• 산업융합연구
• /
• 제19권4호
• /
• pp.103-109
• /
• 2021

본 연구는 북한이탈여성의 건강인지 수준에 따른 건강행동에 대한 비교를 목적으로 진행하였다. 검사 도구는 최대한 간략하면서도 연구의 목적을 수행할 수 있도록 연구자와 응답자의 포커스 그룹 인터뷰를 통해 선정하였으며, 전문가 집단에 의한 내용적 타당도를 확보하고자 하였다. 이를 바탕으로 건강인지 수준을 3단계 구분하여 집단을 구성하였으며, 건강행동은 3가지 요인으로 영양, 운동, 수면으로 구성하였다. 자료 분석은 각 건강인지 수준에 따른 건강행동을 비교하기 위해 one-way ANOVA로 분석하여 다음과 같은 결론을 얻었다. 첫째, 건강인지 중 신체적 수준에 따른 건강행동의 영양, 수면에서 유의한 차이를 나타냈으며, 운동에서는 유의한 차이를 나타내지 않았다. 둘째, 건강인지 중 심리적 수준에 따른 건강행동의 영양, 운동, 수면에서 모두 유의한 차이가 나타났다. 셋째, 건강인지 중 사회적 수준에 따른 건강행동의 영양, 수면에서 유의한 차이를 나타냈으며, 운동에서는 유의한 차이를 나타내지 않았다.

• 패션비즈니스
• /
• 제25권5호
• /
• pp.149-162
• /
• 2021

Nowadays, the cosmetic and fashion industries are paying attention to influencer marketing on Instagram. In this study, we determined whether electronic word of mouth (e-WOM) communications were affected by the following parameters: the influencer's information source, message sidedness, and consumer's regulatory focus. The experimental design of this study is a three-way mixed ANOVA, which comprises of 2 (influencer information source: expert vs general consumer) × 2 (message sidedness: two-sided message vs one-sided message) × 2 (consumer regulatory focus: promotion focus vs prevention focus) structure. The data for this research study was obtained by distributing a questionnaire to 410 subjects. The participants were aged between 20 and 39 years and lived in Seoul and Gyeonggi areas. In total, the data of 396 subjects was analyzed with the help of SPSS 25.0 statistical program: frequency analysis, reliability analysis, t-test, three-way ANOVA, and simple main effect analysis were performed. The analysis results were as follows: First, influencer information sources and consumer regulatory focus exhibited a significant interaction with consumers' e-WOM intentions. Second, message sidedness and consumer's regulatory focus exhibited a significant interaction with e-WOM intentions. Third, influencer information source and message sidedness exhibited a significant interaction with consumers' e-WOM intentions. Based on these findings, the type of influencer's information source and the consumer's regulatory focus was taken into consideration while marketing cosmetics on Instagram. Moreover, influencer marketing strategies must be used to evaluate message sidedness. This would help us gauge the consumer's attitude towards advertisements.

• Journal of Sport and Applied Science
• /
• 제7권1호
• /
• pp.21-29
• /
• 2023

Purpose: This study was to investigate the effects of isometric exercise on muscle activity and body balance ability in asymmetrical walkers. Research design, data, and methodology: Twenty gait asymmetry people were divided to unilateral exercise group (UG, n=10) and bilateral exercise group (BG, n=10). UG were performed unilateral exercise for 60 minutes, three times a week, and 16 weeks, and BG were performed one side and then the other side alternately for 60 minutes, three times a week, and 16 weeks. Muscle activity and body balance ability were measured before, after 4 and 16 weeks isometric exercise. Moreover, SI (symmetry index; SI) was calculated from the measured value of SL (step length). Statistical analyses were conducted using one-way ANOVA and two-way ANOVA with repeated measures, a paired t-test, and multiple comparisons according to Scheffe. Results: In the muscle activity, ST decreased significantly in short step length(S-SL) and BG of LS compared to before isometric exercise(p<.05), and GCM decreased significantly in BG of S-SL(p<.05). As for body balance ability, the mSEBT-A difference between L-SL and S-SL was decreased significantly in UG(p<.05). And the respective total scores of L-SL and S-SL, mSEBT-PM and mSEBT-PL were increased significantly in BG(p<.05). Conclusions: As a result, in this study above, it was confirmed that isometric exercise improved muscle activity and body balance ability in asymmetrical walkers.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.379-387
• /
• 2022

PURPOSE. The aim of this study is to compare the casts obtained by using conventional techniques and liquid crystal display (LCD) three-dimensional (3D) print techniques in the All-on-4 treatment concept of the edentulous mandibular jaw. MATERIALS AND METHODS. In this study, a completely edentulous mandibular acrylic cast (typodont) with bone-level implants placed with the Allon-4 technique served as a reference cast. In this typodont, impressions were taken with the conventional technique and dental stone casts were obtained. In addition, after scanning the acrylic cast in a dental laboratory scanner and obtaining the Standard Tessellation Language (STL) data, 3D printed casts were manufactured with a 3D printing device based on the design. The stone and 3D printed casts were scanned in the laboratory scanner and STL data were obtained, and then the interimplant distances were measured using Geomagic Control X v2020 (3D Systems, Rock Hill, SC, USA) analysis software (n = 60). The obtained data were statistically evaluated with one-way analysis of variance (ANOVA) and Tukey's pairwise comparison tests. RESULTS. As a result of the one-way ANOVA test, it was determined that the stone casts, 3D printed casts, and reference cast values in all distance intervals conformed to the normal distribution and these values had a significant difference among them in all distance intervals. In Tukey pairwise comparison test, significant differences were found between casts at all distance intervals. In all analyses, the level of significance was determined as .05. CONCLUSION. 3D printed casts obtained with a 3D LCD printing device can be an alternative to stone casts when implants are placed in edentulous jaws. [J Adv Prosthodont 2022;14:379-87]

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.561-570
• /
• 2023

This study was to evaluate the effect of different rinsing times and methods on the accuracy of temporary prostheses fabricated by 3D printing method. Sixty temporary prostheses were fabricated with LCD types of 3D printer(Halot-Sky, Creality, Shenzhen, China) and divided into six groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5 and 10 min using three methods-hand washed, ultrasonic cleaning, and automated washing. All specimens were polymerized for 3 minutes under the same conditions. The marginal and internal gaps of specimens were examined using a replica technique. The light-body silicone thickness was measured at 6 reference points(Absolute marginal discrepancy, Marginal, Chamfer, Axial, Angle, and Occlusal gap). All measurements were performed by a stereomicroscope. Reference point images were taken at 100× magnification and then measured using an image analysis program. Statistical analysis was performed using Two-way ANOVA, One-way ANOVA, and the Kruskal-Wallis test (p = .05). The marginal and internal gaps were statistically different according to the rinsing methods and rinsing times(p < .001). In the rinsing time, the temporary prosthesis rinsed for 5 minutes group showed higher accuracy than 10 minutes group. In the rinsing method, the hand washing group showed higher accuracy than the automated washing group.

• 성인간호학회지
• /
• 제19권5호
• /
• pp.138-149
• /
• 2007

Purpose: This study was to identify the level of quality of life in patients with woman cancer across treatment phases. Methods: The research method was a cross-sectional descriptive study. Data was collected by questionnaires from 226 female, who were in- and out-patients. They were diagnosed with breast and uterine cancer from three university hospitals and two general hospitals. The instruments used for this study included, "the Quality Of Life Scale(QOL)". The collected data were analyzed using Frequency, Percentage, ANOVA, Two-Way ANOVA. Results: Quality of life of women cancer patients was significantly different according to three treatment phases. Quality of life of women cancer patients was not significantly different according to areas of disease in the three treatment phases. Quality of life of women cancer patients was significantly different according to level of fatigue in the three treatment phases. Quality of life of women cancer patients was significantly different according to level of perceived health status in the three treatment phases(F=60.14, p=0.000). Quality of life of women cancer patients was significantly different according to education level(F=3.70, p=0.027) & occupation(F=5.67, p=0.018) in three treatment phases. Conclusion: Strategies for intervention are needed to improve the quality of life in women cancer patients across the treatment phases. The significant several characteristics of affecting on quality of life across treatment phases should be considered in sociopsychological nursing intervention.

• 한국가정과교육학회지
• /
• 제6권1호
• /
• pp.61-72
• /
• 1994

The purpose of this research are (1) determining the basic concepts of clothing field which are included in the middle and high school home economics education curriculum ; (2) comparing the extent of need to those three groups; (3) classifying the basic concepts into units; (4) ana-lyzing the extent of need by units and providing basic data for curriculum revision. The data collecting methods of this research is questionair and the contents of this are the same. The subjects are 1085 students, 402 teachers and 80 professors. The data was analyzed by one-way ANOVA, scheffe test and factor analysis. The results were as follows: (1) 43 basic concepts were determined. (2) While the extent of need in the teachers and professors was high, that of students was me-dium or lower than the other two groups. (3)The extent of need to 40 concepts among three groups were significantly different. (4)According to the results from the factor analysis 7 units were formed. (5)‘Accurate dressing’was the most needed thing among three groups.

• 한국의상디자인학회지
• /
• 제14권2호
• /
• pp.101-111
• /
• 2012

The purpose of this study is to evaluate the differences of visual image on variations in the length and princess line, in a silhouette of a one-piece dress with the application of the 3D Virtual Clothing System known as i-designer. Eight sample were examined: 2 variations of the length and 2 variations of the princess line, 2 variations of the form of a silhouette. The data was obtained from 66 fashion design majors. The data was assessed by a t-test and a multi-way ANOVA and factor analysis. The results were as follows; The visual image according to the design variables, four factors were selected; the attractiveness factor, the activeness factor, the practicality factor, the elegance factor. In these factors, the attractiveness factor is estimated by the most important factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the activeness factor, a significant difference was noted in the two-way interaction between the length and the princess line, the length and the silhouette. In the elegance factor, a significant difference was noted in the two-way interaction between the length and the silhouette. However, the influence on three-way interaction among the length, the princess line, and the silhouette was not significant.

• 대한치과보철학회지
• /
• 제59권3호
• /
• pp.261-270
• /
• 2021

목적: 본 연구의 목적은 (1) 기존에 존재하던 몇 가지 다른 임플란트 인상의 정확도 평가방법들과 역공학 기술을 비교하고 (2) 역공학 기술로 임플란트 식립 방향 및 임플란트 인상용 코핑의 종류에 따른 인상 채득의 정확도를 평가하는 것이다. 재료 및 방법: 임플란트 식립 방향에 따른 세 가지 다른 마스터 모델을 제작하였고, 그 중 임플란트를 평행하게 식립한 마스터 모델에서 두 임플란트 중심점 사이의 거리를 다음과 같은 세 가지 방법으로 측정하였다 (디지털 캘리퍼를 이용한 측정 방법(그룹 DC), 광학 사진을 이용한 측정 방법(그룹 OM) 및 역공학 기술을 이용한 측정 방법(그룹 RE)). 세 종류의 마스터 모델 별로 각각 세 가지 유형의 임프레션 코핑을 이용하여 인상을 채득한 후 총 90개의 실험 모델을 제작하였으며 각 실험 모델들과 마스터 모델 간의 각도 및 거리의 오차율(error rate)을 계산하였다. 세 가지 평가 방법 간의 비교에는 One-way ANOVA가 사용되었다 (P < .05). 각 실험 그룹들의 오차율은 two-way ANOVA를 이용하여 분석하였다 (P < .05). 결과: 그룹 DC의 오차율과 그룹 RE의 오차율 간에는 통계적으로 유의한 차이가 있었지만 (P < .05), 그룹 OM의 오차율을 다른 그룹들과 비교하였을 때는 통계적으로 유의한 차이가 없었다(P > .05). 역공학 기술로 측정한 오차율의 표준 편차는 디지털 캘리퍼 및 광학 사진 측정으로 계산한 오차율의 표준 편차보다 상당히 낮았다. 하이브리드 인상용 코핑 그룹은 거리 오차율에서 픽업 인상용 코핑 그룹과 큰 차이가 없었다 (P > .05). 결론: 본 실험을 통해 역공학 기술이 임플란트 인상의 삼차원적인 정확도 평가 기법으로서의 잠재력이 있음을 확인하였다.

• 생태와환경
• /
• 제39권2호통권116호
• /
• pp.209-218
• /
• 2006

두 종의 초식성 동물플랑크톤(Daphnia magna. Moina macrocopa)의 직접노출 밀도차(0, 4, 8개체)와 동물플랑크톤 배양여과액(ZCMF) 농도차(0, 25, 50%)에 따른, 두남조 Microcystis aeruginosa와 Planktothrix agardhii의 생체량과 세포내 microcystin(MC)을 1일 간격으로 측정하였고, 직접노출실험의 경우 동물플랑크톤 생존륜을 1일 간격으로 관찰하였다. 동물플랑크톤 직접노출 실험 결과, 두 균주에서 세포내 MC함량이 증가하였으며 (rm-ANOVA: P< 0.039), P. agardhii균주에서는 4개체 처리군(ZT1)보다 8개체 처리군(ZT2)에서 통계적으로 유의한 수준으로 높은 세포내 MC값이 관찰되었다(Tukey test. P<0.082).세포내 MC가 최고값을 보인 3일 또는 4일째에, 처리군들은 대조군에 비하여 통계적으로 유의한 차이를 보였다(One-way ANOVA, P< 0.021). ZCMF에 노출시킨 M. aeruginosa균주에서 세포내 MC함량이 통계적으로 유의한 수준으로 차이가 있었다(rm-ANOVA: P< 0.004), 실험기간동안 세포내 MC값은 M. aeruginosa균주에서 25%처리군 보다 50%처리군에서 통계적으로 유의한 수준으로 높게 나타났다(Tukey test, Plt; 0.025). 본연구결과, 세포내 MC량은 초식성 동물플랑크톤의 직접노출 밀도차와 분비화학물질(infochemical)농도차에 의존하여 증가 혹은 변화될수 있는 가능성이 있는 것으로 나타났으며, 부영양호에서 독성 남조 번성 조절시, 이러한 가능성을 고려하여 생물조절이 이루어져야 할 것으로 보인다.