• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.137-147
• /
• 2010

This research was designed to compare the subjective evaluation of texture image and preference by structure and sensible characteristics of women's suits fabrics between on- and off-line. 78 subjects who majored in fashion design evaluated the sensibility image and preference of 15 various kinds of specimens on- and off-line. Factor analysis, t-test, Pearson correlation and regression were used for a statistical analysis by SPSS WIN 13.0. The results of this study were as follows: 1. Women's suits fabrics were classified according to five sensibility image factors: 'classic', 'sophisticated', 'natural', 'characteristic', and 'practical'. 2. The results of the t-test showed that there were no differences between the on- and off-line evaluation of sensibility images. 3. The analysis of correlation indicated that the 'classic'-'sophisticated' and 'natural'- 'practical' sensibility images show a significant correlation between the two kinds of evaluation. 4. The results of regression revealed that 'sophisticated', 'characteristic' and 'practical' sensibility images had an effect on the purchase preference of women's suits fabrics. 5. 'Sophisticated', 'characteristic' and 'classic' sensibility images had an effect on the tactile preference of women's suits fabrics. 6. The structural characteristics of fabrics: thickness, weave and weight had an effect on the 'classic' sensibility image. Thickness had an effect on the 'sophisticated' sensibility image and fabric count had an effect on the 'characteristic' sensibility image.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.79-88
• /
• 1995

The gravity measurment has been carried out at 48 gravity stations with intervals of 1.0~1.5 km along the survey line between Samcheog, Gosari and Taebaek to study subsurface geology and geologic structure in the northeastern part of the Ockchon zone. The Bouguer gravity anomaly values were obtained from the measured gravity values through the gravity corrections. The subsurface geology and geologic structure were interpreted quantitatively by means of the Fourier series method and Talwani method for 2.5 dimensional body. In the study area, the depth of Conrad discontinuity is about 10 km at Samcheog, northeastern end of the survey line, and it is increased rapidly to about 12.5 km at Miro, 15 km at Gosari and 15.5 km at Dongjeom, southwestern end of the survey line, respectively. The depth of the basement of the Ockchon zone exposed at Samcheog is increased smoothly to about 2 km at 5 km from Samcheog along the survey line, and is exposed again in the area between Singiry and Gosari. Beyond Gosari its depth is increased to about 1.7 km, and displaced 2.3 km downward by Osipcheon fault near Dogyeri and 0.5 km by Baeksan thrust near Cheolam, respectively. Many V-shaped low Bouguer gravity anomalies resulted from the fracture zone associated with faults imply the existence of Osipcheon fault and several inferred faults. The low Bouguer gravity anomaly zone between Tongdong and Dongjeom is caused by Jurassic gneissose granite. A local high Bouguer gravity anomaly at 35 km along the survey line from Samcheog is interpreted by the effect of iron deposit of high density existed at subsurface. The thickness of Great Limestone Group varies from 0.5 km to 1.4 km, that of Pyeongan Supergroup from 0.4 km to 0.9 km, and that of Yangdeog Group is about 0.3 km. The thickness of Jurassic gneissose granite varies from 1.5 to 3.0 km.

• Journal of Periodontal and Implant Science
• /
• v.51 no.2
• /
• pp.88-99
• /
• 2021

Purpose: Direct intraoral scanning and superimposing methods have recently been applied to measure the dimensions of periodontal tissues. The aim of this study was to analyze various correlations between labial gingival thickness and underlying alveolar bone thickness, as well as clinical parameters among 3 tooth types (central incisors, lateral incisors, and canines) using a digital method. Methods: In 20 periodontally healthy subjects, cone-beam computed tomography images and intraoral scanned files were obtained. Measurements of labial alveolar bone and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0-5 mm from the alveolar crest on the superimposed images. Clinical parameters including the crown width/crown length ratio, keratinized gingival width, gingival scallop, and transparency of the periodontal probe through the gingival sulcus were examined. Results: Gingival thickness at the alveolar crest level was positively correlated with the thickness of the alveolar bone plate (P<0.05). The central incisors revealed a strong correlation between labial alveolar bone thickness at 1 and 2 mm, respectively, inferior to the alveolar crest and the thickness of the gingiva at the alveolar crest line (G0), whereas G0 and labial bone thickness at every level were positively correlated in the lateral incisors and canines. No significant correlations were found between clinical parameters and hard or soft tissue thickness. Conclusions: Gingival thickness at the alveolar crest level revealed a positive correlation with labial alveolar bone thickness, although this correlation at identical depth levels was not significant. Gingival thickness, at or under the alveolar crest level, was not associated with the clinical parameters of the gingival features, such as the crown form, gingival scallop, or keratinized gingival width.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.634-640
• /
• 2009

The plate manufacturing processes are composed of the reheating furnace, finishing mill, cooling process and hot leveling. The finishing rolling mill (FM) as a reversing mill has produced the plate steel through multiple pass rolling. The automatic gauge control (AGC) is employed to maintain the thickness tolerance. The high grade products are forming greater parts of the manufacturing and customers are requiring strict thickness margin. For this reason, the advanced AGC method is required instead of the conventional AGC based on the PI control. To overcome the slow response performance of the conventional AGC and the thickness measurement delay, a fuzzy AGC based on the thickness deviation and its trend is proposed in this paper. An embedded controller with the fuzzy AGC has been developed and implemented at the plate mill in POSCO. The fuzzy AGC has dynamically controlled the roll gap in real time with the programmable logic controller (PLC). On line tests have been performed for the general and TMCP products. As the results, the thickness deviation range (maximum - minimum of the inner plate) is averagely from 0.3 to 0.1 mm over the full length. The fuzzy AGC has improved thickness deviation and completely satisfied customer needs.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.47-55
• /
• 2020

In this case study, the brake line failure of air over hydraulic(AOH) brake system is described. AOH brake system is applied to commercial vehicles between 5 to 8 tons. It consists of a hydraulic system using compressed air and operates the air master to form hydraulic pressure to transfer braking power to the wheels. When the brake lines of the system applied to vehicles with high load capacity are damaged, the braking force of one shaft is lost, and the braking distance increases rapidly, leading to a big accident. Failure of the brake line occurs due to various causes such as road surface fragmentation, corrosion of the line, and aged deterioration of air brake hose. The braking force could be decreased even when a very small break in the form of a pin-hole occurs. However, it is difficult to find a part where the thickness of the line is thin due to stone pecking or corrosion generated in the pin-hole formed on the brake line located under the lower part of the vehicle by the sensory evaluation or the conventional braking force test. Accordingly, it is necessary to analyze the condition and cause of the failure of the brake line more precisely when the accident investigation of the heavy vehicles, and also to examine the necessity of the advanced test for the aged brake line.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.1-8
• /
• 2000

In this paper, design of sense amplifier for a flash memory minimizing bit line disturbance due to common bit line is presented. There is a disturbance problem at output modes by using common bit line, when the external devices access an internal flash memory. This phenomenon is resulted form hot carrier between floating gates and bit lines by thin oxide thickness. To minimize bit line disturbance, lower it line voltage is required and need sense amplifier to detect data existence in lower bit line voltage. Proposed circuits is operated at lower bit line voltage and we fabricated a embedded flash memory MCU using 0.6u technology.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.110-120
• /
• 1998

Tailor-welded blanks are made of two or more different blanks in thickness or material. So car body with tailor-welded blanks need not reinforcement panels. However in order to make stamping tools for tailor-welded blanks, die engineers should know about the exact position of the welding line after the part is drawn. The necessity of knowledge about the position of welding line needs forming simulation methodology as a prior step in tooling. Therefor some parts of the simulation methodology are proposed and compared with the experimental results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.111-118
• /
• 1999

In this paper, linearized dynamic characteristics of parallel line pivoted pad thrust bearing(hereinafter refer to PLP thrust bearing) was analyzed by perturbation method with inlet pressure. Inlet pressure and excitation frequency irfluence dynamic characteristics of PLP thrust bearing at all operating condition, such as angular pivot position, mass of pad. Therefore, the characteristics is have to analyzed with inlet pressure, excitation frequency, mass of pad and thickness of pad. Otherwise, the analysis is able to estimate the characteristics over or under.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.267-270
• /
• 2005

An RFID patch antenna for metallic object has been designed. The effects of variation of distance between the tag antenna and ground of the antenna have been studied. Various dielectric constants, thickness, permittivity, width of transmission line and length of transmission line have been used to design the better tag antenna for metallic object.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.337-342
• /
• 1998

In this paper the lubrication performances of line pivoted pad thrust bearing and point pivoted pad thrust bearing are studied by a numerical analysis. The running characteristic parameters such as nondimensional load carrying capacity nondimensional friciton power loss nondimensional flow rate and film thickness ratios are calculated for various circumferential pivot positions. The results provide a usdful data for the selection of pivot position in a pivoted and thrust bearing.