information as their corresponding reference three-dimension81 models. Consistency is achieved by conserving axial interface currents as well as the planar reaction rates of the three-dimensional case. For current conservation, flux discontinuity is introduced in the solution of the two-node problem. The degree of discontinuity, named the current conservation factor, is determined such that the surface averaged axial current of the reference three-dimensional case can be retrieved from the two-node calculation involving the radially collapsed group constants and the discontinuity factor. The current conservation factors are derived from the analytic nodal method and various core configurations are analyzed to show that the errors in K-eff and power distributions can be reduced by a order of magnitude by the use of the current conservation factor with no significant computational overhead.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.195-202
• /
• 2011

The study interprets each of three classification models based on Bath-Tub Failure Rate (BTFR), Extreme Value Distribution (EVD) and Conjugate Bayesian Distribution (CBD). The classification model based on BTFR is analyzed by three failure patterns of decreasing, constant, or increasing which utilize systematic management strategies for reliability of time. Distribution model based on BTFR is identified using individual factors for each of three corresponding cases. First, in case of using shape parameter, the distribution based on BTFR is analyzed with a factor of component or part number. In case of using scale parameter, the distribution model based on BTFR is analyzed with a factor of time precision. Meanwhile, in case of using location parameter, the distribution model based on BTFR is analyzed with a factor of guarantee time. The classification model based on EVD is assorted into long-tailed distribution, medium-tailed distribution, and short-tailed distribution by the length of right-tail in distribution, and depended on asymptotic reliability property which signifies skewness and kurtosis of distribution curve. Furthermore, the classification model based on CBD is relied upon conjugate distribution relations between prior function, likelihood function and posterior function for dimension reduction and easy tractability under the occasion of Bayesian posterior updating.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.98-103
• /
• 2019

A more accurate method of feature point extraction and matching for three-dimensional reconstruction using low-resolution images of crops is proposed herein. This method is important in basic computer vision. In addition to three-dimensional reconstruction from exact matching, map-making and camera location information such as simultaneous localization and mapping can be calculated. The results of this study suggest applicable methods for low-resolution images that produce accurate results. This is expected to contribute to a system that measures crop growth condition.