• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제33권8호
• /
• pp.635-642
• /
• 2009

The three-dimensional turbulent wingtip vortex flows have been examined in the present study by using the commercial code FLUENT. The standard ${\kappa}-{\varepsilon}$ model is used as a closure relationship. The wing is constructed by using an elliptic body whose aspect ratio is 3.8 and the NACA 16-020 airfoil section. The simulations for various angle attack (${\alpha}=0^{\circ}$, $5^{\circ}$, and $10^{\circ}$) are carried out. The effect of Reynolds number is also investigated in this study. As the angle attack increases, the wingtip vortex becomes stronger. However, the relative vortex strength to inlet velocity decreases as Reynolds number increases.

• Korean Journal of Applied Biomechanics
• /
• 제15권4호
• /
• pp.143-151
• /
• 2005

This study was conducted to investigate the technical factors of Cuervo forward straight vaults with single twist, single and half twists, and double twists actually performed by three execellent male gymnasts participated in artistic gymnastics competition of 2003 summer Universiade in Daegu and the 85th National Sports Festival in Cheongju. To accomplish the research goals the Cuervo vaults of three gymnasts were filmed by using three digital camcorders set by 60 Hz, and data were collected through the DLT method of three dimensional cinematography. The kinematic and kinetic variables as each phasic time, CM displacement velocity, release angle inclination angle hip joint angle landing angle, average horse reaction force average moment arm average torque, whoe body's total remote local angular momentum were analyzed, so the following conclusions were reached. Generally to perform the better Cuervo vault, a gymnast should touch down on the board with the great horizontal velocity of the whole body through the fast run-up, and touch down on the horse by decreasing the horizontal displacement of the whole body during the preflight, so raise CM height gradually within a short horse contact time. He should increase the horse reaction force through checking the horizontal velocity of the whole body effectively and the inclination angular displacement of the handstand, if so he can have the large vertical velocity of the whole body. By using the acquired the velocity and the angular momentum of the whole body, he can vault himself higher and twist sufficiently, then he can get better if the body could be tilted by swinging both arms and perform the cat twist with a little flexions at hip joints. According to the above outcomes we can judge that the best athletes is LuBin, the better is YTY, and the next is JSM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제17권9호
• /
• pp.2172-2180
• /
• 1993

Under general loadings, including body forces, crack-face tractions and thermal loading, the energy release rate equation for a two-dimensional cracked body is presented. Defining the virtual crack extension as the variation of the geometry, the equation is directly derived by a shape design sensitivity of the potential energy. Although the form of the derived energy release rate equation is different from other researchers's results, the three example show that the former is exactly the same as the latter. However, the final integral equation do not involve the derivative of the displacement on the crack surface and crack tip region, thereby improving the numerical accuracy in the computation of the energy relase rate. Moreover, as it was derived from the governing equation including non-linear elasticity without special assumptions, the energy release rate of a elasto-plastic fracture can be obtained and any numerical stress analysis method can be applied.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.167-172
• /
• 2008

A microgravity survey was applied for detecting and mapping karstic cavities over limestone area at Gaeun. The gravity data were collected at about 1, 100 stations by 4 m interval. The density distribution beneath the profiles was drawn by two dimensional inversion based on the minimum support stabilizing functional, which generated better focused images of density discontinuities. We also imaged three dimensional density distribution by growing body inversion. The density image showed that the cavities were dissolved, enlarged and connected into a cavity network system.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제23권6호
• /
• pp.886-897
• /
• 1999

Fitness of clothes becomes a major concern in apparel industry. But girls had difficulties to buy ready-made clothes of good fit. To solve this problem it is necessary to classify girls' lower body Into several kinds of somatotypes and to develop dress form. The purposes of this study was to classify lower body types of middle-high school an provide the dress forms based on the analysis of their lower body types. The subjects for anthropometric measurement were 402 middle-high school girls of 13 to 15 year-old. The result of factor analysis indicated that 5 factors were extracted from anthropometric measurments through factor analysis and those factors comprise 71% of total variance. 4 clusters were categorized using 5 factor scores by cluster analysis 4 lower body dress forms for middle-high school girls were made of gypsum mould. By the analysis of more photograph three dimensional characteristics of somatotype and overlapped cross-section diagrams were analyzed.

• Journal of dental hygiene science
• /
• 제14권2호
• /
• pp.94-100
• /
• 2014

The purpose of this study was to evaluate the accuracy of digitized elastomeric impression materials of crown abutment, using non-contact white light scanner and virtual three-dimensional superimpositional analysis. The stone models and impressions were digitized white light scanner to create three-dimensional surface models. Stone models were used as CAD reference model (CRM). The resulting point clouds (ASC file) from digitization of impressions using converting software. Discrepancies between the points in the point clouds and CRM were measured by superimpositional software. Mean and standard deviation of values of discrepancies were analyzed by one-way ANOVA and multiple comparison (${\alpha}=0.05$). The mean discrepancy between the impressions for the extra-light body (XLB), light body (LB), and heavy body (HB) group were $5.10{\pm}1.45{\mu}m$, $6.30{\pm}1.87{\mu}m$, $9.80{\pm}1.52{\mu}m$, respectively. The different impression materials affected the digitization of impressions significantly (p<0.05). As a result, digitization of elastomeric impression materials on dental scanner was influenced by material sort.

• Publications of The Korean Astronomical Society
• /
• 제30권2호
• /
• pp.295-296
• /
• 2015

This study deals with the generalization of the Elliptic Restricted Three-Body Problem (ER3BP) by considering the effects of radiation and oblate spheroid primaries. This may illustrate a gas giant exoplanet orbiting its host star with eccentric orbit. In the three dimensional case, this generalization may possess two additional equilibrium points ($L_{6,7}$, out-of-plane). We determine the existence of $L_{6,7}$ in ER3BP under the effects of radiation (bigger primary) and oblateness (small primary). We analytically derive the locations of $L_{6,7}$ and assume initial approximations of (${\mu}-1$, ${\pm}\sqrt{3A_2}$), where ${\mu}$ and $A_2$ are the mass parameter and oblateness factor, respectively. The fixed locations are then determined. Our results show that the locations of $L_{6,7}$ are periodic and affected by $A_2$ and the radiation factor ($q_1$).

• Journal of the Society of Naval Architects of Korea
• /
• 제28권1호
• /
• pp.38-52
• /
• 1991

In this paper, a semi-Lagrangian method is used to solve the nonlinear hydrodynamics of a three-dimensional body beneath the free surface in the time domain. The boundary value problem is solved by using the boundary integral method. The geometries of the body and the free surface are represented by the curved panels. The surfaces are discretized into the small surface elements using a bi-cubic B-spline algorithm. The boundary values of $\phi$ and $\frac{\partial{\phi}}{\partial{n}}$ are assumed to be bilinear on the subdivided surface. The singular part proportional to $\frac{1}{R}$ are subtracted off and are integrated analytically in the calculation of the induced potential by singularities. The far field flow away from the body is represented by a dipole at the origin of the coordinate system. The Runge-Kutta 4-th order algorithm is employed in the time stepping scheme. The three-dimensional form of the integral equation and the boundary conditions for the time derivative of the potential Is derived. By using these formulas, the free surface shape and the equations of motion are calculated simultaneously. The free surface shape and fille forces acting on a body oscillating sinusoidally with large amplitude are calculated and compared with published results. Nonlinear effects on a body near the free surface are investigated.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.976-984
• /
• 2005

This paper presents the analysis results of dynamics in the billiards game within the frame­work of rigid-body mechanics and a numerical simulation program. The friction exists between the ball and the table bed as well as between the ball and the rail. There are three parts in the dynamic behavior of the ball on the table bed; motion of the ball on the table bed, collision between balls, and collision between the ball and the cushion. During the development of the simulation program, the dynamics problems such as rolling motion and three-dimensional frictional impact motion have been analyzed in detail. The theoretical issues are implemented into a viable graphic simulation program and its efficacy is demonstrated through the experi­mental validation of the billiards game. The resulting analysis results are verified quantitatively and qualitatively using high-speed video camera. Through the experimental tests, it was found that the physical parameters such as coefficients of restitution and friction vary according to the motion variables and corresponding empirical formulations were developed. The simulation and experimental results agree well.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제19권2호
• /
• pp.366-379
• /
• 1995

This study was performed to provide fundamental data on middle-aged women's upper torso by classifying the upper torso somatotype and analyzing the characteristics of their somatotype. Factor analysis of principal component model was used to 38 directly measured items, and cluster analysis was applied for classification of upper torso forms. Seven factors were extracted from the factor analysis. The first factor represented the items of circumference, breadth, and depth which were related with body size. On the basis of the cluster analysis using factor scores trom factor analysis as being independent variables, the subjects were classified into three groups. Three dress forms were constructed according to the characteristics for each somatotype of subjects, the three-dimensional characteristics of somatotype were analyzied by the moire pattern and horizontal section map of proposed dress forms. Wearing test by moire topography was used to evaluate wearing outline, the ease of clothes and garment space. Moire pattern and horizontal section map were useful to evaluate wearing conditions, and garment space was changed by the characteristics of the body shape.