• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.298-303
• /
• 1979

The composition of the neutral lipids in the free and bound lipids from four varieties of experimentally cultivated potatoes were identified and quantified by thin layer- and gas-liquid chromatographies. The results were summarized as follows ; 1. The neutral lipids contained in the free and bound lipids were fractionated and identified as esterified sterol, triglyceride, diglyceride, free fatty acid, and free sterol, of which triglyceride and esterified sterol were most abundant. Meanwhile, the triglyceride and esterified sterol contents in the free lipid to the total lipid quantity were 10 and 2.7 % respectively, approximately 3 times higher than the 3.0 and 0.8 % contained in the bound lipid. 2. The fatty acid composition of the neutral lipids in the free and bound lipids was the same as that of the total free and bound lipids. The only difference was that content of saturated fatty acid was lower rate in the neutral lipid of the free lipid than in the total free lipid, whereas the unsaturated fatty acid was more abundant in the neutral lipid of the free lipid. Fatty acid composition of individual neutral lipid was of almost the same pattern as that of the total neutral lipid.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.179-181
• /
• 1984

The present study was directed to define the triglyceride composition of pine nut oil. The triglycerides were separated from pine nut oil by thin layer chromatography, and fractionated by high performance liquid chromatography on the basis of partition numbers. Each of these collected fractions were fractionated again by gas liquid chromatography (GLC) according to the acyl carbon number of the triglyceride, and fatty acid composition of the triglyceride was also analyzed by GLC. The pine nut oil consisted of thirty two kinds of triglycerides, and the major triglycerides of pine nut oil were those of $(C_{18:2},\;C_{18:2},\;C_{18:3}\;;\;34.9%)$, $(C_{18:1},\;C_{18:2},\;C_{18:3}\;;\;10.8%)$, $(C_{18:1},\;C_{18:1},\;C_{18:2}\;;\;9.9%)$, $(C_{18:1},\;C_{18:1},\;C_{18:1}\;;\;6.5%)$, $(C_{18:1},\;C_{18:1},\;C_{18:2}\;;\;6.3%)$, $(C_{18:1},\;C_{18:1},\;C_{18:3}\;;\;4.8%)$, $(C_{16:0},\;C_{18:2},\;C_{18:3}\;;\;3.3%)$, $(C_{18:0},\;C_{18:1},\;C_{18:2}\;;\;2.7%)$, $(C_{16:0},\;C_{18:1},\;C_{18:2}\;;\;2.6%)$, $(C_{16:0},\;C_{18:2},\;C_{18:2}\;;\;2.2%)$, $(C_{16:0},\;C_{18:1},\;C_{18:3}\;;\;1.9%)$, $(C_{16:0},\;C_{18:2},\;C_{18:2}\;;\;1.7%)$, $(C_{16:0},\;C_{18:1},\;C_{18:1}\;;\;1.7%)$, $(C_{18:1},\;C_{18:3},\;C_{18:3}\;;\;1.5%)$.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.42-48
• /
• 2006

Bacillus subtilis KMU-13 was isolated from the Lillehammer forest soils at Norway and shown a strong antifungal activity on cucumber scab, Cladosporium cucumerinum KACC 40576. B. subtilis KMU-13 produced a maximum level of antifungal substance under incubation aerobically at $30^{\circ}C$, 180 rpm for 48 hours in LB broth containing 0.5% maltose and 0.5% bactopeptone and initial pH adjusted to 6.0. Butanol extract of cultured broth was confirmed inhibitory zone by plate assay and Rf 0.64 value substance by thin layer chromatography (TLC) represented high antifungal activity against C. cucumerinum KACC 40576 and also shown fungal growth inhibitory activity against Botytis cinerea KACC 40573, C. gloeosporioides KACC 40804, D. byoniae KACC 40669, F. oxysporum KACC 40037, F. oxysporum KACC 40052, F. oxysporum f. sp. radicis-lycopersici KACC 40537, F. oxysporum KACC 40902, M. cannonballus KACC 40940, P. cambivora KACC 40160, R. soiani AG-1 KACC 40101, R. solani AG-4 KACC 40142, and S. scleotiorum KACC by agar diffusion method.

• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.454-463
• /
• 2009

In this study, from January 2006 to February 2009, we observed 107 ice spikes formed in a natural state, and analyzed their environment. We developed an experimental device to reproduce ice spikes in laboratory and successfully made 531 ice spikes. We analyzed the process of the formation and the principle of how those ice spikes grow through videotaped data of the formation in the experiment. In the natural world, when the surface of water and the lower part of a vessel begin to freeze, a vent (breathing hole) develops at the surface where an ice is not frozen; this vent serves as the seed of an ice spike. It is assumed that the volume expansion of ice in the vessel which occurs when water freezes makes the supercooled water go upward through the vent and becomes an ice bar called an ice spike. In the laboratory, however, when distilled water is poured into an ice tray cube and kept in the experimental device for about one and a half hours at a temperature of -12- $-13^{\circ}C$, a thin layer of ice then begins to develop on the surface of the water, the vent is formed, and ice spikes form for about 10-30 minutes. These spikes stop growing when the end becomes clogged. Ice spikes can be described as falling into seven categories of shape, with the apex type topping the list followed by the slant type in the natural state and the vertical type predominating in the laboratory.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.124-134
• /
• 2006

Statement of problem: Streptococcus produces energy and forms extracellular polysaccharides by metabolizing sucrose. Insoluble glucan, a kind of extracellular polysaccharide, is the important material of dental plaque. Fructose affects the metabolism of sucrose. Purpose: The purpose of this study was to evaluate the effect of fructose on the metabolism of sucrose in Streptococcus mutans. Materials and methods: To determine the effect of fructose on the formation of artificial plaque by Streptococcus mutans Ingbritt, S. mutans and fructose were placed in beakers containing M17 broth and sucrose. The wires were hung on frameworks inserted into cork stoppers, and then immersed in each of the beakers. After the incubation with gentle shaking, each wire was weighed. To analyze the effect of fructose on the sucrose metabolism by S. mutans or glucosyltransferase, S. mutans and fructose were placed in M17 broth containing sucrose. After the incubation. the remaining sucrose and polymers were analysed by thin layer chromatography. Results: The following results were obtained; 1. When Streptococcus mutans was cultured in the media containing 3% sucrose for 8 hours, the mean weight of formed artificial plaque on the wires was $124.3{\pm}3.0mg$, whereas being reduced to $20.7{\pm}10.2mg$ in the media added with 3% sucrose and 4% fructose(p<0.05) 2. When the control containing glucose was added with sucrose, the optical density of Streptococcus mutans solution cultured for 24 hours was not increased compared with the control, while being increased by adding with fructose. 3. When Streptococcus mutans was incubated in the media added with sucrose and fructose for 8 hours, the number of viable cells was increased compared with the media added with sucrose. 4. The amount of remained sucrose was increased in Streptococcus mutans culture supernatant of media added with sucrose and fructose than with sucrose only. but the amount of produced insoluble glucan was decreased. 5. The amounts of remained sucrose and produced soluble glucan were increased in the culture of glucosyltransferase-contained media added with sucrose and fructose than with sucrose only, but the amount of produced insoluble glucan was decreased . Conclusion: These results indicated that the sucrose metabolism and the production of insoluble glucan were inhibited in Streptococcus mutans by adding fructose in the media containing sucrose.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7794-7800
• /
• 2015

Ginsenosides in ginseng berry has been known as functional materials showing physiological effect to the human. Specially, ginseng berry contains plenty of ginsenoside Re, but the study of extraction processes were not enough performed. Accordingly, the purpose of this study was to establish the optimized extraction process for obtaining ginsenoside Re from ginseng berry. The extraction process of ginsenosides was performed in 250 mL extraction flask containing 150 solvent and 10 g of dried ginseng berry. The extracted ginsenoside Re, Rg1 and Rd and total crude ginsenosides from ginseng berry were evaluated by TLC according to the treated conditions (the ratio of alcohol to water, extraction temperature, extraction period, and extraction times). Optimized conditions for extraction was 70% to 30% of the ratio of alcohol to water, $80^{\circ}C$ of extraction temperature, 4 h of extraction period, and 2 times of extraction frequency. The amount of total crude ginsenosides of the extract obtained from the optimized process was 88.6 mg/g based on dried ginseng berry. The composition of ginsenosides from the extracted was 5.5% of Rb1, 5.2% of Rc, 14.3% of Rd, 51.5% of Re, 8.1% of Rf, and 15.7% of Rg1. A protopanaxtriol ginsenosides of whole ginsenosides extracted was about 80%.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.63-73
• /
• 1968

It is well known that mammalian alveolar membrane is covered with a very thin layer of surfactant film which characteristically reduces surface tension of alveolar membrane, and maintains alveolar stability. Since Clements in 1957 demonstrated that the surfactant is extractable by mincing the lung tissue in saline, various studies on the subject have been succeeded by many workers. However, the effect of radiation on the surfactant is not well clarified. Present study was attempted to observe the effect of x-irradiation on the activity of surfactant in rabbits. X-ray in dose of 300 r, 600 r or 900 r was irradiated to the chest of rabbits. The lung was removed from normal or irradiated rabbits sacrificed by arterial blood shedding, and lung-saline extract, adding 3 grams of lung tissue to 50 mili-liters of saline, was prepared by means of Vertis homogenizer. Tension-area diagram of lung extract was recorded automatically by a modified Langmuir-Wilhelmy balance with a synchronized recording system designed in this department. The surface tension of lung extract was measured at 1st, 2 nd, 3 rd, 7 th and 15 th post-radiation day in 300 r irradiated group, at 3 rd, 7 th and 15 th post-radiation day in 600 r irradiated group, 3 rd and 7 th post-radiation day in 900 r irradiated group respectively. For the histo-pathological study, lung tissue preparations were made in all irradiatiated groups on the day of experiment and in normal group. The results obtained are summarized as follows: 1. The minimal surface tension, maximal surface tension and stability index of normal rabbits lung extracts were 7.68 dynes/cm, 38.84 dynes/cm, and 1.39 respectively. 2. The activity of surfactant was depressed prominently by x-irradiation. However, increase in the dose of x-irradiation did not show any significant change in the degree of surfactant activity suppression. The most marked depression in surfactant was observed at the third post-radiation day in all irradiated groups. 3. Activity of surfactant depressed by x-irradiation showed a tendency of recovering to normal on 15 th post-radiation day. 4. The tendency of change in activity of surfactant following x-irradiation was somewhat correlative with histo-pathological changes. But the degree of depression of surfactant by x-irradiation did not correspond to the degree of histo-pathological changes, and recovery of lung tissue from radiation damage, tissue edema and congestion, seemed to be followed by restoration of surfactant activity. 5. The width of the tension-area diagram was measured at the surface area of 40% in lung extract of normal and x-irradiated rabbits. And it was found that the changes of the width corresponded well with that of minimum surface tension and of stability index in all normal and x-irradiated groups.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.403-410
• /
• 2012

The brine treatment applied during the fabrication of forged high tin bronze objects is considered effective at the removal of surface oxide layers developed at elevated temperatures. There is not much information, however, available for the understanding of its exact effect and purpose. This work performed laboratory experiments to characterize the effect brine treatments produce on the surface of bronze objects during fabrication. Specimens were first made in the bronze shop of the Yongin folk village under varying conditions of brine treatments, and the results obtained were then used in the following laboratory experiments where the effect of brine treatments were investigated in terms of brine concentrations, alloy compositions and thermo-mechanical treatments. The results show that oxide layers generated at high temperature are easily removed by the brine treatment. It was found that the element, chlorine, played a key role in the removal of such oxide layers as opposed to the other constituent of the brine, sodium, makes no notable contribution. In bronze alloys containing 22% tin, this brine effect is obtained regardless of the application of forging as long as the brine concentration is over 0.5% based on weight. In alloys containing lead, however, no brine effect is observed due to the molten lead that emerges from inside the hot bronze specimen and forms a thin layer on its surface.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.137-150
• /
• 2002

Recently, plane failure mode occurred frequently along the bedding plane having low angle dip about 20 degree when cutting slopes were constructed in sedimentary rock region of the Gyeongsang Basin. Landslide of the Whangryeong Mountain which was occurred at Busan Metropolitan City in 1999 belongs to the category mentioned above. Reconstruction for cutting slope of the Whangryeong Mountain has finished in 2000 and final grade of reconstructed cutting slope is 1:2.0. To analyze slope failure mode for landslide of the Whangryeong Mountain, various analyses were performed such as in-situ investigation and test, drilling, laboratory test, aerial photograph interpretation, X-ray diffraction analysis, and slope stability analysis using Stereographic Projection and Limit Equilibrium methods. As the result, it is identified that tension cracks had been developed one year before the landslide took place. The tension crack semis to be formed by merging several joint sets. It appears that failure blocks broke down along the sliding planes of different layers. Risk of plane failure is conformed as a result of stability analysis using Stereographic Projection and Limit Equilibrium methods in case that greenish gray tuffaceous shales, regared as sliding planes, are weathered. From now on, a detailed investigation is needed for the thin layers which is sensitive to weathering, and stability analysis for this layer is performed at cut slope construction site having similar geological condition.