• Steel and Composite Structures
• /
• 제30권2호
• /
• pp.81-96
• /
• 2019

The behavior of a new Three-Tube Buckling-Restrained Brace (TTBRB) with circumference pre-stress (${\sigma}_{{\theta},pre}$) in core tube are investigated through a verified finite element model. The TTBRB is composed of one core tube and two restraining tubes. The core tube is in the middle to provide the axial stiffness, to carry the axial load and to dissipate the earthquake energy. The two restraining tubes are at inside and outside of the core tube, respectively, to restrain the global and local buckling of the core tube. Based on the yield criteria of fringe fiber, a design method for restraining tubes is proposed. The applicability of the proposed design equations are verified by TTBRBs with different radius-thickness ratios, with different gap widths between core tube and restraining tubs, and with different levels of ${\sigma}_{{\theta},pre}$. The outer and inner tubes will restrain the deformation of the core tube in radius direction, which causes circumference stress (${\sigma}_{\theta}$) in the core tube. Together with the ${\sigma}_{{\theta},pre}$ in the core tube that is applied through interference fit of the three tubes, the yield strength of the core tube in the axial direction is improved from 160 MPa to 235 MPa. Effects of gap width between the core tube and restraining tubes, and ${\sigma}_{{\theta},pre}$ on hysteretic behavior of TTBRBs are presented. Analysis results showed that the gap width and the ${\sigma}_{{\theta},pre}$ can significantly affect the hysteretic behavior of a TTBRB.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.43-50
• /
• 2010

This study was carried out to evaluate the vertical stress properties in sandy soil according to changes of foundation condition in soil bin compacted three layers. The following conclusions and comparisons have been made based on careful analysis from theoretical and experimental methods. : When sandy soil subjected to circular uniform load, the vertical stress increments ($\Delta\sigma_z$) was increased as load increasing, the maximum values of $\Delta\sigma_z$ was achieved at the point loading axis, and $\Delta\sigma_z$ was not shown over at a distance of three times of loading plate width (B). The vertical stress increments were achieved largely at 80 % relative compaction (Rc) compared to 95 % relative compaction due to stress concentration in sandy soil. When sandy soil subjected to circular uniform load, the $\Delta\sigma_z$ differences between theoretical and experimental values as load increased were more increased and its maximum differences were achieved at stress axis. When gravel surface macadamized over sandy soil subjected to load, the $\Delta\sigma_z$ was concentrated to load axis as load increasing, so that macadamization will be decreased load transmission.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.329-334
• /
• 2015

The aim of this paper is to determine the proper heat treatment temperature for SDSS tube production without ${\sigma}$-phase precipitation. When Mother steel tube was heat treated at $800^{\circ}C$ temperature, relatively a large amount of ${\sigma}$-phase precipitated and grain refinement of ferrite phase occurred simultaneously. However, in Pilgered and Drawn steel tubes, grain refinement of the ferrite phase did not occur and a small amount of ${\sigma}$-phase precipitated. For all three types of steel tubes, the pitting potential was reduced to 2/5 or less compared with the untreated one and corrosion also occurred in the salt spray test due to the precipitation of ${\sigma}$-phase. When heat treatment temperature was $900^{\circ}C$, grain refinement of the ferrite phase occurred and very little ${\sigma}$-phase precipitated in Pilgered and Drawn steel tubes. But when heat treatment was done at $1,000^{\circ}C$ temperature, all three types of steel tubes had a similar corrosion properties of that of untreated one and also corrosion did not occur in the salt spray test, as ${\sigma}$-phase did not precipitate. Therefore, the optimum heat treatment temperature range is determined to be more than $1000^{\circ}C$ for the SDSS at which corrosion does not occur.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.105-111
• /
• 2008

Six sigma has been evolved into three generations. The first generation focused on eliminating or reducing defects as Motorola originally developed and applied. The second generation focused on reducing costs and improving process efficiency as GE extended the first generation. The next generation of six sigma such as D2MAIC(Discovery, Define, Measure, Analyze, Improve, Control) and ICRA(Innovate, Configure, Realize, Attenuate) has been discussed since the beginning of the 21st century. Although the third generation of six sigma emphasizes value creation, but there are few specific tools for its implementation. In this thesis, some tools for finding opportunities for value creation are suggested. It is explained and discussed with examples how the tools can be applied.

• 품질경영학회지
• /
• 제31권1호
• /
• pp.123-131
• /
• 2003

This paper considers a six sigma project for reducing the defects rate of the welding process in manufacturing firms. The project follows a disciplined process of five macro phases. define, measure, analyze, improve and control(DMAIC). The need of customers is used to identify critical to quality(CTQ) of project. And a process map is used to identify process input factors of CTQ. Four key process input factors are selected by using an input factor evaluation of teams; an interval of welding, an abrasion, an electric current and a moving freely. DOE is utilized for finding the optimal process conditions of the three key process input factors. Another one key input factor improved to welding machine. The six sigma level of defects rate becomes a 2.01 from a 1.61 at the beginning of the project.

• 산업공학
• /
• 제16권spc호
• /
• pp.7-13
• /
• 2003

This paper is concerned with a six sigma green belt training program. Comparative studies of existing training programs for three major companies (Samsung Electronics Company, Hyundai Motor Company, and LG Chemical Ltd.) and two consulting firms (Korean Standards Association and Korea Management Association) are made. Based on the comparative studies, a new green belt training program is proposed. The main focus of this program is on manufacturing, specially on cost and waste reductions, yield improvement, and operations with opportunity to improve capacity without major capital expenditure. The green belts take up to 4 or 5 days of intensive, highly quantitative training, roughly corresponding to the five macro phases of the six sigma methodology: define, measure, analyze, improve, and control. The six sigma tool sets for each phase are also specified.

• Bulletin of the Korean Chemical Society
• /
• 제5권2호
• /
• pp.68-73
• /
• 1984

An enhancement of through-bond interaction by bond angle distortion in pyrazine was examined using various MO methods. Results of MINDO/3 geometry optimization with an angle (${\alpha}$) at $C_2$ atom fixed to 120∼90$^{\circ}$ lead to distorted structures in which the distorted bond is brought closer toward lone pair orbital n of N atom. It was also found that the bond angle distortion increased the P character at the atom $C_2$, resulting in an increased vicinal overlap between n and the $C_2-C_3$ bond. The FMO patterns of ${\sigma}$ framework showed three-fold degeneracy, one of which was of different symmetry which mixes in the symmetry adapted pair, $n_+\;and\;n_-;\;both\;n_+\;and\;n_-$ orbitals thus can interact with both FMOs of the ${\sigma}$ framework. The LCBO-MO analysis with partial elimination of bonds, antibonds or both, however, revealed that the main interaction of $n_+$ was with the HO-${\sigma}$ and that of $n_-$ was with the LU-${\sigma}^{\ast}$ orbital of the ${\sigma}$ framework.

• 품질경영학회지
• /
• 제37권3호
• /
• pp.54-64
• /
• 2009

This study conducts an empirical analysis of how the suggestion activity, most widely used in quality control activities, interacts with the dimensions of learning organizations. The study also attempts to analyze the results of Six Sigma based on sub-dimensions of learning organizations, which are infrastructure, culture and system. In order for learning and innovation to take place in implementing a Six Sigma program, the organizational infrastructure and culture are created and sustained and then, a learning organization system would become effective. In this study, a empirical model is used to demonstrate such an association. The sample consists of 134 organizations who have implemented a Six Sigma program for more than three years. Using the version 16.0 of AMOS for structural equation modeling, the study estimates the structural equation model that has a Six Sigma organization's infrastructure, culture and system as independent constructs, the suggestion system as a mediator, and the performance of Six Sigma projects as a dependent construct.

• 품질경영학회지
• /
• 제44권2호
• /
• pp.341-356
• /
• 2016

Purpose: The purpose of this paper is to study whether the adoption of Six Sigma quality management by a firm positively affects its financial performance. The correlation between the duration of Six Sigma implementation period and the financial status of the firm is investigated as well. Methods: We conduct the analysis using data from Manufacturing Industry Productivity Panel Survey 2013 provided by Korea Productivity Center and Ministry of Trade, Industry and Energy. Propensity score matching is used to reduce sample selection bias of observational study. Furthermore, we use multiple linear regression in order to study the relationship between the implementation of Six Sigma quality management and financial performance. The return on assets and ratio of net income to net sales are considered as dependent variable and implementation of Six Sigma as independent variable. Results: The indication of this analysis is that implementation of Six Sigma quality management does not significantly enhance financial status. The firms that adopted Six Sigma quality management were categorized into three groups according to the implementation period. Comparison of each group with the firms that do not adopt Six Sigma quality management does not show statistically significant enhancement of financial status. Conclusion: In conclusion, both adoption and duration of six sigma quality management do not affect financial performance significantly.

• Corrosion Science and Technology
• /
• 제19권4호
• /
• pp.203-210
• /
• 2020

The corrosion behavior of super austenitic stainless steel was studied by examining the characteristics of the sigma phase formed in the steel. A range of experimental and analytical methods was employed, including potentiodynamic polarization tests, critical pitting temperature tests, transmission electron microscopy, and energy-dispersive spectroscopy. Three steel samples with different sigma phase levels were obtained by intentionally adjusting the manufacturing process. The results showed that the corrosion resistance of the samples was strongly dependent upon the size and distribution of the sigma phase precipitated in the samples. The larger the size of the sigma phase, the higher the Mo content in the sigma phase and the higher the depletion level of Mo at the interface between the matrix/sigma phase, the more samples with a coarse-sized sigma phase were susceptible to localized pitting corrosion at the interface. These results suggest that various manufacturing processes, such as welding and the post-heat treatment of the steel, should be optimized so that both the size and fraction of the sigma phase precipitated in the steel are small to improve the resistance to localized corrosion.