• Journal of Magnetics
• /
• 제11권3호
• /
• pp.108-110
• /
• 2006

We successfully enhanced the performance of a spin valve by inserting an ultra-thin layer of partially oxidized Fe in the pinned and free layers. With the exchange bias field kept large, the spin valve reached a GMR of 12%, which corresponded to a 55% increase in GMR when we compared it with that of spin valves without any inserted layer. The layer of partially oxidized Fe was more effective for improving the properties of the spin valve than the layer of partially oxidized $Co_{90}Fe_{10}$. Considering all the results, we can contribute the significant improvement to the combined effect of the modified local electronic structures at the Fe impurities and theenhanced spin-dependent reflections at the $\alpha-Fe_{2}O_{3} phase in the magnetic layer.

• 한국자기학회지
• /
• 제3권4호
• /
• pp.320-324
• /
• 1993

스퍼터된 자기기록매체 Co-10at%Cr-2at%Mo/Cr 자성박막의 제조조건이 미세구조와 자기적특성에 미치는 영향을 조사하였다. 기판의 온도는 상온-$250^{\circ}C$로 하였으며 Cr하지층과 CoCrMo층의 두께는 각각 $1000-2500\AA$, $300-800\AA$이었다. CoCrMo층의 두께가 $500{\AA}-800{\AA}$ 증가함에 따라 결정립은 미세화 되었으며 균일한 조직을 나타냈다. 보자력은 기판의 온도, CoCrMo자성층, Cr하지층의 두께 를 증가시켰을때 향상되었다. 기판온도가 $250^{\circ}C$, 자성층의 두께가 $700\AA$, Cr 하지층의 두께가 $1000\AA$일때 880 Oe의 보자력을 나타냈다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3319-3321
• /
• 1999

Pt-RTD and Micro Heater was fabricated by using MgO as medium layer in order to improve adhesion of Pt thin-films to $SiO_2$ layer, MgO layer improved adhesion of Pt thin-films to $SiO_2$ layer without any chemical reactions to Pt thin-films under high annealing temperatures, In the analysis of properties of Pt-RTD, TCR value had 3927 $ppm/^{\circ}C$ and liner in the temperature range of $25-400^{\circ}C$. The temperature of Pt micro-heater had up to $400^{\circ}C$ with 1.5watts of the heating power. In investigating output characteristics of flow sensors output voltages increased as gas flow rate and its conductivity increased due to increase of heat-loss from sensor to external. Output voltage was 82 mV at $N_2$ flow rate of 2000sccm, heating power of 1.2W.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.186-189
• /
• 2003

The MFIS capacitors were fabricated using a metalorganic decomposition method. Thin layers of $ZrO_2$ and $CeO_2$ were deposited as a buffer layer on Si substrate and BLT thin films were used as a ferroelectric layer. The electrical and structural properties of the MFIS structure were investigated. X -ray diffraction was used to determine the phase of the BLT thin films and the quality of the $ZrO_2$ and $CeO_2$ layer. AES show no interdiffusion and the formation of amorphous $SiO_2$ layer is suppressed by using the $ZrO_2$ and $CeO_2$ film as buffer layer between the BLT film and Si substrate. The width of the memory window in the C-V curves for the $BLT/ZrO_2/Si$ and $BLT/CeO_2/Si$ structure is 2.94 V and 1.3V, respectively. The experimental results show that the BLT-based MFIS structure is suitable for non-volatile memory FETs with large memory window.

• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.101-106
• /
• 2008

The objective of the present study is to investigate the increase in the functional characteristics of a substrate by the formation of a thin coating layer. Thin coating layers of $Ti_5Si_3$ have high potential because $Ti_5Si_3$ exhibits high hardness. Shock induced reaction synthesis is an attractive fabrication technique to synthesize uniform coating layer by controlling the shock wave. Ti and Si powders to form $Ti_5Si_3$ using shock induced reaction synthesis, were mixed using high-energy ball mill into small scale. The positive effect of this technique is highly functional coating layer on the substrate due to ultra fine substructure, which improves the bonding strength. These materials are in great demand as heat resisting, structural and corrosion resistant materials. Thin $Ti_5Si_3$ coating layer was successfully recovered and showed high Vickers' hardness (Hv=1183). Characterization studies on microstructure revealed a fairly uniform distribution of powders with good interfacial integrity between the powders and the substrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.60-61
• /
• 2006

In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated. Results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLEO) applications.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.153-160
• /
• 2011

The AISI 216L stainless steel with a composition of Fe-16Cr-6Ni-6Mn-1.7Mo (wt.%) was oxidized at $700{\sim}900^{\circ}C$ in air for 100 h. At $700^{\circ}C$, a thin $Mn_{1.5}Cr_{1.5}O_4$ oxide layer with a thickness of $0.4{\mu}m$ formed. At $800^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $FeCr_2O_4$ oxide layer with a total thickness of $30{\mu}m$ formed. The non-adherent scale formed at $800^{\circ}C$ was susceptible to cracking. At $900^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $Mn_{1.5}Cr_{1.5}O_4$ oxide layer formed, whose total thickness was $10{\sim}15{\mu}m$. The scales formed at $900^{\circ}C$ were non-adherent and susceptible to cracking. 216 L stainless steel oxidized faster than 316 L stainless steel, owing to the increment of the Mn content and the decrement of Ni content.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.306-311
• /
• 2001

Effect of boundary layer thickness on the flow characteristics around a rectangular prism has been investigated by using a PIV(Particle Image Velocimetry) technique. Three different boundary layers(thick, medium and thin)were generated in the Atmospheric Boundary Layer Wind Tunnel at Pusan National University. The thick boundary layer having 670mm thickness was generated by using spires and roughness elements. The medium thickness of boundary layer$(\delta=270mm)$ was the natural turbulent boundary layer at the test section with fully long developing length(18m). The thin boundary layer with 36.5mm thickness was generated by on a smooth panel elevated 70cm from the wind tunnel floor. The Reynolds number based on the free stream velocity and the height of the model was $7.9{\times}10^3$. The mean velocity vector fields and turbulent kinetic energy distribution were measured and compared. The effect of boundary layer thickness is clearly observed not only in the length of separation bubble but also in the reattachment points. The thinner boundary layer thickness, the higher turbulent kinetic energy peak around the model roof. It is strongly recommended that the height ratio between model and approaching boundary layer thickness should be a major parameter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.723-727
• /
• 2003

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in $Ar/O_2$ atmosphere. SBN30 thin film of $1000{\AA}$ was pre-deposited as a seed layer on $Pt(100)/TiO_2/SiO_2/Si$ substrate followed by SBN60 deposition up to $3000{\AA}$ in thickness. As-deposited SBN60/SBN30 layer was heat-treated at different temperatures of 650, 700, 750, and $800^{\circ}C$ in air, respectively The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. There was no difference in the crystal structure with heat-treatment temperature, but the electric properties depended on the heating temperature and was the best at $750^{\circ}C$. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was $15{\mu}C/cm^2$, the coercive field (Ec) 75 kV/cm, and the dielectric constant 1075, respectively.

• Composites Research
• /
• 제32권6호
• /
• pp.314-318
• /
• 2019

본 연구에서는 습식 코팅 방식 중 하나인 다층박막적층법의 자동화 시스템을 제작하였다. 특히, 본 연구에서 제안한 자동화 시스템은 다층박막적층법의 공정 변수(예를 들어, 증착 재료, 코팅 깊이, 코팅 및 헹굼 시간)를 제어함으로써 손으로 작업하는 것과 동일한 변수 조작이 가능하게 설계되었다. 자동화 시스템을 통해 기판을 완벽하게 용액 안으로 침액시킬 수 있으며, 이를 통해 특별한 분자간 결합(예를 들어, 정전기적 인력, 공유 및 수소 결합)을 통해 기판 위에 균일한 다층의 박막 형성이 가능하다. 두 종류 이상의 용액으로 기판이 침액될 때, 이 기판은 다른 용액으로 이동되기 전에 청소 구역에서 헹굼과 건조 과정을 거친다. 이러한 담금, 헹굼, 건조 과정은 모두 컴퓨터 프로그램에 의해 제어 가능하다. 본 연구에서는 자동화 시스템을 통해 그래핀을 기반으로 하는 다층박막 샘플을 제작하였고, 균일한 그래핀의 적층 여부를 분석하기 위해 제작된 샘플의 흡광도와 두께를 측정하였다. 기판 위에 그래핀과 고분자 층의 적층이 진행될수록 흡광도와 두께가 균일하게 증가하는 결과를 통해, 본 연구에서 제작한 자동화 시스템이 수작업을 통한 다층박막의 적층을 완벽하게 대체 가능함을 알 수 있었다.