반도체의 전도성은 주로 케리어에 의해서 결정된다. 전도성이 높아지려면 케리어의 수가 많고 에너지 내의 트랩 준위를 만들어서 케리어들이 낮은 에너지로도 금지대역을 넘어설수 있도록 하는 도핑기법을 주로 사용한다. 케리어들은 결정질 결합구조를 갖으며, 계면불일치에 의하여 전도성이 떨어지는 경향도 있지만 대체적으로 고농도 도핑은 이동도를 높이는 대표적인 방법에 속한다. 하지만 비정질 결합구조에서도 전도성이 높아지는 현상이 나타나며, 본 연구에서는 트래핑현상과는 다른 터널링 현상에 의한 공간전하제한 전류가 흐르면서 전도성이 향상되고 이동도가 높아지는 현상에 대하여 관찰하였다. 비정질구조에서는 케리어수가 낮고 저항이 높아지며, 커패시턴스의 on/off 특성이 향상되면서 이동도가 높아지는 것을 확인하였다. ZTO 박막은 150도에서 열처리한 경우 커패시턴스의 on/off 특성이 향상되었으며, 충전과 방전하는 실험에서는, 충전과 방전되는 형상에 있어서 시간차이가 있었으며, n형과 p형의 구분이 없었으며, 공핍층과 같은 비정질 결합구조를 보여주었다. 비정질 결합구조는 전위장벽으로 볼 수 있으며, 전위장벽은 공간전하제한전류가 흐르게 되는 원천이기도 하며, 터널링현상에 의한 전도현상이 나타나는 원인이 된다. 따라서 비정질구조에서 이동도가 증가하는 현상이 나타났으며, 케리어가 희박함에도 불구하고 전도성이 증가하는 것을 확인하였다.
To optimize the shape of the electrostatic precipitator for the removal of particulate matter in subway environments, the wind-tunnel experiments were carried out to characterize collection efficiency and ozone emission rate. As a standardized parameter, power consumption divided by the square of flow velocity, was increased, the $PM_{10}$ collection efficiency increased. If the standardized parameter is higher than 1.0 due to high power consumption or low flow velocity, increase in thickness of electrodes from 1 to 2 mm, or increase in distance of collection plates from 5 to 10 cm did not change the $PM_{10}$ collection efficiency much. Increase in thickness of high-voltage electrodes, however, can cause decrease in $PM_{10}$ collection efficiency by 28% for low power consumption and high flow velocity. The ozone emission rate decreased as distance of collection plates became wider, because the ozone emission rate per unit channel was constant, and the number of collection channels decreased as the distance of collection plates increased. When the distance of collection plates was narrow, the ozone emission rate increased with the increase of the thickness of electrodes, but the difference was negligible when the distance of collection plates was wide. It was found that the electrostatic precipitator having a thin high-voltage electrodes and a narrow distance of collection plates is advantageous. However, to increase the thickness of high-voltage electrodes, or to increase the distance of collection plates is needed, it is necessary to increase the applied voltage or reduce the flow rate to compensate reduction of the collection efficiency.
이산화탄소 배출이 없는 고분자 전해질 막 연료전지(polymer electrolyte membrane fuel cell, PEMFC)는 수송용, 발전용 시스템에 적용 가능한 친환경 에너지 변환장치이다. PEMFC의 주요 구성품 중 하나인 고분자 전해질 막(polymer electrolyte membrane, PEM)은 구동시간 동안의 높은 수소 이온 전도도와 물리화학적 안정성 갖춘 과불소화계 고분자(perfluorinated sulfonic acid, PFSA) 기반 PEM (PFSA-PEM)이 상용화 되어있다. 하지만 PFSA-PEM의 단점으로 지적되는 낮은 유리전이온도와 높은 기체 투과도의 보완이 요구되고 있다. 이에 본 총설에서는 PFSA-PEM의 성능 향상 및 단점 보완을 위해 1) PFSA의 측쇄부 길이를 조절함으로써 이온교환용량의 증가와 고분자의 결정성을 증가시켜 PFSA-PEM의 능력을 향상시킨 연구와 2) 유/무기 첨가제를 도입하여 수소 이온 전도도 및 물리적 안정성을 향상시키는 복합 막 연구 및 3) 다공성 지지체를 도입하여 PEM의 두께를 효과적으로 감소시켜 막 저항을 효과적으로 줄이고 내구성을 큰 폭으로 개선한 다공-충진막에 관한 연구를 소개하고자 한다.
The quality of meat is highly variable in many properties. This variability originates from both animal production and meat processing. At the pre-slaughter stage, animal factors such as breed, sex, age contribute to this variability. Environmental factors include feeding, rearing, transport and conditions just before slaughter (Hildrum et al., 1995). Meat can be presented in a variety of forms, each offering different opportunities for adulteration and contamination. This has imposed great pressure on the food manufacturing industry to guarantee the safety of meat. Tissue and muscle speciation of flesh foods, as well as speciation of animal derived by-products fed to all classes of domestic animals, are now perhaps the most important uncertainty which the food industry must resolve to allay consumer concern. Recently, there is a demand for rapid and low cost methods of direct quality measurements in both food and food ingredients (including high performance liquid chromatography (HPLC), thin layer chromatography (TLC), enzymatic and inmunological tests (e.g. ELISA test) and physical tests) to establish their authenticity and hence guarantee the quality of products manufactured for consumers (Holland et al., 1998). The use of Near Infrared Reflectance Spectroscopy (NIRS) for the rapid, precise and non-destructive analysis of a wide range of organic materials has been comprehensively documented (Osborne et at., 1993). Most of the established methods have involved the development of NIRS calibrations for the quantitative prediction of composition in meat (Ben-Gera and Norris, 1968; Lanza, 1983; Clark and Short, 1994). This was a rational strategy to pursue during the initial stages of its application, given the type of equipment available, the state of development of the emerging discipline of chemometrics and the overwhelming commercial interest in solving such problems (Downey, 1994). One of the advantages of NIRS technology is not only to assess chemical structures through the analysis of the molecular bonds in the near infrared spectrum, but also to build an optical model characteristic of the sample which behaves like the “finger print” of the sample. This opens the possibility of using spectra to determine complex attributes of organic structures, which are related to molecular chromophores, organoleptic scores and sensory characteristics (Hildrum et al., 1994, 1995; Park et al., 1998). In addition, the application of statistical packages like principal component or discriminant analysis provides the possibility to understand the optical properties of the sample and make a classification without the chemical information. The objectives of this present work were: (1) to examine two methods of sample presentation to the instrument (intact and minced) and (2) to explore the use of principal component analysis (PCA) and Soft Independent Modelling of class Analogy (SIMCA) to classify muscles by quality attributes. Seventy-eight (n: 78) beef muscles (m. longissimus dorsi) from Hereford breed of cattle were used. The samples were scanned in a NIRS monochromator instrument (NIR Systems 6500, Silver Spring, MD, USA) in reflectance mode (log 1/R). Both intact and minced presentation to the instrument were explored. Qualitative analysis of optical information through PCA and SIMCA analysis showed differences in muscles resulting from two different feeding systems.
연구에서는 두족류의 생식생태를 이해하기 위하여 우리나라 주요 두족류인 살오징어 Todarodes pacificus 수컷의 생식기관과 정포의 미세해부학적 구조를 기재하였다. 살오징어는 자웅이체로 외투막에 투과되는 생식기관의 색과 교접완을 통하여 암, 수를 구분할 수 있는 성적이형을 가진다. 수컷 생식기관은 정소, 1차 수정관, 정포선, 정포낭, 2차 수정관으로 구성된다. 살오징어의 수컷은 정포 형성기관인 정포선과 같은 특수화된 생식기관을 가진다. 정소는 조직학적으로 정세관형이었다. 1차 수정관은 정소의 후방부터 정포선까지 연결된 가늘고 긴 역삼각형의 용수철 형태였다. 내부에는 H-E 염색에서 호염기성으로 반응하는 정자가 가득 차 있었다. 정포선은 1차 수정관과 정포낭에 연결된 불규칙한 타원형으로 내부에는 다수의 관상선이 존재하였다. 정포낭은 정포선과 2차 수정관 사이에 위치하는 관 구조로 내강에서는 다수의 정포가 확인되었다. 2차 수정관은 정포낭의 후방부에 연결되며, 내부에 정포를 갖고 있었다. 정포는 길이 약 22 mm의 길고 투명한 관 형태로 내부에는 정자 덩어리를 갖고 있었다.
Objectives We evaluated the wound healing effects of Dangguijakyak-san (DJ) using C57BL/6 mice that were generated open wound. Methods The study was conducted with seven C57BL/6 mice assigned to each group, divided into the normal group, control group, vitamin E group, DJ low-dose group, DJ high-dose group. We measured total polyphenol, flavonoid contents, the size of the wound, liver function, pro-inflammatory cytokine activity in serum, inflammation-related proteins, adhesion molecules and chemokine proteins, collagen-related proteins in skin tissue and histopathological changes by H&E and Masson's staining. Results DJ treatment significantly reduced the area of the wound compared to the control group. Also, inflammatory cytokines were reduced and the expression of anti-inflammatory-related factors (interleukin-4 [IL-4] and IL-10) was significantly increased in the DJ treatment group. We identified that DJ treatment inhibits both pathways of inflammation, the mitogen-activated protein kinases and nuclear factor-κB pathway. Moreover, the protein expressions of Sirt1 (sirtuin 1), MCP-1 (monocyte chemoattractant protein 1), ICAM-1 (intercellular adhesion molecule 1), and VCAM-1 (vascular cell adhesion molecule 1) were decreased by DJ administration. Also, the expression of α-smooth muscle actin and collagen type I alpha 1, collagen-related proteins, that help skin recovery was significantly increased in the DJ treatment group. Histopathologically, a relatively thin epithelial layer could be observed in the DJ administration group, as well as an increase in fibroblasts and collagen fibers. Conclusions These data suggest that DJ treatment is effective in wound healing, suppressing inflammatory proteins, increasing skin repair factors and improving histopathological changes caused by wounds.
To evaluate the possibility as a multi-level memory medium for the Ge2Sb2Te5/TiN/W-doped Ge2Sb2Te5 cell structure, the crystallization rate and stabilization characteristics according to voltage (V)- and current (I)- pulse sweeping were investigated. In the cell structures prepared by a magnetron sputtering system on a p-type Si (100) substrate, the Ge2Sb2Te5 and W-doped Ge2Sb2Te5 thin films were separated by a barrier metal, TiN, and the individual thicknesses were varied, but the total thickness was fixed at 200 nm. All cell structures exhibited relatively stable multi-level states of high-middle-low resistance (HR-MR-LR), which guarantee the reliability of the multilevel phase-change random access memory (PRAM). The amorphousto-multilevel crystallization rate was evaluated from a graph of resistance (R) vs. pulse duration (T) obtained by the nanoscaled pulse sweeping at a fixed applied voltage (12 V). For all structures, the phase-change rates of HR→MR and MR→LR were estimated to be approximately t<20 ns and t<40 ns, respectively, and the states were relatively stable. We believe that the doublestack structure of an appropriate Ge-Sb-Te film separated by barrier metal (TiN) can be optimized for high-speed and stable multilevel PRAM.
Yousry B.I. Shaheen;Ghada M. Hekal;Ahmed K. Fadel;Ashraf M. Mahmoud
Structural Engineering and Mechanics
/
제90권6호
/
pp.611-633
/
2024
This study intends to investigate the response of multi-cell (MC) beams to flexural loads in which the primary reinforcement is composed of both metallic and non-metallic materials. "Multi-cell" describes beam sections with multiple longitudinal voids separated by thin webs. Seven reinforced concrete MC beams measuring 300×200×1800 mm were tested under flexural loadings until failure. Two series of beams are formed, depending on the type of main reinforcement that is being used. A control RC beam with no openings and six MC beams are found in these two series. Series one and two are reinforced with metallic and non-metallic main reinforcement, respectively, in order to maintain a constant reinforcement ratio. The first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were among the structural parameters of the beams under investigation that were documented. The primary variables that vary are the kind of reinforcing materials that are utilized, as well as the kind and quantity of mesh layers. The outcomes of this study that looked at the experimental and numerical performance of ferrocement reinforced concrete MC beams are presented in this article. Nonlinear finite element analysis (NLFEA) was performed with ANSYS-16.0 software to demonstrate the behavior of composite MC beams with holes. A parametric study is also carried out to investigate the factors, such as opening size, that can most strongly affect the mechanical behavior of the suggested model. The experimental and numerical results obtained demonstrate that the FE simulations generated an acceptable degree of experimental value estimation. It's also important to demonstrate that, when compared to the control beam, the MC beam reinforced with geogrid mesh (MCGB) decreases its strength capacity by a maximum of 73.33%. In contrast, the minimum strength reduction value of 16.71% is observed in the MC beams reinforced with carbon reinforcing bars (MCCR). The findings of the experiments on MC beams with openings demonstrate that the presence of openings has a significant impact on the behavior of the beams, as there is a decrease in both the ultimate load and maximum deflection.
목 적 : 두경부 치료 시 환자의 고정을 위해 고정용 열성형가면(Thermoplastic mask, mask)을 사용한다. 치료 중 변동의 오차가 적은 정위적방사선수술에 사용되는 특수 제작된 마스크를 토모치료에 적용 했을 때 표면선량의 변화의 경향을 알아보고 유용성을 평가해보고자 한다. 대상 및 방법 : 일반적인 마스크(conventional mask, C-mask)와 정위적방사선수술 마스크(SRS mask, S-mask)를 이용하여 인체팬텀(rando phantom)을 동일한 중심선으로 고정한 후 모의 치료를 실시하였다. 획득한 영상은 치료계획시스템(treatment planning system, TPS)을 이용하여 안와부와 침샘부위를 치료 부위로 설정하여 각 각의 토모치료계획을 세웠다. 마스크의 특성에 따른 표면선량 측정을 위해 정위적방사선수술 마스크를 기준으로 치료부위에 주변에 위치한 두꺼운 부분과 얇은 부분을 관심영역으로 설정하여 마스크의 종류에 따른 동일한 위치의 표면 선량을 비교해보았다. 그리고 토모치료기를 이용하여 모의치료와 동일한 조건으로 인체팬텀을 위치시키고 치료계획에서 설정된 관심영역의 위치에 Gafchromic EBT3 필름을 팬텀 표면에 부착 하여 마스크를 착용한 후 치료 조사하였다. 선량 농도 분석 시스템(RIT)을 이용하여 조사된 필름의 표면선량을 측정하여 마스크의 종류에 따른 표면선량 변화의 양상을 비교해보았다. 결 과 : TPS에서 마스크의 종류에 의한 표면선량 변화는 안와에서 0.65~2.53 Gy, 타액선에서 0.85~1.84 Gy의 측정 변화값을 보여주었다. Gafchromic EBT3 필름을 이용한 표면선량 측정에서는 안와에서 -0.2~+3.46 Gy, 타액선에서 1.04~3.02 Gy의 측정 변화값을 보여 주었다. Smask를 적용하였을 때 C-mask를 기준으로 하였을 때 TPS에서 최대 4.26% Gafchromic EBT3 필름에서 최대 5.82%의 각 각의 표면선량 증가 경향을 나타내었다. 결 론 : S-mask의 사용으로 인한 표면선량은 무작위적으로 변하였으나 대체적으로 유효한 범위 안에 들어옴을 알 수 있었다. 본 연구에서는 표면선량의 변화값을 극대화 하기 위해 표면에 위치한 표적을 실험 하였으며 치료 표적이 심부에 위치할 경우와 치료 계획의 조건에 따라 표면 선량은 더 감소할 것으로 생각되어지며 이는 마스크에 따른 표면선량의 차이는 피부 부작용에 영향을 미치지 않을 것으로 사료된다. 그리고 치료 중 또는 치료 간 위치변화 감소의 장점은 치료 표적이 작고 결정 장기가 밀접한 경우 S-mask의 두경부 치료 적용은 유용할 것으로 사료된다.
일라이트-스멕타이트 혼합층광물(I-S)은 속성작용과 열수변질작용에 의해 생성되는 자생광물로 온도와 칼륨이온 농도가 증가할수록 일라이트가 증가하는 I-S 상으로 전이하기 때문에 에너지 및 광물자원탐사분야에서 지온계와 연대측정계로 널리 활용되고 있다. 일반적으로 I-S 층상구조를 이루고 있는 규산염층의 개수가 한정적이기 때문에 (보통 5 ~ 15개) 팽창도라 부르는 스멕타이트 함량(%S)이 이론치보다 낮게 나타나는 특징이 있다(이를 단범위적층효과라 함). 본 연구에서는 기본입자(I-S 결정자를 물리적으로 분리하였을 때 관찰되는 최소 단위체)가 면대면(face-to-face)으로 쌓여 I-S 층상구조를 이룬다는 기본입자모델을 적용하여 적층정도에 따른 팽창도 차이로부터 단범위적층효과를 정량화하고자 하였다(${\Delta}%S=%S_{Max}-%S_{XRD}$; $%S_{Max}$ = 기본입자가 무한적층을 하였을 때 팽창도, $%S_{XRD}$ = 기본입자가 제한적층을 하였을 때 팽창도로 통상 X-선 회절분석을 이용하여 측정함). 본 연구를 위하여 금성산화산암복합체(경북 의성)에서 산출되는 11개 I-S 시료로부터 1 ${\mu}m$ 이하 입도를 분리하여 $%S_{XRD}$와 평균부합성산란두께(average coherent scattering thickness)를 측정하였으며 이 두 값을 활용하여 평균기본입자두께($N_f$)와 $%S_{Max}$를 유도하였다. 연구결과, 팽창도가 20 $%S_{XRD}$ 지점에서 단범위적층효과가 최대로 발생하는 것을 관찰할 수 있었으며 이는 대략적으로 평균 3개의 규산염층으로 구성된 기본입자($N_f{\approx}3$)가 쌓여 I-S 층상구조를 이루고 있는 경우에 해당하였다. Kang et al.(2002)의 $%S_{XRD}$와 $N_f$ 다어그램을 이용하여 각 질서도(Reichweite)에 대한 $%S_{XRD}$ 범위를 유추해본 결과, 단범위적층효과로 인하여 $%S_{XRD}$값의 범위가 적층확률(junction probability)을 통하여 유도한 이론치보다 더 낮은 쪽으로 이동하는 현상을 관찰할 수 있었다. 또한, I-S 층상구조를 구성하는 기본입자의 두께가 I-S 질서도를 결정하는 주요 인자임을 재확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.