• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.113-116
• /
• 2005

In this paper, a computational and experimental analysis about the flow behavior of thin polymer film in the spin coating process for stable cover layer coating of a blu-ray disc is described. The blu-ray disc, a next-generation optical disc format over 25GB, consists of a 1.1mm thick substrate and a 0.1mm tick cover layer. Generally, cover layer on the blu-ray disc is made by the polymer spin coating process. However, it is hard to secure sufficient coating uniformity around the rim on the cover layer. In order to get the uniform thickness deviation and to minimize the bead around the rim, the edge of the disc substrate can be modified into various shapes around the rim on the disc and analyzed with various parameters, such as surface tension, viscosity, and rotation speed, etc. The optimal shape of the rim was tried to get by 3 dimensional computer simulation of the polymer expulsion process.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5172-5177
• /
• 2011

본 논문은 박막 실리콘 태양전지에 적용되는 반사방지 또는 고반사 코팅 기술에 관한 연구이다. 태양광 흡수율을 개선하기 위하여 박막 실리콘 태양전지의 앞면에는 반사를 줄이는 반사방지막 기술이 필요하며, 뒷면에는 반대로 반사를 높이는 고반사 기술이 필요하다. 반사방지막 기술에서 단층의 구조에서는 코팅의 두께에 따라 반사율이 틀려지고, 적절한 범위에서 두께를 제어하면 낮은 반사율을 얻을 수 있다. 대칭형태의 다층의 구조에서는 단층구조에 비해서 넓은 파장대에 걸쳐서 낮은 반사율을 얻을 수 있다. 또한 뒷면에 적용되는 고반사막 기술에서는 높은 굴절율을 갖는 매질과 낮은 굴절율을 갖는 매질을 대칭 구조로 구성하여 계산한 결과 높은 반사율을 얻을 수 있다는 것을 확인하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.135-135
• /
• 2016

Recently flexible electrode materials have attracted attention in various electrical devices. In general, copper(Cu) is widely used electrical conductive material. However, Cu film showed drastically reduction of electrical conductivities under an applied tensile strain of 10%. These poor mechanical characteristics of Cu have difficulty applying in flexible electronic applications. In this study, mechanical flexibilities of Cu thin film were improved by hybridization with carbon nanotubes(CNTs) and laser sintering. First, thin carbon nanotube films were fabricated on a flexible polyethylene terephthalate(PET) substrate by using ultrasonic spray coating of CNT dispersed solution. After then, physically connected CNT-Cu NPs films were formed by utilizing ultrasonic spray coating of Cu nanoparticles dispersed solution on prepared CNT thin films. Finally, CNT-Cu thin films were firmly connected by laser sintering. Therefore, electrical stabilities under mechanical stress of CNT-Cu hybrid thin films were compared with Cu thin films fabricated under same conditions to confirm improvement of mechanical flexibilities by hybridization of CNT and Cu NPs.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.124-124
• /
• 2003

To improve the electrochemical properties of thin-film LiCoO$_2$ cathodes, metal oxides were coated on the LiCoO$_2$ thin films using f sputtering. Galvanostatic charge-discharge experiments showed the enhanced cycling behaviors in the metal-oxide coated LiCoO$_2$ thin films than the uncoated ones. These results are because the metal-oxide coating layer suppresses the degradation of Li-diffusion kinetics during cycling, which is related to the protection of cathode surface from the electrolytes [l-3]. The variation in the metal-oxide coating thickness ranging from 10 to 300 nm did not affect the electrochemical properties. Changes of lattice constants in the coated and bare LiCoO$_2$ thin films at different charged states will also be discussed.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.531-536
• /
• 2012

We herein present results of flat and uniform polymer-blended small molecular semiconductor thin films. Which were produced for organic thin film transistors (OTFTs), using a simple pre-metered horizontal dipping process. The organic semiconducting thin films were composed of 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-PEN) composite blended with a polymer binder of poly(${\alpha}$-methylstyrene) (PaMS). We show that the pre-metered horizontal-dip-coating(H-dip-coating) process allowed the critical control of the thickness of the blended TIPS-PEN:PaMs thin film. The fabricated OTFTs using the TIPS-PEN:PaMs films exhibited maximum field-effect mobility of $0.22\;cm^2\;V^{-1}\;s^{-1}$. These results demonstrated that H-dip-coated TIPS-PEN:PaMS films show considerable promise for the production of reliable, reproducible, and high-performance OTFTs.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.74-78
• /
• 1999

For a high efficient field emission display (FED), the specific vacuum conditions below 10-7 Torr should be required. However, because the FED has the geometrical restriction due to its micro size, the thin film getters can be proposed for chemical pumping as a way to reduce impurity gases in the panel. The thin film getters, developed by employing the coating of new materials such as NI or Pt on getter surface, can be used without any activation process and show the enhanced sorption characteristics. Especially, using the Zr (1${\mu}{\textrm}{m}$) thin film getters with the Pt surface layer, the significant gettering for various active gases could be achieved from 9$\times$10-5 Torr to 1$\times$10-6 Torr or below. this good sorption properties is mainly contributed to the surface coating layer which shows the catalytic effect for gas dissociation and protects the getter materials against oxidation.

• 한국결정성장학회지
• /
• 제10권6호
• /
• pp.378-380
• /
• 2000

The epitaxial $BaTiO_{3}$ thin film was prepared on the MgO substrate by the coating-pyrolysis process using a mixed solution of Ba-naphthenate and Ti-naphthenate. The crystal structure of the epitaxial $BaTiO_{3}$ thin film was characterized by XRD ${\theta}/2{\theta}$ scan and asymmetric {303} rocking curve scan. The epitaxial $BaTiO_{3}$ thin film had the cubic phase with the lattice parameter of a = c = 0.4018 nm.

• 한국결정성장학회지
• /
• 제26권6호
• /
• pp.220-224
• /
• 2016

초음파 스프레이를 이용하여 유리기판 위에 반사방지 박막이 제조되었다. GPTMS와 TEOS는 솔-젤 하이브리드 코팅 용액을 제조하기 위하여 사용되었다. 반사방지막의 코팅 두께를 제어하기 위하여 스프레이 노즐의 이동속도는 15~25 mm/s로 변경되었다. 스프레이 노즐의 이동속도가 증가 됨에 따라 반사방지막의 두께는 138 nm에서 86 nm로 감소되었다. 20 mm/s의 노즐 이동속도에 의해 제조된 반사방지막의 굴절률은 약 1.31, 막의 두께는 104 nm이며, 380 nm에서 780 nm의 가시광 영역에서의 평균 반사율은 0.75 %, 투과율은 94 %로 측정되었다.

• 반도체디스플레이기술학회지
• /
• 제2권1호
• /
• pp.25-29
• /
• 2003

The fluid flow, mass transfer, heat transfer and film thickness variation during the spin coating process are numerically studied. The model is said to be I-dimensional because radial variations in film thickness, concentration and temperature are ignored. The finite difference method is employed to solve the equations that are simplified using the similarity transformation. In early time, the film thinning is due to the radial convective outflow. However that slows during the first seconds of spinning so the film thinning due to evaporation of solvent becomes sole. The time varing film thickness is analyzed according to the wafer spin speed, the various solvent fraction in the coating liquid, and the various solvent vapor fraction in the bulk of the overlying gas during the spin coating is estimated.

• 대한기계학회논문집B
• /
• 제39권5호
• /
• pp.463-469
• /
• 2015

산화그래핀 소재를 합성하여 투명한 박막 코팅기술을 개발하고 특성을 평가하였다. 스핀과 스프레이 공정을 동시에 이용하여 산화그래핀을 유리 기판에 균일하게 박막코팅을 하였다. 균일하게 산화그래핀을 스핀-스프레이 공정을 이용하여 박막코팅을 하기 위하여 유리기판을 amine-functional group으로 표면개질을 하였다. 또한, 스핀-스프레이 공정을 이용하여 산화그래핀 박막을 4층까지 적층을 하였고 86% 이상의 투명도를 확보하였다. 이와 같은 합성된 산화그래핀 박막소재의 스핀-스프레이 코팅 기술은 다양한 전자제품들의 display를 대면적으로 코팅할 수 있을 것으로 기대되어진다.