• 비파괴검사학회지
• /
• 제24권4호
• /
• pp.307-314
• /
• 2004

배관의 축방향 균열 검사를 위하여 원주 방향으로 진행하는 유도초음파 모드를 적용하였다. 배관의 곡률을 변수로 원주 유도초음파의 분산선도를 계산하였으며 이를 배관 검사에 적용하기 위하여 중수로 피더관의 곡관부 축방향 균열을 탐지에 적용하였다. 상대적으로 낮은 주파수에서는 Lamb 파 특성을 따르나 주파수가 증가함에 따라 평판의 경우, 즉 곡률이 무한대인 경우 첫 번째 $A_0$ 모드와 두 번째 $S_0$ 모드가 합쳐져서 Rayleigh 모드 형태로 변화한다. 한편 곡률을 가진 배관의 경우는 주파수가 증가하더라도 첫 번째 모드와 두 번째 모드가 합쳐지지 않았다. 이러한 해석을 기초로 하여 배관의 일종인 중수로 피더관 곡관부 축방향 결함을 탐지하기 위하여 사각 탐촉자를 사용하여 Rocking 원주 유도초음파 기법을 적용하였다. 원주 방향으로 유도파를 진행시키면서 인공 결함으로부터의 수집된 신호를 분석하여 진동 모드를 확인하였으며 두께 대비 10% 깊이의 notch도 검출할 수 있음을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.2587-2593
• /
• 2014

세라믹 사출공정(CIM)은 산업 분야 전반에 걸쳐 널리 사용되고 있는 공정 중 하나로, 점차 의료용 전자기기의 부품 등으로 확대 적용되고 있다. 본 연구에서는 FEM 해석을 통해 CIM의 공정변수가 제품의 품질에 미치는 영향을 분석했다. 단순평판 형상의 해석결과를 기초로 구멍이 있는 형상, 모서리부가 둥근 형상 및 측벽 구조가 있는 형상 등과 비교 분석했다. 구멍이 있는 형상의 경우, 구멍 주변에 밀도분포가 고르지 못하며 용접선(weld-line)과 같은 결함이 발생할 수 있음을 예측할 수 있었다. 반면 제품의 모서리부 반경이 크면 성형성 및 유동성이 좋아지는 것을 확인했다. 따라서 CIM 공정변수 뿐만 아니라 제품의 형상변수도 고려해야 한다. 해석결과 온도, 초기분율, 속도 등의 공정변수는 제품의 품질 향상을 위한 중요한 설계 변수가 될 수 있음을 확인할 수 있었다.

• 한국전산구조공학회논문집
• /
• 제31권6호
• /
• pp.315-329
• /
• 2018

최근 국내에서는 고층 벽식 아파트 건설 시, 하부 주차공간과 공용공간 확보를 위하여 RC 전이슬래브 시스템을 사용하는 경우가 증가하고 있다. 하지만 두께가 얇은 RC 무량판 슬래브를 위해 개발된 설계방법 및 구조성능평가 방법을 두께가 매우 두꺼운 전이슬래브 구조설계에 그대로 사용하고 있다는 문제점이 있다. 따라서 합리적인 전이슬래브의 구조설계를 위해서는 RC 전이슬래브 시스템의 2면 전단거동 양상에 대한 명확한 분석이 필요하다. 이에 따라 본 연구에서는 전이슬래브의 두께, 콘크리트 강도, 전단경간비, 철근비 등 다양한 설계변수에 따라 비선형 FEM을 이용하여 전이슬래브의 2면 전단거동을 분석하였다. 또한 비선형 FEM 해석결과와 기존의 2면 전단강도 평가식으로 예측한 전단강도를 비교분석하여 기존 평가식의 전이슬래브 2면 전단강도 평가 유효성을 검토하였다.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.144-150
• /
• 2018

In this study, the freezing process of L-shaped pipe exposed to the outside was investigated numerically by considering the mushy zone of freezing water. From the numerical results, it was found that the flow was outwardly directed due to the influence of the L-shaped bending part in the outside exposed part of the pipe, and the ice was formed in the shape of longitudinal corrugation on the wall surface of the pipe after the bending part. It is confirmed that this phenomenon is caused by the venturi effect due to the freezing as seen in connection with the velocity distribution in the pipe. It is found that the remelting phenomenon at the end of the freezing section occur simultaneously during the process of forming the ice in the pipe section. In regard of the factors affecting freezing, it was found that the thickness of the freezing layer is increased as the exposed pipe surface temperature is decreased, and the pipe surface temperature had a significant effect on the change of the freezing layer thickness. At the same time, it was found that the freezing layer becomes relatively thin when the water inflow rate is increased. This phenomenon was caused by reducing the exposure time of freezing water due to the vigorous flow convection of the water fluid.

• Journal of Microbiology and Biotechnology
• /
• 제31권5호
• /
• pp.756-763
• /
• 2021

Agarose is a linear polysaccharide composed of ᴅ-galactose and 3,6-anhydro-ʟ-galactose (AHG). It is a major component of the red algal cell wall and is gaining attention as an abundant marine biomass. However, the inability to ferment AHG is considered an obstacle in the large-scale use of agarose and could be addressed by understanding AHG catabolism in agarolytic microorganisms. Since AHG catabolism was uniquely confirmed in Vibrio sp. EJY3, a gram-negative marine bacterial species, we investigated AHG metabolism in Streptomyces coelicolor A3(2), an agarolytic gram-positive soil bacterium. Based on genomic data, the SCO3486 protein (492 amino acids) and the SCO3480 protein (361 amino acids) of S. coelicolor A3(2) showed identity with H2IFE7.1 (40% identity) encoding AHG dehydrogenase and H2IFX0.1 (42% identity) encoding 3,6-anhydro-ʟ-galactonate cycloisomerase, respectively, which are involved in the initial catabolism of AHG in Vibrio sp. EJY3. Thin layer chromatography and mass spectrometry of the bioconversion products catalyzed by recombinant SCO3486 and SCO3480 proteins, revealed that SCO3486 is an AHG dehydrogenase that oxidizes AHG to 3,6-anhydro-ʟ-galactonate, and SCO3480 is a 3,6-anhydro-ʟ-galactonate cycloisomerase that converts 3,6-anhydro-ʟ-galactonate to 2-keto-3-deoxygalactonate. SCO3486 showed maximum activity at pH 6.0 at 50℃, increased activity in the presence of iron ions, and activity against various aldehyde substrates, which is quite distinct from AHG-specific H2IFE7.1 in Vibrio sp. EJY3. Therefore, the catabolic pathway of AHG seems to be similar in most agar-degrading microorganisms, but the enzymes involved appear to be very diverse.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.137-149
• /
• 2021

In engineering design, the axial equivalent elastic modulus of laminated FRP pipe was mostly calculated by the average elastic modulus method or the classical laminated plate theory method, which are based on relatively simplified assumptions, and may be not accurate enough sometimes. A new analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipe was established based on three-dimensional stress state. By comparing the results calculated by this method with those by the above two traditional analytical methods and the finite element method, it is found that this method for the axial equivalent elastic modulus fits well not only for thin-walled pipes with orthotropic layers, but also for thick-walled pipes with arbitrary layers. Besides, the influence of the layer stacking on the axial equivalent elastic modulus was studied with this method. It is found that a proper content of circumferential layer is beneficial for improving the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers, and then can reduce its material quantity under the premise that its axial stiffness remains unchanged. Finally, the meso-mechanical mechanism of this effect was analyzed. The improving effect of circumferential layer on the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers is mainly because that, the circumferential fibers can restrain the rigid body rotations of the oblique fibers, which tend to cause the significant deformations of the pipe wall units and the relatively low axial equivalent elastic modulus of the pipe.

• Parasites, Hosts and Diseases
• /
• 제59권1호
• /
• pp.47-53
• /
• 2021

Echinostoma mekongi was reported as a new species in 2020 based on specimens collected from humans in Kratie and Takeo Province, Cambodia. In the present study, its metacercarial stage has been discovered in Filopaludina martensi cambodjensis snails purchased from a local market nearby the Tonle Sap Lake, Pursat Province, Cambodia. The metacercariae were fed orally to an experimental hamster, and adult flukes were recovered at day 20 post-infection. They were morphologically examined using light and scanning electron microscopes and molecularly analyzed by sequencing of their mitochondrial cox1 and nad1 genes. A total of 115 metacercariae (1-8 per snail) were detected in 60 (60.0%) out of 100 Filopaludina snails examined. The metacercariae were round, 174 ㎛ in average diameter (163-190 ㎛ in range), having a thin cyst wall, a head collar armed with 37 collar spines, and characteristic excretory granules. The adult flukes were elongated, ventrally curved, 7.3 (6.4-8.2)×1.4 (1.1-1.7) mm in size, and equipped with 37 collar spines on the head collar (dorsal spines in 2 alternating rows), being consistent with E. mekongi. In phylogenetic analyses, the adult flukes showed 99.0-100% homology based on cox1 sequences and 98.9-99.7% homology based on nad1 sequences with E. mekongi. The results evidenced that F. martensi cambodjensis snails act as the second intermediate host of E. mekongi, and hamsters can be used as a suitable experimental definitive host. As local people favor to eat undercooked snails, these snails seem to be an important source of human infection with E. mekongi in Cambodia.

• Structural Engineering and Mechanics
• /
• 제84권1호
• /
• pp.113-127
• /
• 2022

Steel plate shear walls (SPSWs) are commonly utilized to provide lateral stiffness in high-rise structures. The simplified model is frequently used instead of the fine-scale model in the design of buildings with SPSWs. To predict the lateral strength of steel plate shear walls with diagonal stiffeners (DS-SPSWs), a simplified model is presented, namely the cross brace-strip model (CBSM). The bearing capacity and internal forces of columns for DS-SPSWs are calculated. In addition, a modification coefficient is introduced to account for the shear action of the thin plate. The feasibility of the CBSM is validated by comparing the numerical results with theoretical and experimental results. The numerical results from the CBSM and fine-scale model, which represent the bearing capacity of the DS-SPSW with varied stiffened plate dimensions, are in good accord with the theoretical values. The difference in bearing capacity between the CBSM and the fine-scale model is less than 1.35%. The errors of the bearing capacity from the CBSM are less than 5.67% when compared to the test results of the DS-SPSW. Furthermore, the shear and axial forces of CBSM agree with the results of the fine-scale model and theoretical analysis. As a result, the CBSM, which reflects the contribution of diagonal stiffeners to the lateral resistance of the SPSW as well as the effects on the shear and axial forces of the columns, can significantly improve the design accuracy and efficiency of buildings with DS-SPSWs.

• Advances in materials Research
• /
• 제12권3호
• /
• pp.243-261
• /
• 2023

This study aims to analyze the mechanical buckling behavior of a single-walled carbon nanotube (SWCNT) integrated with a one-parameter elastic medium and modeled as a Kerr-type foundation under a longitudinal magnetic field. The structure is considered homogeneous and therefore modeled utilizing the nonlocal first shear deformation theory (NL-FSDT). This model targets thin and thick structures and considers the effect of the transverse shear deformation and small-scale effect. The Kerr model describes the elastic matrix, which takes into account the transverse shear strain and normal pressure. Using the nonlocal elastic theory and taking into account the Lorentz magnetic force acquired from Maxwell relations, the stability equation for buckling analysis of a simply supported SWCNT under a longitudinal magnetic field is obtained. Moreover, the mechanical buckling load behavior with respect to the impacts of the magnetic field and the elastic medium parameters considering the nonlocal parameter, the rotary inertia, and transverse shear deformation was examined and discussed. This study showed useful results that can be used for the design of nano-transistors that use the buckling properties of single-wall carbon nanotubes(CNTs) due to the creation of the magnetic field effect.

• 한국지반공학회논문집
• /
• 제24권5호
• /
• pp.79-87
• /
• 2008

최근에 벤더 엘리먼트를 이용한 현장탄성파 프로브(probe, MudFork로 명명됨)가 개발되어 정밀하고 수월하게 연약지반의 전단파 속도를 측정할 수 있게 되었다. 이 탄성파시험의 용도를 확장하고자 강성도 측정과 함께 전단강도와 밀도를 추정할 수 있는 상관관계를 시도하였다. 인천의 한 연약지반 현장에서 콘시험과 MudFork를 사용하여 현장탄성파시험을 수행하고, 시료를 채취하여 실내에서 삼축압축시험과 병행하여 공시체의 전단파 속도를 측정하였다. 이 결과로부터 연약지반의 전단강도와 전 단파속도의 상관관계와, 밀도와 전 단파속도의 상관관계를 정립하였다.