• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1044-1051
• /
• 2009

During contact between surfaces, there is wear and the generation of wear. The particles contained in the lubricating oil carry detailed and important monitoring information about the condition of the machine. Therefore, this paper was undertaken for the Ferrography system of wear debris generated from a lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of the Pin and V-Block types by Ti(C,N) coated. It was shown from the test results that wear particle concentration(WPC), wear severity index(Is) and size distribution have come out all higher with increases in sliding friction time. With the Ferrogram thin leaf wear debris as well as ball and plate type wear particles were observed.

• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.220-226
• /
• 2006

Component having antioxidant activity on lard during heating was separated from hexane extract of spinach, and its characteristic chemical structure was speculated through nuclear magnetic resonance spectroscopy, liquid chromatography-mass spectrometry, and Fourier transform infrared spectrophotometry. Lard was heated with hexane-, ethyl ether-, ethyl acetate-, or ethanol extract of spinach at $180^{\circ}C$ for 20 hr. Hexane extract of spinach, having highest antioxidant activity on lard during heating, was fractionated by silicic acid column chromatography (SACC), and SACC fractions having higher antioxidant activity on lard during heating were further separated by thin layer chromatography (TLC). Isolated compound from SACC fractions of hexane extract of spinach by TLC had sugar moieties and benzene ring along with hydroxy, carbonyl, and alkyl groups in the structure.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.603-609
• /
• 2006

Tricyanopyrrolidene chromophores were prepared in order to compare their macroscopic nonlinear optical (NLO) properties with a conjugated structure through the long molecular axis. A thiophene or phenyl ring was tethered to an ethylenic bond; it may act as a lateral moiety to disrupt the planarity of a chromophore and lessen the electrostatic interaction. Thin film composites of these chromophores dissolved in amorphous polycarbonate (APC) were fabricated. Real time pole and probe method was employed to investigate the change of electro-optic (EO) signal during poling. The EO properties and their relaxation behaviors of the guest-host systems containing newly synthesized chromophores were investigated in detail.

• 한국가축번식학회지
• /
• 제9권1호
• /
• pp.46-55
• /
• 1985

In order to investigate the spermiogenesis of the Korean goat, the tissue obtained from the testis and the epididymis of eight matured bucks were conventionary prepared as thin sections and these sections were observed under a transmission electron microscope. Based on the development of the varous permanent organelles and certain transient structures, the spermiogenesis of the Korean goat could be divided into four main phases: Golgi, cap, acrosome and maturation; and these phases had been further subdivided into a total of nine stages. There was abundance of the contents of acrosomal vesicle contained ring-shaped material surrounding the acrosome in the early cap stage. The mitochondria made the mitochondrial sheath started from the annulus towarding the neck and formed helical arrangement in the mid maturation stage, The postacrosomal denselamina was a, pp.ared to be wave-shape in the late maturation stage. The spermiogenesis of the Korean goat was found to be basically similar to that of the Korean cattle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.31-34
• /
• 2003

The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by chemical and mechanical polishing(CMP) process. The sapphire crystalline wafers were characterized by double crystal X-ray diffraction. The sample quality of sapphire crystalline wafer at surfaces has a full width at half maximum 89 arcses. The surfaces of sapphire wafers were mechanically affected by residual stress and surface default. Sapphire wafers's waveness has higher abrasion rate in the edge of the wafer than its center due to Newton's Ring interference.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.85-91
• /
• 2004

The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by chemical and mechanical polishing process. The sapphire crystalline wafers were characterized by double crystal X-ray diffraction. The sample quality of sapphire crystalline wafer at surfaces has a full width at half maximum of 89 arcsec. The surfaces of sapphire wafer were mechanically affected by residual stress during the polishing process. The wave pattern of optical interference of sapphire wafer implies higher abrasion rate in the edge of the wafer than its center from the Newton's ring.

• 천문학회보
• /
• 제41권1호
• /
• pp.39.2-39.2
• /
• 2016

The central regions of barred-spiral galaxies contain interesting gaseous structures such as dust lanes located at the leading side of the bar and nuclear rings that are sites of intense star formation. Our previous studies showed how gas structures form under the influence of a non-axisymmetric bar potential and temporal/spatial behavior of the star formation in nuclear rings. However, previous works were limited to 2-dimensional infinitesimally-thin, unmagnetized and isothermal disks. To study effects of cooling/heating, vertical motions of gas structures and magnetic field, we use Mesh-Free magneto-hydrodynamic simulation code GIZMO. We find that temporal variations of the star formation rates in the nuclear ring in the three-dimensional model are overall similar those in the previous two-dimensional results, although the former shows more violent small-scale fluctuations near the early primary peak. We will present our recent results about evolution of gaseous structures and star formation rate compare with results of previous studies.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.643-655
• /
• 2020

Active control of nonlinear vibration of stiffened functionally graded (SFG) cylindrical shell is studied in this paper. The system is subjected to axial and transverse periodic loads in the presence of thermal uncertainty. The material composition is considered to be continuously graded in the thickness direction, also these properties depend on temperature. The relations of strain-displacement are derived based on the classical shell theory and the von Kármán equations. For modeling the stiffeners on the cylindrical shell surface, the smeared stiffener technique is used. The Galerkin method is used to discretize the partial differential equations of motion. Some comparisons are made to validate the SFG model. For suppression of the nonlinear vibration, the linear and nonlinear control strategies are applied. For control objectives, the piezoelectric actuator is attached to the external surface of the shell and the thin ring piezoelectric sensor is attached to the middle internal surface of shell. The effect of PID, feedback linearization and sliding mode control on the suppression of vibration for SFG cylindrical shell is presented.

• 대한화학회지
• /
• 제28권5호
• /
• pp.323-327
• /
• 1984

극성 용매인 물과 비극성 용매인 염화메틸렌에서 각각 니코틴을 당량의 오존과 반응시켜 그 생성물을 기체 크로마토그라피로 조사한 후 관 크로마토그래피 및 얇은 막 크로마토그래피를 이용하여 분리하였다. 이들 6가지 물질을 NMR, IR 및 Mass로 구조를 확인한 결과, 미반응의 니코틴 l-nornicotine, anabasine, ${\beta}$-nicotyrine, cotinine 및 nicotine-N-oxide임이 밝혀졌다. 이 생성물들을 토대로 두 액상에서의 니코틴 오존화 반응은 피롤리딘 고리의 1'위치에서 1차 산화가 일어나는 반응 메카니즘을 제안하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.339-343
• /
• 1999

This paper reports the characteristics of poly-Si TFT unitary CMOS circuits fabricated with various techniques, in order to investigate the optimum process conditions. The active films were deposited by PECVD and LPCVD using $SiH_4\; and\; Si_2H_6$ as source gas, and annealed by SPC and ELA methods. The impurity doping of the oource and drain electrodes was performed by ion implantation and ion shower. In order to investigate the AC characteristics of the poly-Si TFTs processed with various methods, we have examined the current driving characteristics of the polt-Si TFT and the frequency characteristics of 23-stage CMOS ring oscillators. Ithas been observed that the circuits fabricated using $Si_2H_6$ with low-temperature process of ELA exhibit high switching speed and current driving performances, thus suitable for real application of large area electronics.