• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.222-229
• /
• 2009

In this paper, we designed and fabricated the EM wave absorbers for preventing the reduction of the communication range when RFID Tag is approached to a metal plate. The EM wave absorber samples were fabricated with difference composition ratios of Amorphous metal powder and CPE, the absorption abilities of which were simulated by substituting different thicknesses of the EM wave absorbers. Then the EM wave absorbers are manufactured based on the simulated results. By using the EM wave absorbers, we have confirmed the improvement effect of RFID tag antenna and the increase of communication range of RFID system. As a result, it was cleary shown that the communication range of RFID system is improved by adopting the EM wave absorber with the composition ratio of Amorphous metal powder:CPE=80:20 wt.% and the thickness of 4 mm. Thus, it was confirmed that the proposed EM wave absorber can increase the communication range of RFID system from 0.8 m to 5.2 m in UHF band.

• Journal of Animal Science and Technology
• /
• v.56 no.7
• /
• pp.24.1-24.6
• /
• 2014

The present study investigated the effects of varying durations of nursery diets differing in percentages of milk products on growth performance of pigs during the nursery phase (NP) and subsequent grow-finish phase (GFP) to find the feasibility of reducing the use of nursery diets containing costly milk products. A total of 204 21-d-old weanling female and castrated male pigs were subjected to one of three nursery phase feeding programs differing in durations on the NP 1 and 2 and GFP diets containing 20%, 7%, and 0% lacrosse and 35%, 8%, and 0% dried whey, respectively, in 6 pens (experimental units) for 33 d: HIGH (NP 1, 2 and 3 diets for 7, 14, and 12 d), MEDIUM (NP 2 and 3 for 14 and 19 d), and LOW (NP 2 and 3 and GFP 1 for 7, 14, and 12 d). Subsequently, 84 randomly selected pigs [14 pigs (replicates)/pen] were fed the GFP 1, 2 and 3 diets during d 54-96, 96-135, and 135-182 of age, respectively. The final body weight (BW) and average daily gain (ADG) of nursery pigs did not differ among the HIGH, MEDIUM, and LOW groups (14.8, 13.3, and 13.7 kg in BW and 273, 225, and 237 g in ADG, respectively). The average daily feed intake during the nursery phase was greater (p < 0.01) in the HIGH group than in the MEDIUM and LOW groups, whereas the gain:feed ratio did not differ across the treatments. The BW on d 182 and ADG during d 54-182 were greater in the HIGH and MEDIUM groups vs. the LOW group (110.0, 107.6, and 99.6 kg in BW, respectively; p < 0.01). The backfat thickness and carcass grade at slaughter on d 183 did not differ across the treatments. In conclusion, the MEDIUM program may be inferior to the commonly used HIGH program in supporting nursery pig growth. Nevertheless, the former appears to be more efficient than the latter in production cost per market pig whereas the LOW program is thought to be inefficient because of its negative effect on post-nursery pig growth.

• Korean Journal of Poultry Science
• /
• v.25 no.4
• /
• pp.177-183
• /
• 1998

A feeding trial was conducted to investigate the performance of various Korean Native Chickens (KNC) for 64 weeks. Eight hundreds and ten KNC one-day birds were arranged to three strains, Dark Brown(D), Light Brown(L) and Black(B). Each strain had three replicates of 90 birds a replicate. Birds fed same diet with Korean standard feeding. Data were obtained growing performance to 20 week of age and laying performance from twenty one to sixty four week. During the growing stage from hatch to 20 week of age, there were not significant difference to three strains on viability, body weight and feed intake. L strain tended to be earlier 50％ egg production day than that of other strains, but was not significantly different. Egg production of L strain was the highest of strains. It showed significantly higher egg production compared to that of D strain(P<0.05), but was not statistically different from that of B strain. Laying peak period was between 28 to 32 week of age in all strains, Egg weight was heavier in D strain(P<0.05). Feed intake was the same as 105g, and feed conversion improved in L strain(P<0.05). There were not difference on interior egg and eggshell quality by strains although eggshell thickness improved slightly in D strain. Fertility of D strain was the highest compared to others(P<0.05) regardless laying stages. Hatchability was not influenced by strains at 39 weeks old, but was significantly higher in B strain at 62 week of age(P< 0.05). The results of this experiment indicated that KNC 3 strains were not effect on egg production, feed intake and feed conversion ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.302-307
• /
• 2016

The technology of multistage deep drawing has been widely applied in the metal forming industry, in order to reduce both the manufacturing cost and time. A battery can used for mobile phone production is a well-known example of multistage deep drawing. It is very difficult to manufacture a battery can, however, because of its large thickness to height aspect ratio. Furthermore, the production of the final parts may result in assembly failure due to springback after multistage deep drawing. In industry, empirical methods such as over bending, corner setting and ironing have been used to reduce springback. In this study, a bottoming approach using the finite element method is proposed as a practical and scientific method of reducing springback. Bottoming induces compression stress in the deformed blank at the final stroke of the punch and, thus, has the effect of reducing springback. Different cases of the bottoming process are studied using the finite element program, DYNAFORM, to determine the optimal die design. The results of the springback simulation after bottoming were found to be in good agreement with the experimental results. In conclusion, the proposed bottoming method is expected to be widely used as a practical method of reducing springback in industry.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.98-105
• /
• 2015

We investigated the effects of a mutan (water-insoluble ${\alpha}$-glucans) isolated from Streptococcus mutans on the healing of bone defect in rat. Sprague-Dawley rats were divided into control (saline-treated), lipopolysaccharide (LPS)-treated, and mutan-treated groups (n=6 per group). Experimental bone defects were surgically created with round fissure bur at the buccal surface of the left mandibular. The control groups was administered with saline solution (0.1 ml/100 g), while the LPS and mutan group was given LPS and mutan (1 mg/kg body weight) three times weekly. After 4 weeks the rats were sacrificed, the healing of bone defect was assessed by bone mineral density (BMD) and micro-computed tomography (${\mu}CT$) examination. Percent bone volume (bone volume/tissue volume [BV/TV]), trabecular thickness (Tb.Th), and trabecular number (Tb.N) parameters of ${\mu}CT$ showed higher values in control group than LPS and mutan group. Bone surface/volume ratio (BS/BV), trabecular bone pattern factor (Tb.Pf), and structure model index parameters of ${\mu}CT$ showed higher values in LPS group than mutan group. BMD values of mutan treated-alveolar bones were significantly lower for than that of the LPS group. Therefore, we suggest that mutan, water-insoluble ${\alpha}$-glucans from S. mutans may be induce the induction of periodontal diseases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1540-1547
• /
• 2019

Objective: This study was conducted to evaluate the effects of tannins and cellulase on growth performance, nutrient digestibility, blood profiles, intestinal morphology, and carcass characteristics in Hu sheep. Methods: A total of 48 three-month-old meat Hu sheep ($25.05{\pm}0.9kg$) were blocked based on body weight, and randomly allotted to 4 treatments with 3 replicates of 4 sheep each. The experiment lasted for 80 d, and dietary treatments were as follows: i) CON, control diet; ii) TAN, CON+0.1% tannins; iii) CEL, CON+0.1% cellulase; iv) TAN+CEL, CON+0.1% tannins and 0.1% cellulase. Results: Compared with CON, CEL, and TAN+CEL had greater (p<0.05) final body weight (FBW) and average daily gain but lower (p<0.05) feed conversion ratio, while FBW of TAN+CEL was lower (p<0.05) than that of CEL. The apparent total tract digestibility (ATTD) of dry matter in TAN, CEL, and TAN+CEL groups were higher (p<0.05) than that in CON. CEL and TAN+CEL groups had greater (p<0.05) ATTD of crude fiber compared with TAN and CON, while TAN group had lower (p<0.05) ATTD of crude protein than other treatments. TAN, CEL, and TAN+CEL groups increased (p<0.05) serum globulin and alkaline phosphatase but decreased (p<0.05) albumin/globulin. Serum total protein was greatest for TAN+CEL, intermediate for TAN and CEL and least for CON (p<0.05). TAN+CEL group increased (p<0.05) dressing percentage compared with CON, while the backfat thickness of CEL was lower (p<0.05) than that of CON. The villus height of jejunum and ileum in CEL and TAN+CEL groups were greater (p<0.05) than that in CON, and the crypt depth and villus height: crypt depth of jejunum were increased (p<0.05) in TAN, CEL, and TAN+CEL groups. Conclusion: The addition of tannins and cellulase together promoted nutrient digestion, liver protein synthesis and intestinal development and thus improved growth performance and carcass characteristics.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.181-190
• /
• 2021

In this study, a large-scale levee breach experiment from lateral overflow was conducted to verify the effect of the new reinforcement method applied to the levee's surface. The new method could prevent levee failure and minimize damage caused by overflow in rivers. The levee was designed at the height of 2.5 m, a length of 12 m, and a slope of 1:2. A new material mixed with biopolymer powder, water, weathered granite, and loess in an appropriate ratio was sprayed on the levee body's surface at a thickness of about 5 cm, and vegetation recruitment was also monitored. At the Andong River Experiment Center, a flow (4 ㎥/s) was introduced from the upstream of the A3 channel to induce the lateral overflow. The change of lateral overflow was measured using an acoustic doppler current profiler in the upstream and downstream. Additionally, cameras and drones were used to analyze the process of the levee breach. Also, a new method using 3D point cloud for calculating the surface loss rate of the levee over time was suggested to evaluate the performance of the levee reinforcement method. It was compared to existing method based on image analysis and the result was reasonable. The proposed 3D point cloud methodology could be a solution for evaluating the performance of levee reinforcement methods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.620-631
• /
• 2022

This paper shows the numerical prediction of the change in oil outflow rate according to the orifice shape of a damaged ship by using the computational fluid dynamics (CFD) analysis method. It also provides discharge coefficients for various orifice shapes to be used in theoretical prediction approaches. The oil outflow from the model ship was analyzed using a multiphase flow method under the condition that the Froude and Reynolds number similitudes were satisfied. The present numerical results were verified by comparing them with the available experimental data. Along with the aspect ratio of the orifice and the wall thickness of the cargo tank, the effects of the orifice shapes defined by mathematical figures on the oil outflow were investigated. To consider more realistic situations, the investigation of the ef ect of the crushed iron plate around the damaged part was also included. The numerical results confirmed the change in oil outflow time for various shapes of the damaged part of the oil tank, and discharge coefficients that quantify the viscous effects of those orifice shapes were extracted. To verify the predicted discharge coefficients, they were applied to an oil spill estimation equation. As a result, a good agreement between the CFD and theoretical results was obtained.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.239-246
• /
• 2022

This study was conducted to investigate the effects of dietary γ-aminobutyric acid (GABA) and a probiotic mixture on egg production and quality, blood parameters, and stress levels (corticosterone) in Hy-Line parent stock during summer in Korea. A total of 105 Hy-Line parent stock aged 24 weeks were randomly divided into three groups, each containing thirty-five birds: control, γ-aminobutyric acid (GABA), and probiotics (1 × 10⁸/g Bacillus licheniformis, 1 × 10⁷/g Lactobacillus plantarum, and 1 × 10⁷/g Corynebacterium butyricum). The hens were fed a diet containing 50 ppm GABA or 0.1% probiotics for 6 weeks. Compared with the control group, the hen-day egg production, egg mass, and feed conversion ratio over the total period were significantly higher in the probiotic group (P<0.05). In contrast no significant differences were detected among groups with respect to egg weight, albumen height, Haugh units, yolk color, shell thickness or shell strength. Similarly, no significant difference were observed among groups with regards to biochemical profile (total cholesterol, triglyceride, glucose, total protein, aspartate aminotransferase, alanine aminotransferase, albumin, and inorganic phosphorus). However, compared with the control group, we did detect significant reductions in corticosterone levels in the GABA and probiotics groups (P<0.05). On the basis of our findings in this study, it would appear that dietary GABA and probiotics can alleviate heat stress in Hy-Line parent stock, with probiotics in particular being found to promote significant improvements in the hen-day egg production, egg mass, and feed conversion of laying hens during the summer season in Korea.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.101-115
• /
• 2018

This study was carried out to evaluate the effects of various filter conditions on unconfined aquifer (alluvial aquifer). We made model test device which has filter layer, pumping well and observation well which consist of sand layer and gravel layer to test. Step drawdown test and long term pumping tests were carried out using the device. The permeability characteristics of each test group were confirmed and the optimal yield was calculated. As a result of comparing the optimal yield of double filter and single filter in sand, dual-filter SD-300 was valued at 216.8 % higher final optimal yield than single-filter SS-300. Comparing the dual filter SD-300 and the single filter SS-100 with a thin filter layer, dual-filter SD-300 was valued at 709.2% higher final optimal yield than single-filter SS-300. As a result of analysis of optimal yield change over time, It was confirmed that the ratio of optimal yield of single filter and dual filter increase over time. In order to evaluate the long-term change in water intake efficiency, we considered the point at which the initial optimal yield was reduced by 50%. The dual filter SD-300 is about 351.1% higher than SS-300, which is the same thickness filter, and about 579.0% higher than SS-100. From these results, Assuming that the point at which the initial quantity of water intake is reduced to 50% is the well life, double filters are expected to increase their lifespan by about 3.5 times over single filters of the same thickness and by about 5.8 times over typical single filter. These results can be used to design wells to river bank filtration or filtered seawater. In addition, it is possible to clarify the effect of the double filter through the comparison with the future field test results.