• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.361-365
• /
• 2009

This paper has been presented the transport characteristics of FinFET using the analytical potential model based on the Poisson's equation in subthreshold and threshold region. The threshold voltage is the most important factor of device design since threshold voltage decides ON/OFF of transistor. We have investigated the variations of threshold voltage and drain induced barrier lowing according to the variation of geometry such as the length, width and thickness of channel. The analytical potential model derived from the three dimensional Poisson's equation has been used since the channel electrostatics under threshold and subthreshold region is governed by the Poisson's equation. The appropriate boundary conditions for source/drain and gates has been also used to solve analytically the three dimensional Poisson's equation. Since the model is validated by comparing with the three dimensional numerical simulation, the subthreshold current is derived from this potential model. The threshold voltage is obtained from calculating the front gate bias when the drain current is $10^{-6}A$.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.1
• /
• pp.141-157
• /
• 1997

The structure and dimensionality of the User Information Satisfaction (UIS) construct is an important theoretical issue that received considerable attentions. The acceptance of UIS as a standardized instrument requires confirmation that it explains and measures the user information satisfaction construct and its component. Based on a simple of 670 respondents who participated in dealing with the Public Management Information System (PMIS), this research used a confirmatory factor analysis to test the alternavtive models of underlying factor structure and assessed the reliability and validity of these factors and items in the PMIS. The result provided a support for a revised UIS model with four first-order factors and one PMIS The result provided a support for a revised UIS model with four first-order factors and one second-order (higher-order) factor in PMIS. To cross-validata these results, the author reexamined two prior data sets. The results showed that the revised model provides better model-data fit in all three data sets.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.331-338
• /
• 2004

We present a three-dimensional average flow model considering elastic deformation of pad asperities for chemical mechanical planarization. To consider the contact deformation of pad asperities in the calculation of the flow factor, three-dimensional contact analysis of a semi-infinite solid based on the use of influence functions is conducted from computer generated three dimensional roughness data. The average Reynolds equation and the boundary condition of both force and momentum balance are used to investigate the effect of pad roughness and external pressure conditions on film thickness and wafer position angle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.311-318
• /
• 2003

The present work evaluates the effects of mixing vane shape on the flow structure and heat transfer downstream of mixing vane in a subchannel of fuel assembly. by obtaining velocity and pressure fields. turbulent intensity. flow-mixing factors. heat transfer coefficient and friction factor using three-dimensional RANS analysis. Four different shapes of mixing vane. which were designed by the authors were tested to evaluate the performances in enhancing the heat transfer. Standard k-$\varepsilon$ model is used as a turbulence closure model. and. periodic and symmetry conditions are set as boundary conditions. The flow blockage ratio is kept constant. but the twist angle of mixing vane is changed. The results with three turbulence models were compared with experimental data.

• Korean Journal of Hydrosciences
• /
• v.4
• /
• pp.33-49
• /
• 1993

The Purpose of this study is to classify existing hysteresis models and to discuss a possibility of a new type of the hysteresis model. The existing hysteresis models are classified into three types: the interpolation model, the scaling model and the domain model, of which only domain model is to simulate hysteresis curves based on the theoretical approach, It is useful to develop a hysteresis model that requires only one branch of hysteresis curves for the model calibration because obtaining hysteresis curves by experiments is expensive and time-concept by many investigators, however their models are not successful to accurately simulate real data of Rubicon Sandy Loam and Dune Sand. There is a possibility that a new model is based on the dependent domain concept considering the weighting factor, $P_a$($\theta$), which accounts for the pore blockage effect against air entry. Conclusively, a new model where the weighting factor $P_a$($\theta$) in Model III-1 (Mualem, 1984) reduces to a known variable through an appropriate method is an alternative model which required only one branch of main curves for the model calibration.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.12
• /
• pp.654-659
• /
• 2013

This paper presents a numerical optimization of louvered fins to enhance the JF factor in terms of the design parameters, including the fin pitch, the number of louvers, the louver angle, the fin thickness, and the re-direction louver length. We carried out a parametric study to select the three most important parameters affecting the JF factor, which were the fin pitch, number of louvers, and the louver angle. We optimally designed the louvered fin by using 3rd-order full factorial design, the kriging method, and a micro genetic algorithm. Consequently, the JF factor of the optimum model increased by 16% compared to that of the base model. Moreover, the optimum model reduced the pressure drop by 17% with a comparable heat transfer rate.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.147-162
• /
• 2021

The problem of predicting a ship's form factor and associated scale effects has been subject to many investigations in recent years. In this study, an attempt is made to investigate whether the form factor is influenced by a change in the ship's speed by numerically modelling a geosim series of the KCS hull form by means of a RANS solver. The turbulence dependence of the problem is also studied by altering the closure model among three widely used approaches (the k-𝜔, k-𝜔 SST, and k-𝜀 models). The results show that at very low speeds (Froude numbers in the range of 0.02-0.06) the numerical model predicts changes in the form factor of a ship between 10% and 20%, depending on the turbulence model and scale factor choices. As the speed is increased further, the form factor exhibits little change, usually in the range of 1% or less. Simulations where the Reynolds number is changed by approximately two orders of magnitude, achieved by altering the value of viscosity, confirmed that the form factor can be considered Froude-dependent only for low speeds, predicting essentially identical values when high speed cases are considered.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.170-179
• /
• 2022

Background: The vulnerability of international migrant workers is on the rise, affecting the frequency of occupational accidents at workplaces worldwide. If migrant workers are managed in the same way as native workers, the consequences on safety assurance and risk management will be significant. This study aimed to develop the vulnerability factor model for migrant workers in seafood processing industries because of significant risk-laden labor of Thailand, which could be a solution to control the risk effectively. Methods: A total of 569 migrant workers were surveyed (432 Burmese and 137 Cambodian), beginning with 40 initial vulnerability factors identified in the questionnaire established from experts. The data were analyzed through descriptive analysis; exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to ascertain the model. Results: The result of content validity >0.67 and the Cronbach's alpha of 0.957 specified the high reliability of 40 factors. The EFA indicated a total variance of 65.49%. The final CFA validated the model and had an empirical fitting; chi-square = 85.34, Adjust Goodness-of-Fit Index = 0.96, and root mean square error of approximation = 0.016. The structure concluded with three dimensions and 18 factors. Dimension 1 of the structure, "multicultural safety operation," contained 12 factors; Dimension 2, "wellbeing," contained four factors; and Dimension 3, "communication technology," contained two factors. Conclusion: The vulnerability factor structure developed in this study included three dimensions and 18 factors that were significantly empirical. The knowledge enhanced safety management in the context of vulnerability factor structure for migrant workers at the workplace.

• East Asian mathematical journal
• /
• v.9 no.2
• /
• pp.333-345
• /
• 1993

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.6
• /
• pp.823-832
• /
• 2002

A modified $textsc{k}$-$\varepsilon$model is proposed for calculation of transitional boundary-layer flows with changing pressure gradient. In order to develop the model for this problem, the flow is divided into three regions; pre-transition region, transition region and fully turbulent region. The effect of pressure gradient is taken into account in stream-wise intermittency factor, which bridges the eddy-viscosity models in the pre-transition region and the fully turbulent region. From intermittency data in various flows, Narashima＇s intermittency function, F(${\gamma}$), has been found to be proportional to $\chi$$^{n}$ according to the extent of pressure gradient. Three empirical correlations of intermittency factor being analyzed, the best one was chosen to calculate three benchmark cases of bypass transition flows with different free-stream turbulence intensity under arbitrary pressure gradient. It was found that the variations of skin friction and shape factor as well as the profiles of mean velocity in the transition region were very satisfactorily predicted.