• 제목/요약/키워드: Three dimensional data

검색결과 3,126건 처리시간 0.035초

자동차 후류에 대한 3차원 유동의 PIV 측정 (PIV Measurements of Three-Dimensional Wake Around a Road Vehicle)

  • 김진석;김성초;성재용;김정수;최종욱
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2004년도 추계학술대회 논문집
    • /
    • pp.1-4
    • /
    • 2004
  • The PIV measurements are performed to get the quantitative flow visualization around a road vehicle. The model scaled with 1/48 is located in the middle test section of the closed-loop water tunnel and the measuring system consists of CCD camera, diode laser, synchronizer, and computer. The experimental data are obtained at two Reynolds numbers of 50,000 and 100,000 based on the model length. The quasi-three-dimensional isovorticity surfaces, based on two-dimensional velocity field data, are generated. There is little difference between the results in part of the recirculation region and the vorticity contour according to the Reynolds number. Also a little bit complicated three dimensional flows are predicted behind the road vehicle.

  • PDF

THREE-DIMENSIONAL VOLUME RECONSTRUCTION BASED ON MODIFIED FRACTIONAL CAHN-HILLIARD EQUATION

  • CHOI, YONGHO;LEE, SEUNGGYU
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제23권3호
    • /
    • pp.203-210
    • /
    • 2019
  • We present the three-dimensional volume reconstruction model using the modified Cahn-Hilliard equation with a fractional Laplacian. From two-dimensional cross section images such as computed tomography, magnetic resonance imaging slice data, we suggest an algorithm to reconstruct three-dimensional volume surface. By using Laplacian operator with the fractional one, the dynamics is changed to the macroscopic limit of Levy process. We initialize between the two cross section with linear interpolation and then smooth and reconstruct the surface by solving modified Cahn-Hilliard equation. We perform various numerical experiments to compare with the previous research.

다이아몬드 그래프의 활용 방법 (Applications of Diamond Graph)

  • 홍종선;고용석
    • 응용통계연구
    • /
    • 제19권2호
    • /
    • pp.361-368
    • /
    • 2006
  • 이차원 범주형 자료를 시각적으로 표현하는 이차원과 삼차원 그래프는 많이 존재한다. 그중에서 Li등(2003)은 삼차원 그래프를 이차원 평면에 투영시키는 다이아몬드 그래프를 제안하였다. 여기서 세번째 차원은 면적과 높이 그리고 길이가 관찰값에 대응하는 다이아몬드 모양으로 대체하였다. 본 논문에 서는 이차원 자료에 대하여는 두 범주형 변수의 독립성을 검정하기 위하여 다이아몬드 그래프를 이용한다. 그리고 삼차원 이상의 자료에 대해서는 자료에 가장 적합한 로그선형모형을 설정하는데 활용할 수 있다.

Three-dimensional Map Construction of Indoor Environment Based on RGB-D SLAM Scheme

  • Huang, He;Weng, FuZhou;Hu, Bo
    • 한국측량학회지
    • /
    • 제37권2호
    • /
    • pp.45-53
    • /
    • 2019
  • RGB-D SLAM (Simultaneous Localization and Mapping) refers to the technology of using deep camera as a visual sensor for SLAM. In view of the disadvantages of high cost and indefinite scale in the construction of maps for laser sensors and traditional single and binocular cameras, a method for creating three-dimensional map of indoor environment with deep environment data combined with RGB-D SLAM scheme is studied. The method uses a mobile robot system equipped with a consumer-grade RGB-D sensor (Kinect) to acquire depth data, and then creates indoor three-dimensional point cloud maps in real time through key technologies such as positioning point generation, closed-loop detection, and map construction. The actual field experiment results show that the average error of the point cloud map created by the algorithm is 0.0045m, which ensures the stability of the construction using deep data and can accurately create real-time three-dimensional maps of indoor unknown environment.

선체(船體) 상하진동(上下振動)에 대(對)한 부가질량(附加質量)의 3차원(次元) 수정계수(修正係數)에 관(關)하여 (On the Three-dimensional Correction Factor for the Added Mass in the Vertical Vibration of the Ship.)

  • 김창열
    • 대한조선학회지
    • /
    • 제11권2호
    • /
    • pp.1-6
    • /
    • 1974
  • The three-dimensional correction factor of the added mass of finite-length elliptic cylinders in vertical vibration in a free surface was calculated. This problem has already been dealt by T. Kumai[5] to contribute to analytical prediction of the three-dimensional correction factor for the added mass in vertical vibration of ships. In Kumai's work, the body boundary condition involved in the appropriate boundary value problem was approximately treated in the course of obtaining the solution. In this work, obtaining the solution derived from mathematically exact treatment of the body boundary condition, the author recalculated the three-dimensional correction factor for length-beam ratio $4{\sim}8$, beam-draught ratio $2.00{\sim}4.50$ and number of nodes from 2 to 7. And the numerical results were compared with both Kumai's results and the author's experimental data for two and three-noded vibrations of the cylinder of beam-draught ratio 2.40 The comparison of the numerical results shows that the author's are always higher than the Kumai's as expected. And the comparison of the numerical results with experimental data shows that the Kumai's numerical results have less deviation in case of two-noded vibration, and that, in case of three-noded vibration, the author's numerical results are in fairly good correspondence.

  • PDF

전기비저항 탐사자료의 3차원 역산 (Three-dimensional Inversion of Resistivity Data)

  • 이명종;김정호;조성준;정승환;송윤호
    • 지구물리와물리탐사
    • /
    • 제2권4호
    • /
    • pp.191-201
    • /
    • 1999
  • 현재까지 전기비저항 탐사자료의 해석은 대부분 지하구조가 1차원 또는 2차원으로 가정하는데 근간을 두고 있다. 그러나, 국내와 같이 지질구조가 복잡하며 지형의 기복이 심한 경우, 이와 같은 가정을 사용은 전기비저항 탐사자료의 해석에 오류를 야기할 가능성이 높다. 본 연구에서는 3차원적으로 복잡하게 변화하는 지하구조 및 지형의 기복에 의한 지형효과를 정확히 계산할 수 있는 유한요소법에 의한 3차원 전기비저항 모델링 알고리듬을 근간으로 하는 역산 알고리듬을 개발하였다. 이 알고리듬은 ACB(Active Constraint Balancing)법을 채용함으로써 역산의 분해능 향상을 기하였다. 간단한 3차원 지하구조 및 지형기복에 대한 수치모형 실험결과 지표의 불규칙한 기복을 포함하여 역산을 수행함으로써 정확한 지하구조 영상을 획득할 수 있음을 보였으며, 국내의 교량건설 예정부지에서 수행된 격자망을 이룬 전기비저항 탐사자료에 대한 3차원 역산 결과 매우 신뢰도 높은 지하구조에 대한 영상을 도출할 수 있었다.

  • PDF

Three-Dimensional Face Point Cloud Smoothing Based on Modified Anisotropic Diffusion Method

  • Wibowo, Suryo Adhi;Kim, Sungshin
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제14권2호
    • /
    • pp.84-90
    • /
    • 2014
  • This paper presents the results of three-dimensional face point cloud smoothing based on a modified anisotropic diffusion method. The focus of this research was to obtain a 3D face point cloud with a smooth texture and number of vertices equal to the number of vertices input during the smoothing process. Different from other methods, such as using a template D face model, modified anisotropic diffusion only uses basic concepts of convolution and filtering which do not require a complex process. In this research, we used 6D point cloud face data where the first 3D point cloud contained data pertaining to noisy x-, y-, and z-coordinate information, and the other 3D point cloud contained data regarding the red, green, and blue pixel layers as an input system. We used vertex selection to modify the original anisotropic diffusion. The results show that our method has improved performance relative to the original anisotropic diffusion method.

삼차원 조도관의 압력손실 및 열전달 성능에 대한 실험적 연구 (An Experimental Study on the Pressure Drop and Heat Transfer Performance in Tubes with Three Dimensional Roughness)

  • 김내현
    • 설비공학논문집
    • /
    • 제7권2호
    • /
    • pp.276-286
    • /
    • 1995
  • In this study, pressure drop and heat transfer coefficients were measured in tubes with three dimensional roughness. Dimples were made by rotating the saw-tooth shaped finning disc on the outer tube surface. Resultant dimple shape was oval. Friction and heat transfer tests were performed with a range of roughness variables-roughness height 'e', axial roughness pitch 'p', circumferential roughness pitch 'z'. Within the test range, tube with e=0.5mm, z=5mm, p=3mm performed best. The efficiency ratio(rati of the heat transfer improvement and the pressure drop increase) of the tube approached 1.0 at low Reynolds number, and it was higher than that of the two-dimensional roughess tube of the same roughness height. Test data were predicted by 'discrete element method'. Results show that discrete element method underpredicts the friction data by 2% to 32%, and overpredicts the heat transfer data by-12% to 113%.

  • PDF

조선전용 3차원 CAD 시스템을 이용한 Pipe Offset Routing 프로그램 개발 (Pipe Offset Routing Program By Using 3D CAD For Shipbuilding)

  • 김성민;신동목
    • 대한조선학회논문집
    • /
    • 제45권4호
    • /
    • pp.432-440
    • /
    • 2008
  • Korean shipbuilders are starting to use three dimensional solid CAD systems to enhance their competitiveness in design and production. Despite many merits, three dimensional CAD systems reveal some problems in pipe-line modeling. Pipe-line modeling is heavily dependent on point data in routing. However, since the models built by sweeping or skinning operations do not have data about points and lines on the surfaces, the point data for routing are currently manually calculated by considering the diameters of the pipes and alignment conditions with other pipes. This process is inefficient and prone to errors. In order to enhance the pipe modeling, this paper presents an Offset Routing Program for a three dimensional CAD system, which aids designers to easily define the start points and to generate the pipe routings using reference objects.

화학적 기계 연마를 위한 탄성변형을 고려한 평균유동모델 (Average Flow Model with Elastic Deformation for CMP)

  • 김태완;구영필;조용주
    • Tribology and Lubricants
    • /
    • 제20권5호
    • /
    • pp.284-291
    • /
    • 2004
  • We present a three-dimensional average flow model considering elastic deformation of pad asperities for chemical mechanical planarization. To consider the contact deformation of pad asperities in the calculation of the flow factor, three-dimensional contact analysis of a semi-infinite solid based on the use of influence functions is conducted from computer generated three dimensional roughness data. The average Reynolds equation and the boundary condition of both force and momentum balance are used to investigate the effect of pad roughness and external pressure conditions on film thickness and wafer position angle.