• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1689-1694
• /
• 2009

In a previous paper, the characteristics of ECC (earth continuity conductor) have been analysed for reducing the level of induced sheath voltage considering the dimension and position of ECC, the spacing between ECC and three phase cables, and the use of two ECC conductors at the single point boned section of underground power cable system. From these results, the study conditions for optimal installation has been selected such as installation section, conductor size and etc. In this paper, 5 cases which are set by possible installation conditions are tested based on previous research results. Finally, the optimal installation method of ECC is selected on underground power cable systems.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.133-136
• /
• 2005

This paper presents a LTCC Balun-BPF, which is a BPF(bandpass filter) with a Balun in a single LTCC chip for the direct interface with a MIC chip having balanced inputs. The physical dimension of the designed Balun-BPE is $2.4{\times}2.0{\times}0.88m^3$ and the used dielectric constant ${\varepsilon}_r$ is 36. A Balun of three-lines structure with striplines and a BPF of comb-line structure was combined into the Balun-BPF. The simulated result shows 4.8dB of insertion loss, $178{\sim}179$ degree of the phase imbalance, 14dB of the return

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.3
• /
• pp.155-166
• /
• 1995

The aim of this paper was to investigate images of neighborhood parks and pergola facilities. 280 individuals responded to the 19 semantic differential pollar terms for all four parks. A 7-point semantic differential scale was used. Results from the data analysis suggest several important findings; 1. Mean scores were significantly different in most of S.D.scales according to park and pergola facilities types. As compared with park, S.D.scales values of pergola varied with its visual identity in the spatial composition of park. 2. Data from the factor analysis revealed that four dimensions appeared for all park and pergola types : "Evaluation ", "Potentiality", "Variety", and "Familiarity". 3. In terms of the "Familiarity" dimension, Omok park and its pergola were viewed a ssignificantly more familiar than any of the other three areas. 4. Parks were perceived more positive than pergolas images in the dimensions of "Evaluation ", "Variety", and "Familiarity". 5. Regression analysis showed that "Evaluation "and "Variety" dimensions were mainly related to visual preference.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1000-1002
• /
• 2003

The characteristics of eddy current sensor has been analyzed by using numerical analysis which is performed by modeling eddy current sensor and analytic object into three-dimension axis-symmetry in this paper. The eddy current sensor is modeled as cylindrical shape with variation of inside and outside diameter and frequency range between 1[kHz] and 1[MHa] for numerical analysis. The value of impendence on eddy current sensor depending on frequency variation was calculated through numerical analysis. The characteristics of eddy current sensor can be studied by normalized impendence which is gained from the calculated impendence. Therefore, sensitivity of eddy current sensor depending on frequency, inside and outside diameter can be known by investigating diameter of half circle impendence and its locus.

• Applied Microscopy
• /
• v.37 no.2
• /
• pp.143-146
• /
• 2007

The objects of the nature have three dimensional (3-D) parameters. The 3-D profiles are embedded on the photographs and microscopic images. To understand 3-D configuration, stereo pair image with thick section is frequently employed. The perception of 3-D images is possible with the aid of stereoscopic glasses, although the expert can perceive 3-D images without the glasses. Anaglyphic stereo images are constructed by various softwares from commercial and freeware. Here we would like to present an easy anaglyphs construction method with Adobe $Photoshop^{(R)}$ based on tilting paired images from high voltage electron microscope. The anaglyphic stereo images constructed revealed the same 3-D perception with conventional stereoscopy. We could zoom in/out the anaglyph image digitally to investigate the detail configuration by real time. This method is expected to contribute to understanding complex structures 3 dimensionally.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.333-342
• /
• 2003

The purpose of the study is to understand the newer and more direct design techniques, and to provide information to exert creativity in designing. The headdress, one of dress items, was selected so that the change might be investigated in designs and production methods. A headdress was manufactured on the basis of literature review and portrait analysis. The target period of the study was limited to Henry Ⅶ and Henry Ⅷl(1485∼l547) when gable headdress was put on. The details and the patterns of gable headdress were identified for the selected gable hood to be manufactured. It was not possible to get the same dress material, so a similar one was made as in the pictures. The same was done to the color. Putting the focus of the study on the reproduction of the figure in the portrait, some dimension were measured in bodily proportion and patterns were made by three-dimensional cutting. As results, some dimensions used in the manufacture had some limits.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.65-74
• /
• 2002

A three dimension(3D) link analysis is peformed considering multipath effects caused by a reflected signal and the difference angle between the antenna bore-sight and Line-Of-Sight(LOS). In addition, a direction of a receive antenna is determined for a receiver to get maximum signal strength in a telemetry situation. For a fixed receive antenna, the angle is determined to maximize the average Carrier to Noise Ratio(CNR) over the interested part of a trajectory. For a tracking antenna, the angle at every position is selected to give maximum CNR or to direct the boresight to the flying projectile.

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.197-210
• /
• 2012

This paper presents the ways that can improve the Software Cost Estimation Guidelines in order to replace those that are expected to be abolished at February, 2012, and solve the problems that are being occurred in the current Software Cost Estimation Guidelines. By using multidimensional modeling of OLAP(On-Line Analytical Processing), this paper does three dimensional modeling that considers the product/service view, process view and skill view. Also, it presents the identification method of cost estimation data through the view of each dimension. Furthermore, it defines the software cost estimation process and adapts them into the bottom up estimation and the top down estimation. Finally, it proposes the access of cost estimation data by the multidimensional analysis of OLAP.

• Journal of Information Processing Systems
• /
• v.13 no.4
• /
• pp.852-862
• /
• 2017

In this work a Discrete Cosine Transform (DCT)-based feature dimensionality reduced approach for fingerprint matching is proposed. The DCT is applied on a small region around the core point of fingerprint image. The performance of our proposed method is evaluated on a small database of Bologna University and two large databases of FVC2000. A dimensionally reduced feature vector is formed using only approximately 19%, 7%, and 6% DCT coefficients for the three databases from Bologna University and FVC2000, respectively. We compared the results of our proposed method with the discrete wavelet transform (DWT) method, the rotated wavelet filters (RWFs) method, and a combination of DWT+RWF and DWT+(HL+LH) subbands of RWF. The proposed method reduces the false acceptance rate from approximately 18% to 4% on DB1 (Database of Bologna University), approximately 29% to 16% on DB2 (FVC2000), and approximately 26% to 17% on DB3 (FVC2000) over the DWT based feature extraction method.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.106-110
• /
• 2002

4S-Van is being developed in order to provide the spatial data rapidly and accurately. 4S-Van technique is a system for spatial data construction that is heart of 4S technique. Architecture of 4S-Van system consists of hardware integration part and post-processing part. Hardware part has GPS, INS, color CCD, camera, B/W CCD camera, infrared rays camera, and laser. Software part has GPS/INS integration algorithm, coordinate conversion, lens correction, camera orientation correction, and three dimension position production. In this paper, we suggest that adequate 4S-Van design is needed according to application environment from various test results.