• Ocean Systems Engineering
• /
• 제13권2호
• /
• pp.147-172
• /
• 2023

This study investigates the influence of loading and inflow conditions on tidal turbine performance from a hydrodynamic and hydroacoustic point of view. A boundary element method is utilized for the former to investigate turbine performance at various loading conditions under zero/non-zero yaw inflow. The boundary element method is selected as it has been selected, tested, and validated to be computationally efficient and accurate for marine hydrodynamic problems. Once the hydrodynamic solutions are obtained, such as the time-dependent surface pressures and periodic motion of the turbine blade, they are taken as the known noise sources for the subsequence hydroacoustic analysis based on the Ffowcs Williams-Hawkings formulation given in a form proposed by Farassat. This formulation is coupled with the boundary element method to fully consider the three-dimensional shape of the turbine and the speed of sound in the acoustic analysis. For validations, a model turbine is taken from a reference paper, and the comparison between numerical predictions and experimental data reveals satisfactory agreement in hydrodynamic performance. Importantly, this study shows that the noise patterns and sound pressure levels at both the near- and far-field are affected by different loading conditions and sensitive to the inclination imposed in the incoming flow.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1175-1182
• /
• 2000

Diffraction systematically causes error in acoustic measurements. Most probes are designed to reduce this phenomenon. On the contrary, this paper proposes a spherical probe a] lowing acoustic inten sity measurements in three dimensions to be made, which creates a diffracted field that is well-defined, thanks to analytic solution of diffraction phenomena. Six microphones are distributed on the surface of the sphere along three rectangular axes. Its measurement technique is not based on finite difference approximation, as is the case for the ID probe but on the analytic solution of diffraction phenomena. In fact, the success of sound source identification depends on the inverse models used to estimate inverse diffraction phenomena, which has nonlinear properties. In this paper, we propose the concept of nonlinear inverse diffraction modeling using a neural network and the idea of 3 dimensional sound source identification with better performances. A number of computer simulations are carried out in order to demonstrate the diffraction phenomena under various angles. Simulations for the inverse modeling of diffraction phenomena have been successfully conducted in showing the superiority of the neural network.

• 한국음향학회지
• /
• 제43권4호
• /
• pp.414-421
• /
• 2024

본 논문에서는 누설에 의한 플랜트 대형사고 방지를 위한 기술로써, 다채널 음향 센서 모듈을 활용해 잔향 및 반향 영향이 큰 환경에서 배관 누설 소음을 탐지할 수 있는 시스템을 설계하고 검증한다. 정사면체 형태로 배열한 4채널 마이크로폰을 하나의 센서 모듈로 설계해, 3차원 음향 인텐시티 벡터를 측정한다. 잔향 및 반향 영향이 큰 환경에서는 센서 모듈 각각의 인텐시티 벡터 측정 오차가 평균적으로 증가하기 때문에, 다수의 센서 모듈을 현장에 배치하여 실제 음원 위치를 추정해야 한다. 따라서, 여러 쌍의 센서 모듈로부터 얻은 3차원 벡터 간 교점을 이용해 음원이 위치한 지점들을 추정해내고, 해당 지점들 중 이상치(예, 반사의 영향으로 현장 외부로 추정된 지점, 주변 구조물에 의한 회절 영향으로 평균 지점에서 먼 지점으로 추정된 지점 등)를 검출해 제외하는 알고리즘을 제안하였다. 현장의 도면상에 누설음 추정 위치 좌표를 1 s 이내에 가시화해 실시간으로 누설음이 발생한 위치를 발견해 즉각적인 대응이 가능한 시스템을 구성하고 검증한다. 본 연구는 대형 플랜트의 사고 대응 능력 향상 및 안전성 확보에도 기여할 수 있을 것으로 기대된다.

• 한국음향학회지
• /
• 제20권6호
• /
• pp.75-81
• /
• 2001

본 논문에서는 근거리 효과를 이용하여 음원의 위치를 추정하는 탐지 기법을 해양환경에 적용할 경우에 발생할 수 있는 위치추정 오차에 관하여 분석하였다. 삼각 (triangulation) 알고리듬과 파면곡률 (wavefront curvature) 알고리듬 등을 이용하는 근거리 탐지 기법은 음파가 2차원 평면 (방위, 거리)에서 전달된다고 가정한다. 그러나 해양환경은 2차원 평면이 아닌 3차원 공간 (방위, 거리, 수심)이므로 음파전달에 따른 오차가 발생할 수 있다. 3차원 공간을 가정한 경우에도 해양에서의 다중경로 음파전달을 고려하지 않았다면 역시 오차가 발생하게 될것이다. 근거리 탐지 기법의 위치추정 오차를 분석하기 위하여 다중경로 음파전달모델과 파면곡률을 이용한 초점 빔형성 (focused beamforming)기법을 이용하여 시뮬레이션하였다. 분석결과 수중음속구조, 해저면 수심, 해저면 경사와 음원의 거리 등에 따라 위치추정 오차가 달라짐을 볼 수 있었다.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.48-54
• /
• 2006

In this paper, flowfield and acoustic-field around moving bodies are simulated by the Arbitrary Lagrangian Eulerian (ALE) formulation in the finite difference lattice Boltzmann method. Some effects are checked by comparing flaw about a square cylinder in ALE formulation and that in the fixed coordinates, and both agree very well. Matching procedure between the moving grid and fixed grid is also considered. The applied method in which the both grids are connected through buffer region is shown to be superior to moving overlapped grid. Dipole-like emissions of sound wave from harmonically vibrating bodies in two- and three-dimensional cases are simulated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.224-229
• /
• 2008

With the wide use of mobile phones, a paging signal by a sound transducer acts as an environmental noise on many occasions, thus necessitating an alternative paging signal by a vibration motor. Conventional vibration motors employ three-phase windings with mechanical brushes for commutation. In this paper, a new one-phase brushless and sensorless vibration motor is introduced utilizing digital signal processor chips in cell-phones. For electromagnetic field analysis, two-dimensional modeling can be implemented to determine the back electromotive force using axisymmetric boundary conditions. Geometric design parameters, such as coil pitch and magnet pitch. are considered for performance optimization. Through the experiments, it is shown that the proposed design has the equivalent performance with reduced number of parts, thus enhancing manufacturing productivity and reducing manufacturing cost.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.26-33
• /
• 2006

A sonar dome is basically designed and installed to protect sonar array from shocks, sea wave slaps and floating matters. The acoustic wave passing through sonar dome, however, can be distorted in magnitude and phase. This paper presents a numerical method for predicting the steady-state sound pressure on the surface of transducer array in the sonar dome and typical results of sonar beam pattern affected by sonar dome. A beam tracing model with phase information and a multi-layered elastic boundary model are involved. A full three-dimensional sonar dome is modeled as a GRP acoustic window, a rubber coated steel baffle and a rubber coated steel hull. A transducer array is modeled as thick steel cylinder. There are some assumptions such as incidence of plane wave, specular reflection on boundary and directionality of transducer element.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.218-223
• /
• 2008

Cell-phone becomes a necessary communication device in modern society. However, a paging signal by a sound transducer often acts as an unpleasant noise, thus necessitating a paging signal by a vibration motor. The conventional flat type vibration motor uses three-phase windings with three phase coils. In this article, a new design of a vibration motor using a V connection with two phase coils is presented, increasing mass productivity. For electromagnetic field analysis, due to the motor symmetry, two-dimensional modeling can be implemented for fast computation, and performance is predicted by the finite element method. The winding distribution angle turns out to be the most important design parameter for the elimination of dead points, and a new coil configuration is suggested which has no adverse effect on motor size and weight. Experimental tests of vibration confirm the validity of the proposed design.

• Fisheries and Aquatic Sciences
• /
• 제11권2호
• /
• pp.113-123
• /
• 2008

We modeled fish school movements as a capture process in relation to the purse seine method using the three steps of the stimulus-response process (i.e., input stimuli, central decision-making and output reaction). Input stimuli of the model were categorized as either physical stimuli such as visual stimulus, sound stimulus, water flow, and weather or as biological stimuli such as species and size, swimming performance, sensual sensitivity, and presence of prey or predators. The output process determining the spatial orientation of the fish school for 3-D movements was based on swimming speed and angular change in the fish response, and these movements were animated as the relative geometry between the fish school and the purse seine. Simulations were carried out for skipjack tuna (Katsuwonus pelamis) schools reacting to a pelagic purse seine in the southwest Pacific Ocean. Simulation results showed that escape ratios varied from 20 to 70% by the relevant ranges in the stimulus-response thresholds, swimming speeds, and angular changes of fish schools were similar to those observed in the field. Therefore, with knowledge of relevant parameters, this model can be used to predict capture and escape probabilities of purse seine operations for different fish species or conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.263-270
• /
• 1996

본 연구에서는 여러개의 원판형 압전소자가 부착된 판구조물의 소음제어를 다루었다. 판재의 아래에는 소음원이 위치하고 이 소음원은 판재를 가진한다. 구조물 및 압전소자는 3차원 요소, 구조물 요소 및 천이요소의 조화로 이루어지는 유한요소로 모델링 되었다. 최적화 과정의 목적함수는 구조물로부터 복사되는 소음 에너지이고 설계변수는 원판형 압전소자의 위치, 크기 및 인가되는 전압이 사용되었다. 최적설계과정에서 요구되는 자동격자형성이 언급되었다. 구조물의 공진 및 비공진 주파수에서 최적설계가 행해졌으며 괄목할 만한 소음감소를 얻었다. 이 결고는 음향 하중의 형태가 다르게 변하더라도 크게 변하지 않는 것이 밝혀졌다. 또한 한 주파수 뿐 아니라 넓은 주파수 영역에서도 압전가진기의 전압을 조정함으로써 좋은감소를 얻을 수 있다.