• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3810-3816
• /
• 2012

Here we report our recent result of a new semiconductor material, which has an asymmetric structure. The synthesized molecules consist of anthracene and thiophene connected by bridged ethylene and substituted with hexyl or dodecyl groups as pendants. The semiconductors were synthesized using a McMurry coupling reaction between anthracene-2-carbaldehyde and corresponding 5-hexyl(or dodecyl)thiophene-2-carbaldehyde. A first investigation of synthesized asymmetry AVHT (9a) and AVDT (9b) for the physical properties showed that they have high oxidation potential and thermal stability. The devices prepared by using AVHT (9a) and AVDT (9b) showed the mobility of $2.6{\times}10^{-2}cm^2/Vs$ and $4.4{\times}10^{-3}cm^2/Vs$, respectively, in solution processed OTFTs.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.816-820
• /
• 2013

We investigated the characteristics of the silicon oxy-nitride and nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) at the low temperature with a varying $NH_3/N_2O$ mixing ratio and a fixed $SiH_4$ flow rate. The deposition temperature was held at $150^{\circ}C$ which was the temperature compatible with the plastic substrate. The composition and bonding structure of the nitride films were investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Nitrogen richness was confirmed with increasing optical band gap and increasing dielectric constant with the higher $NH_3$ fraction. The leakage current density of the nitride films with a high NH3 fraction decreased from $8{\times}10^{-9}$ to $9{\times}10^{-11}(A/cm^2$ at 1.5 MV/cm). This results showed that the films had improved electrical properties and could be acceptable as a gate insulator for thin film transistors by deposited with variable $NH_3/N_2O$ mixing ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.330-332
• /
• 2009

Highly stable bottom gate thin film transistors(TFTs) with a zinc indium tin oxide(Zn-In-Sn-O:ZITO) channel layer have been fabricated by rf-magnetron co-sputtering using a indium tin oxide(ITO:90/10), a tin oxide and a zinc oxide targets. The ZITO TFT (W/L=$40{\mu}m/20{\mu}m$) has a mobility of 24.6 $cm^2$/V.s, a subthreshold swing of 0.12V/dec., a turn-on voltage of -0.4V and an on/off ratio of >$10^9$. When gate field of $1.8{\times}10^5$ V/cm was applied with source-drain current of $3{\mu}A$ at $60^{\circ}C$, the threshold voltage shift was ~0.18 V after 135 hours. We fabricated AM-OLED driven by highly stable bottom gate Zn-In-Sn-O TFT array.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1013-1019
• /
• 2007

[ $150^{\circ}C$ ]의 저온에서 플라즈마 화학기상증착 (PECVD) 방법으로 비정질 규소 및 질화규소 박막을 성막 하였다. 비정질 질화규소 박막은 소스 가스의 수소 분율을 증가시킴에 따라 굴절률이 1.9에 접근하고 질소-수소 결합이 주도적이 되어 고온성막한 박막에 버금가는 특성을 보였다. 비정질 규소 박막은 소스 가스의 수소 분율을 높임에 따라 굴절률과 광학적 금지대역의 크기가 고온 성막된 박막의 값인 4.2와 1.8 eV에 근접한 값을 가지게 되었으며, $[Si-H]/([Si-H]+[Si-H_2])$의 값이 증가하여 양질의 박막특성을 얻을 수 있었다. RF 전력 및 증착 압력에 대해서 낮은 전력과 작은 압력에서 양질의 박막을 얻을 수 있었으며, 박막 특성은 RF 전력 보다는 증착 압력의 변화에 대해서 좀더 큰 의존성을 보였다. 박막트랜지스터 제작에 적용 가능한 양질의 비정질 규소 및 질화규소 박막을 저온에서 얻기 위해서는 소스 가스의 수소 분율을 높게 하는 것이 중요한 공통 인자로 파악되었다.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.281-285
• /
• 2020

Oxide semiconductor devices have become increasingly important because of their high mobility and good uniformity. The channel length of oxide semiconductor thin film transistors (TFTs) also shrinks as the display resolution increases. It is well known that reducing the channel length of a TFT is detrimental to the current saturation because of drain-induced barrier lowering, as well as the movement of the pinch-off point. In an organic light-emitting diode (OLED), the lack of current saturation in the driving TFT creates a major problem in the control of OLED current. To obtain improved current saturation in short channels, we fabricated indium gallium zinc oxide (IGZO) TFTs with single gate and double gate structures, and evaluated the electrical characteristics of both devices. For the double gate structure, we connected the bottom gate electrode to the source electrode, so that the electric potential of the bottom gate was fixed to that of the source. We denote the double gate structure with the bottom gate fixed at the source potential as the BGFP (bottom gate with fixed potential) structure. For the BGFP TFT, the current saturation, as determined by the output characteristics, is better than that of the conventional single gate TFT. This is because the change in the source side potential barrier by the drain field has been suppressed.

• 한국재료학회지
• /
• 제19권1호
• /
• pp.33-36
• /
• 2009

Inorganic-organic composite thin-film-transistors (TFTs) of ZnO nanowire/Poly(3-hexylthiophene) (P3HT) were investigated by changing the nanowire densities inside the composites. Crystalline ZnO nanowires were synthesized via an aqueous solution method at a low temperature, and the nanowire densities inside the composites were controlled by changing the ultrasonifiaction time. The channel layers were prepared with composites by spin-coating at 2000 rpm, which was followed by annealing in a vacuum at $100^{\circ}C$ for 10 hours. Au/inorganic-organic composite layer/$SiO_2$ structures were fabricated and the mobility, $I_{on}/I_{off}$ ratio, and threshold voltage were then measured to analyze the electrical characteristics of the channel layer. Compared with a P3HT TFT, the electrical properties of TFT were found to be improved after increasing the nanowire density inside the composites. The mobility of the P3HT TFT was approximately $10^{-4}cm^2/V{\cdot}s$. However, the mobility of the ZnO nanowire/P3HT composite TFT was increased by two orders compared to that of the P3HT TFT. In terms of the $I_{on}/I_{off}$ ratio, the composite device showed a two-fold increase compared to that of the P3HT TFT.

• 대한금속재료학회지
• /
• 제50권8호
• /
• pp.613-618
• /
• 2012

We report on electrical and mechanical properties of silicon nitride ($SiN_x$) films deposited by a plasma enhanced chemical vapor deposition (PECVD) method at $200^{\circ}C$ from $SiH_4$ highly diluted in $N_2$. The films were also prepared from $SiH_4$ diluted in He for comparison. The $N_2$ dilution was also effective in improving adhesion of the $SiN_x$ films, fascilitating construction of thin film transistors (TFTs). Metal-insulator-semiconductor (MIS) and Metal-insulator-Metal (MIM) structures were used for capacitance-voltage (C-V) and current-voltage (I-V) measurements, respectively. The resistivity and breakdown field strength of the $SiN_x$ films from $N_2$-diluted $SiH_4$ were estimated to be $1{\times}10^{13}{\Omega}{\cdot}cm$, 7.4 MV/cm, respectively. The MIS device showed a hysteresis window and a flat band voltage shift of 3 V and 0.5 V, respectively. The TFTs fabricated by using these films showed a field-effect mobility of $0.16cm^2/Vs$, a threshold voltage of 3 V, a subthreshold slope of 1.2 V/dec, and an on/off ratio of > $10^6$.

• 한국정보전자통신기술학회논문지
• /
• 제15권3호
• /
• pp.205-210
• /
• 2022

본 논문은 OLED 구동 박막 트랜지스터의 문턱전압 변동에 의한 AMOLED 디스플레이의 휘도 불균일도를 개선하기 위해 n-채널 박막 트랜지스터만을 사용한 새로운 OLED 화소회로를 제안하였다. 제안한 OLED 화소회로는 6개의 n-채널 박막 트랜지스터와 2개의 커패시터로 구성하였다. 제안한 OLED 화소회로의 동작은 커패시터 초기화 구간, OLED 구동 박막 트랜지스터의 문턱전압을 감지하는 구간, 영상 데이터 전압 기입 구간 및 OLED 발광 구간으로 구성되어 있다. SmartSpice 시뮬레이션 결과, OLED·구동 박막 트랜지스터의 문턱전압이 1.5±0.3 V 변동 시 제안한 OLED 화소회로는 OLED 전류 1 nA에서 최대 전류 오차가 5.18 %이고 OLED 음극 전압이 0.1 V 상승 시 제안한 OLED 화소회로가 기존 OLED 화소회로보다 OLED·전류 변화가 매우 적었다. 그러므로, 기존 OLED 화소회로보다 제안한 화소회로가 문턱전압 변동 및 OLED 음극 전압 상승에 뛰어난 보상 특성을 가진다는 것을 확인하였다.

• 청정기술
• /
• 제30권1호
• /
• pp.13-22
• /
• 2024

본 연구에서는 6,13-Bis(triisopropylsilylethynyl)pentacene(TP):2-Decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene(BT):Poly styrene (PS) 블랜딩 thin film transistor (TFT)를 제작 광 흡수 센서로의 활용에 대해 탐구한다. BT의 혼합으로 인해 off current 감소와 on/off ratio 향상을 동시에 달성하였다. 특히, TP:BT:PS (1:0.25:1 w/w) 샘플은 우수한 광 흡수 특성을 보여주었고, 이를 통해 높은 성능의 광 흡수 장치 제작이 가능함을 입증했다. 다양한 혼합 비율의 결정 구조와 전기적 특성에 대한 분석을 통해 TP:BT:PS (1:0.25:1 w/w) 샘플이 최적임을 확인하였다. 이 결과는 광 흡수 장치의 발전 뿐만 아니라 혼합 organic semiconductor (OSC)의 광전자 시스템 개발에 긍정적인 기대효과를 미칠 수 있을 것이며, 이를 통해 단일 OSC 사용의 제약을 극복하고, 미세 조정된 광학 응답을 갖춘 고성능 OSC TFT를 제작하여 의료 전자소자, 산업용 전자소자 등에 응용할 수 있을 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.