• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.739-745
• /
• 2017

선박에서 배출되는 환경오염물질 저감 및 연료 소비를 줄이기 위한 다양한 연구가 진행되고 있다. 이에 따라 기존의 전력망과 신재생에너지를 연계 시킬 수 있는 직류배전시스템의 한 부분인 전력변환시스템에 대한 연구가 활발히 이루어지고 있다. 현재 전력변환장치로 주로 사용되고 있는 다이오드 정류기는 부하의 입력전류에 많은 저차고조파가 포함되어 공급전압의 왜곡을 초래하고 전체시스템의 전력품질을 저하시킨다. 일정하지 않은 출력 전압파형은 발전기, 부하기기 등에 오작동 유발 및 인버터 단의 스위칭 소자에 영향을 미치며 스위칭 손실을 증가 시킨다. 본 논문에서는 AFE(Active Front End) 방식 PWM(Pulse Width Modulation) 정류기의 직류출력, 입력 전원의 역률 및 총고조파왜형률(Total Harmonic Distortion)을 개선하기 위해서 PLL회로를 사용한 제어기를 설계하였고, 시뮬레이션 결과 직류 출력전압 파형과 입력전원의 역률이 기존 보다 개선되었으며 총고조파왜형률 또한 IEEE Std514-2014 규정에 적합한 결과를 얻을 수 있었다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1729-1750
• /
• 2018

Voltage source inverters (VSIs) are widely used to drive induction motors in industry applications. The quality of output waveforms depends on the switching sequences used in pulse width modulation (PWM). In this work, all existing optimal space vector pulse width modulation (SVPWM) switching strategies are studied. The performance of existing SVPWM switching strategies is optimized to realize a tradeoff between quality of output waveforms and switching losses. This study generalizes the existing optimal switching sequences for total harmonic distortions (THDs) and switching losses for different modulation indexes and reference angles with a parameter called quality factor. This factor provides a common platform in which the THDs and switching losses of different SVPWM techniques can be compared. The optimal spatial distribution of each sequence is derived on the basis of the quality factor to minimize harmonic current distortions and switching losses in a sector; the result is the minimum ripple loss SVPWM (MRSLPWM). By employing the sequences from optimized switching maps, the proposed method can simultaneously reduce THDs and switching losses. Two hybrid SVPWM techniques are proposed to reduce line current distortions and switching losses in motor drives. The proposed hybrid SVPWM strategies are MRSLPWM 30 and MRSLPWM 90. With a low-cost PIC microcontroller (PIC18F452), the proposed hybrid SVPWM techniques and the quality of output waveforms are experimentally validated on a 2 kVA VSI based on a three-phase two-level insulated gate bipolar transistor.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.457-465
• /
• 2011

본 논문에서는 3상 다이오드 정류기의 고장에 따른 해석 및 고장 판별 기법을 제안한다. 입력전원이나 다이오드소자에 고장이 발생하게 되면 출력 직류단 전압에 큰 맥동을 유발하며 이는 인버터 시스템의 제어 성능을 저하시킬 뿐만 아니라 커패시터의 수명 단축을 야기한다. 본 논문에서는 입력측의 지락 사고 및 다이오드 개방 사고 시의 직류단 전압 특성을 분석하고, 계통주파수의 6배에 주파수마다 측정된 직류단의 순시전압을 직류단 평균 전압과 비교함으로서 고장의 유무 및 종류를 판별하는 알고리즘을 제안하였다. 제안한 알고리즘은 직류단 전압 센서만을 이용하므로 구현이 간단하고 고장 진단을 위한 추가적인 하드웨어가 요구되지 않는다. 실험과 시뮬레이션을 통해 제안한 고장 진단 알고리즘의 타당성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.461-466
• /
• 2003

This paper presents the speed control of the surface-mounted permanent-magnet synchronous motors (SMPMSM) for the elevator drive. The elevator motor needs to be a compact and slim type. Essentially, the proposed scheme uses a vector control algorithm for a speed and torque control. This system is implemented using a high speed 32-bit DSP (TMS320C31-50), a high-integrated logic device FPGA (EPF10K10-Tl144-3) to design compactly and Inexpensively The proposed scheme is verified through digital simulation and experiments for a three-phase 13.3kW SMPMSM as a MRL(MachineRoomless) elevator motor ill the laboratory. Finally, experiment of the test tower was performed with a 48kW PWM converter-inverter system for a high- speed elevator .

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.23-30
• /
• 2003

본 논문에서는 계통과 원활히 동작할 수 있는 계통 연계형 태양광 발전시스템에 대한 특성을 해석하고 이론을 바탕으로 제작된 실 시스템을 적용$.$운용시 시스템의 운전특성 및 발전량을 비교 분석하였다. 그 결과로서 구조적인 문제점과 관리적인 문제점을 도출하고, 이러한 문제점에 대한 대책으로서 설치될 장소의 장기적인 일사량 측정 데이터수집을 동하여 최적의 일사량을 얻을 수 있는 지역설정과 최적의 설치형태를 설계함으로서 발전효율을 높일 수 있다. 또한, 운영시스템 및 모니터링 관리가 현행의 OS시스템으로서는 해결이 불가능한것을 전용의 OS개발과 데이터 백업 시스템을 구축함으로서 실 시스템 운용상의 문제점을 해결할 수 있었다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1336-1346
• /
• 2018

Wide band gap semiconductor devices such as SiC MOSFETs are becoming the preferred devices for high frequency and high power density converters due to their excellent performances. However, the proportion of the switching loss that accounts for the whole inverter loss is growing along with an increase of the switching frequency. In view of the third quadrant working characteristics of a SiC MOSFET, synchronous rectification discontinuous pulse-width modulation is proposed (SRDPWM) to further reduce system losses. The SRDPWM has been analyzed in detail. Based on a frequency domain mathematical model, a quantitative mathematical analysis of the harmonic characteristic is conducted by double Fourier transform. Meanwhile, a switching loss model and a conduction loss model of inverter for SRDPWM have been built. Simulation and experimental results verify the result of the harmonic analysis of the double Fourier analysis and the accuracy of the loss models. The efficiencies of the SRDPWM and the SVPWM are compared. The result indicates that the SRDPWM has fewer losses and a higher efficiency than the SVPWM under high switching frequency and light load conditions as a result of the reduced number of switching transitions. In addition, the SRDPWM is more suitable for SiC MOSFET converters.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.175-182
• /
• 2014

Tracking harmonic current quickly and precisely is one of the keys to designing active power filters (APF). In the past, the current state feedback decoupling PI control was an effective means for three-phase systems in the current control of constant voltage constant frequency inverters and high frequency PWM reversible rectifiers. This paper analyzes in detail the limitation of the conventional PI conditioner in the APF application field and presents a novel PI control method. Canceling the delay of one sampling period and the misadjustment for tracking the harmonic current is the key problem of this PI control. In this PI control, the predictive output current value is obtained by a state observer. The delay of one sampling period is remedied in this digital control system by the state observer. The predictive harmonic command current value is obtained by a repetitive predictor synchronously. The repetitive predictor can achieve better predictions of the harmonic current. By this means, the misadjustment of the conventional PI control for tracking the harmonic current is cancelled. The experiment results with a three-level NPC APF indicate that the steady-state accuracy and dynamic response of this method are satisfying when the proposed control scheme is implemented.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.165-175
• /
• 2015

Energy storage system has been widely applied in power distribution sectors as well as in renewable energy sources to ensure uninterruptible power supply. This paper presents a model predictive algorithm to control a bidirectional AC-DC converter, which is used in an energy storage system for power transferring between the three-phase AC voltage supply and energy storage devices. This model predictive control (MPC) algorithm utilizes the discrete behavior of the converter and predicts the future variables of the system by defining cost functions for all possible switching states. Subsequently, the switching state that corresponds to the minimum cost function is selected for the next sampling period for firing the switches of the AC-DC converter. The proposed model predictive control scheme of the AC-DC converter allows bidirectional power flow with instantaneous mode change capability and fast dynamic response. The performance of the MPC controlled bidirectional AC-DC converter is simulated with MATLAB/Simulink(R) and further verified with 3.0kW experimental prototypes. Both the simulation and experimental results show that, the AC-DC converter is operated with unity power factor, acceptable THD (3.3% during rectifier mode and 3.5% during inverter mode) level of AC current and very low DC voltage ripple. Moreover, an efficiency comparison is performed between the proposed MPC and conventional VOC-based PWM controller of the bidirectional AC-DC converter which ensures the effectiveness of MPC controller.