• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.357-362
• /
• 2001

The pipe fracture tests were performed on 102mm-Sch.80 carbon steel pipe with various local wall thinning shapes, in order to understand failure behavior of thinned pipe. Pipe specimens were subjected to monotonic bending moment, using 4-points loading system, under internally pressurized condition. From the results of experiment, the failure mode, load carrying capacity, and deformability of local wall thinning pipe were investigated. Failure mode of thinned pipe depended on magnitude of internal pressure and thinning length as well as loading direction and thinning depth and angle. The variation in load carrying capacity and deformability of thinned pipe with length of thinned area was determined by stress type appled to thinning region and circumferential thinning angle. Also, the effect of internal pressure on failure behavior was dependent on failure mode of thinned pipe, and it promoted crack occurrence and mitigated local buckling at thinned area.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.81-88
• /
• 2001

This study proposed an analytical method to evaluate a local allowable wall thickness (LAWT) for locally thinned pipe subjected to internal pressure and bending moment. In this method, the stresses in the thinned region were calculated by finite element analysis and plastic collapse was applied as a failure criterion of thinned pipe. Using this method, LAWT for a simplified thinned pipe was evaluated with variation in axial extent of thinned area, and it was compared with allowable wall thickness provided by previous pipe wall thickness criteria. The results showed that the LAWT was lower, about 50%, than that calculated by construction code or ASME Code N-597, and it was higher, about 2 times, than that estimated by evaluation model based on pipe experiments. In addition, LAWT was decreased with increasing axial extent of thinned area and saturated with further increase in axial extent. And, the variation in LAWT with axial extent of thinned area depended on type of load, especially a magnitude of bending moment, considering in the evaluation.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1320-1329
• /
• 2024

When wall-thinning occurs in nuclear Class 2 and 3 pipes, reinforcement is typically applied rather than replacement. To analyze the structural integrity of reinforced wall-thinned pipe, stress analysis results using full 3-D FE analysis are not compatible to the design code equation, ASME BPVC Sec. III NC/ND-3650. Therefore, the efficient stress evaluation method for the reinforced wall-thinned pipe, compatible to the design code equation, needs to be developed. In this paper, stress evaluation methods for the reinforced wall-thinned pipe are proposed using the equivalent straight pipe concept. Furthermore, for fatigue analysis of the reinforced wall-thinned pipe, the stress intensification factor of reinforced wall-thinned pipe is presented using the structural stress method given in ASME BPVC Sec. VIII Div.2.

• 한국식품저장유통학회지
• /
• 제9권4호
• /
• pp.391-395
• /
• 2002

솎은 과실의 일반성분은 완숙과실 보다 조단백질, 조지방, 회분함량이 높았으나 탄수화물 함량은 낮았다. 무기물 함량은 Ca> Mg＞ P＞ Na＞ K＞ B 순이었다. 중금속 중 As, Cd, Cr, Hg는 검출되지 않았고 Ge, Mo, Ni, Pb 등은 극 미량이었다. 유기산은 tartaric acid, citric acid, malic acid, succinic acid 등이 검출되었으나 솎은 배는 citric acid가 검출되지 않았다. 유리당은 glucose, fructose, sucrose 등이 검출되었으나 솎은 사과는 sucrose 가 검출되지 않았다. 식이섬유 함량은 불용성 식이섬유가 수용성 식이섬유 보다 높았다. DPPH법에 의한 항산화 효과는 사과 추출액이 RC$_{50}$ 81.2~85.2 ${\mu}\ell$/mL로 가장 활성이 높았고 아질산염 소거능은 반응 pH 1.2에서 솎은 사과와 배 추출액이 각각 80%와 63%로 우수한 효과가 있었으며, tyrosinase 저해 활성은 배 추출액이 61.0~89.4%로 가장 높았다.다.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.742-749
• /
• 2003

Failure of a pipeline due to local wall thinning is getting more attention in the nuclear power plant industry. Although guidelines such as ANSI/ASME B31G and ASME Code Case N597 are still useful fer assessing the integrity of a wall thinned pipeline, there are some limitations in these guidelines. For instance, these guidelines consider only pressure loading and thus neglect bending loading. However, most Pipelines in nuclear power plants are subjected to internal pressure and bending moment due to dead-weight loads and seismic loads. Therefore, an assessment procedure for locally wall thinned pipeline subjected to combined loading is needed. In this paper, three-dimensional finite element(FE) analyses were performed to simulate full-scale pipe tests conducted for various shapes of wall thinned area under internal pressure and bending moment. Maximum moments based on true ultimate stress(${\alpha}$$\sub$u,t/) were obtained from FE results to predict the failure of the pipe. These results were compared with test results, which showed good agreement. Additional finite element analyses were performed to investigate the effect of key parameters, such as wall thinned depth, wall thinned angle and wall thinned length, on maximum moment. Also, the effect of internal pressure on maximum moment was investigated. Change of internal pressure did not show significant effect on the maximum moment.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권5호
• /
• pp.286-290
• /
• 2003

The effect of thinned fruits, apple, pear and peach, on the mycelial growth of mushrooms was investigated. The growth of mycelia with the addition of thinned fruit was clearly better than that in the control for all the tested mushrooms. The growth rate of Pleurotus ostreatus was faster than any other mushroom. The optimal concentrations of thinned apple, pear, and peach in a solid culture were 1.0%, 1.0%, and 3%, respectively, while in a liquid culture the optimal concentrations were 5,0%, 3.0%, and 5.0%, respectively. When Pleurotus ostreatus was incubated in a 20-L pilot scale fermenter with 10 L of a liquid medium containing 3% thinned fruit at 25$^{\circ}C$ and 6 vvm for 10 days, the mass-production of mycelia was 74.2 g/10 L (apple), 96.2 g/10 L (pear), and 86.3 g/10 L (peach). The mycelial yield of Pleurotus ostreatus in a medium containing thinned fruit was 2 ∼ 3 times higher than that in the control.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.237-244
• /
• 2016

This paper investigates the possibility to increase the economic value of the thinned young apple trough fermentation process. It is studies the optimal fermentation condition of thinned young apple by manipulating preparation treatment and sugar content. To do this following steps are done. Firstly, different preparation treatment for thinned young apple such as whole apple, cutting apple, and blending apple were done. The different sugar content such as $24^{\circ}Brix$, $15^{\circ}Brix$ and $4^{\circ}Brix$ was added. Secondly, the sugar contents and pH level were measured during fermentation process. Finally, statistical analysis was used to examine the relation between the preparation treatment, sugar content and pH level during the fermentation process. The experimental result shows that the different preparation treatment influences to the fermentation process. The blending apple treatment gave lower pH level compared to other kind treatments. The sugar content of thinned young apple was decrease during the fermentation process. The statistical analysis shows that the manipulation preparation treatment and sugar content affect the final pH level and whole fermentation process. Experimental result shows that the thinned young apple fermentation could be proposed as new alternative product in the market. The best fermentation process was obtained from blending thinned young apple treatment with $24^{\circ}Brix$.

• 한국환경복원기술학회지
• /
• 제11권3호
• /
• pp.20-27
• /
• 2008

This study was conducted to investigate the influence of thinning and pruning on characteristics of forest stand, mesopore ratio and soil water content at the Pinus koraiensis stands in Gwangneung, Gyeonggido. The Pinus koraiensis had been planted in 1976 and thinning and pruning were carried out in 1996. A sample area survey was conducted at experimental plots (thinned and unthinned) in 1998 and 2005, and mesopore ratio and soil water content have been monitored from 2000 to present. Average tree height of the thinned plot increased from 10.9m to 13.2m and from 10.3m to 12.8m for the unthinned plot. Average D.B.H of the thinned plot increased from 15.9cm to 21.1cm and from 14.5cm to 16.7cm for the unthinned plot during the period 1998-2005. Crown density at the thinned plot increased from 81.5% to 95.0% and from 89.5% to 95.0% for the unthinned plot during the period 1998-2005. Mesopore ratio (pF2.7) of A layer soil at the thinned plot was 40.1% while that of the unthinned plot was 37.3%. Changes of mesopore ratio at unthinned plot were not associated with stand age, but those at thinned plot had increased and then decreased, showing declining of the practice effect. Average soil water content at the thinned plot were 23.7% and 22.4% for the unthinned plot. Soil watercontents at both plots have been increased with increase in stand age. But the difference of soil watercontent at each plot has been decreased, especially at the depth of 10cm.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1351-1358
• /
• 2012

본 논문에서는 다기능 레이더에 적용 가능한 interleaved thinned 평면 배열 설계 기법을 제안하였다. 제안된 interleaved 평면 배열은 낮은 부엽 준위를 도출하기 위해 cyclic difference set(DS)이 적용된 비주기 부배열로 구성되었다. DS를 이용한 thinned 평면 부배열의 부엽 준위는 DS 파라미터에 의해 예측 가능하므로 부배열 설계에 자기상관 계수(autocorrelation coefficient)가 비슷한 DS와 complementary DS를 적용함으로써 서로 유사한 부엽 준위 특성을 구현하였다. 또한, 두 부배열의 최적 PSL(Peak Sidelobe Level)을 도출하기 위해서 interleaved 평면 배열 설계에 DS의 특성인 cyclic shift를 적용하였다. 최적화된 배열 안테나의 두 부배열은 각각 -12.47 dB와 -10.34 dB로 낮은 PSL 특성을 나타내었다.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.39-45
• /
• 2003

The failure mode of a pipe due to local wall thinning is increasingly more attention in the nuclear power plant industry. To assess the integrity of locally wall thinned pipe, it is necessary to perform many simulations under various conditions. Because the modeling for locally wall thinned elbow is more complicated than that of straight pipe the efficient modeling method for finite element analysis is necessary. In this study, the more simple efficient modeling method of three-dimensional finite element analysis for locally wall thinned elbow has been suggested and verified. And using the method, the failure mode of local wall thinned elbows that have different thinning lengths and circumferential angles is evaluated. From the results, we concluded that the collapse load of elbows has been decreased by the increase of wall thinning shape factors such as thinning lengths and circumferential angles.