• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권3호
• /
• pp.366-370
• /
• 2010

본 논문에서는 한 장의 2-D 이미지를 입력으로 받아 자동적으로 동양화처럼 보이는 그림으로 바꾸어 주는 비 사실적 랜더링(NPR) 시스템을 제안한다. 동양화의 선은 두께가 다양하고 끝이 갈라지는 특성이 있고, 농담의 변화를 주어 대상 물체의 입체감을 표현하는 경향이 있다. 본 논문에서는 이미지의 외곽선 추출을 바탕으로 curvature를 사용하여 선을 따라 변하는 두께를 가진 선을 생성한다. 또한 기존에 수채화 스타일에서 제안된 농담 표현방법과는 반대로 지역적인 세부표현을 증가시키고 광역적인 농담을 줄여준다. 본 논문은 외곽선 추출, 선 그리기를 통하여 다양한 두께의 선을 표현해 주는 방법과, 이미지의 필터링과 intensity 변환을 통한 농담을 표현하는 일련의 연속적인 방법을 제안하다.

• Carbon letters
• /
• 제9권2호
• /
• pp.105-107
• /
• 2008

In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.784-792
• /
• 2018

In this letter, a standard deviation based optimization technique has been applied on High Resolution X-ray Diffraction symmetric and asymmetric scan results to accurately determine the Aluminum molar fraction and lattice relaxation of Molecular Beam Epitaxy grown compositionally graded Aluminum Gallium Nitride (AlGaN)/Aluminum Nitride/Gallium Nitride (GaN) heterostructures. Mathews-Blakeslee critical thickness model has been applied in an alternative way to determine the partially relaxed AlGaN epilayer thicknesses. The coupling coefficient determination has been presented in a different perspective involving sample tilt method by off set between the asymmetric planes of GaN and AlGaN. Sample tilt is further increased to determine mosaic tilt ranging between $0.01^{\circ}$ and $0.1^{\circ}$.

• Carbon letters
• /
• 제14권4호
• /
• pp.243-246
• /
• 2013

In this work, electroless Ni-plating on polyethylene terephthalate (PET) ultra-fine fibers surfaces was carried out to improve the electric conductivity of the fiber. The surface properties of PET ultra-fine fibers were characterized using scanning electron microscopy, X-ray diffraction, and contact angle analyses. The electric conductivity of the fibers was measured using a 4-point testing method. The experimental results revealed the presence of island-like nickel clusters on the PET ultra-fine fibers surfaces in the initial plating state, and the electric conductivity of the Ni-plated fibers was enhanced with increasing plating time and thickness of the Ni-layers on the PET ultra-fine fibers.

• 한국표면공학회지
• /
• 제55권4호
• /
• pp.187-195
• /
• 2022

WO₃ thin films were synthesized by electrodeposition, and their electrochromic properties were investigated. The application of static voltage produced WO₃ films with a smooth, compact surface morphology, and the film thickness linearly increased with the application time. The thicker film showed a strong color contrast but a slow color-switching speed. High-temperature heat treatment exceeding 300 ℃ induced a phase transformation from an amorphous to a monoclinic structure and resulted in degraded electrochromic performance. Furthermore, the optimized WO₃ thin films demonstrated their potential application as electrochromic boards for writing and erasing letters using a simple modified 3D printer in a rapid, accurate process

• 대한의생명과학회지
• /
• 제7권1호
• /
• pp.17-25
• /
• 2001

This study was performed to assess the effects of exogenous collagen gel for the re-epithelialization of partial thickness skin wound healing in rabbits. Adult male rabbits (New Zealand White Rabbit) 1.5~2 kg, were used for experimental animals. Skin wounds (1.5$\times$2 cm length) were created bilaterally on the flank of 10 rabbits and then treated a periods of 9 days. Wounds on the experimental site were treated with exogenous collagen gel as well as fabric material gauze dressing. Control site wounds were covered with fabric material gauze dressing alone. Histological findings indicated that the epithelial migration of the experimental site of rabbits was far more rapid than that in the other control wound sites. Moreover, exogenous collagen gel provided a moist environment to keep wound clean, and facilitate keratinocyte proliferation. The wound dressed with exogenous collagen gel demonstrated a significant increase in the healing rate and re-epithelialization.

• Carbon letters
• /
• 제7권4호
• /
• pp.271-276
• /
• 2006

Porous carbon materials were prepared with a thermal treatment of coal tar pitch at 550 in the Ar gas. Growth, merger, and distribution of pore were characterized with scanning electron microscopy as variation ascending temperature gradient and chamber pressure. After graphitizing at the 2600 (1 hr.), walls and connecting parts between pores were investigated with X-ray diffraction patterns. Wall thickness and pore size decreases as increasing ascending temperature gradient, and pore size becomes homogeneous. Graphite quality and thermal conductivity become higher due to the enhanced orientation of walls and connecting parts between pores.

• Carbon letters
• /
• 제14권2호
• /
• pp.63-75
• /
• 2013

Graphene, a carbon crystal sheet of molecular thickness, shows diverse and exceptional properties ranging from electrical and thermal conductivities, to optical and mechanical qualities. Thus, its potential applications include not only physicochemical materials but also extends to biological uses. Here, we review recent experimental studies about graphene for such bioapplications. As a prerequisite to the search to determine the potential of graphene for bioapplications, the essential qualities of graphene that support biocompatibility, were briefly summarized. Then, direct examples of tissue regeneration and tissue engineering utilizing graphenes, were discussed, including uses for cell scaffolds, cell modulating interfaces, drug delivery, and neural interfaces.

• Carbon letters
• /
• 제4권1호
• /
• pp.10-13
• /
• 2003

The structural studies of amorphous isotropic carbon prepared from pyrolysis of phenol formaldehyde resin have been carried out using X-ray diffraction. X-ray diffraction from as prepared sample at $1000^{\circ}C$ and a sample treated at $1900^{\circ}C$ revealed that both are amorphous even though there are small differences in short range order. It is found that both are graphite like carbon (GLC) with predominantly $sp^2$ hybridization. Small angle X-ray scattering results show that as prepared sample mainly consists of thin two dimensional platelets of graphitic carbon whereas they grow in thickness to become three dimensional materials of nano dimensions.

• 대한인간공학회지
• /
• 제28권4호
• /
• pp.1-7
• /
• 2009

The purpose of this study was to evaluate the legibility of one-syllable Korean characters with the participation of sixteen subjects. The experiment considered nine factors including age (young and old), gender (male and female), illuminance (150lx and 600lx), viewing distance (50cm and 200cm), material type (paper and LCD), typeface (Ming and Gothic), thickness (plain and bold), color contrast (black letter/white background and white letter/black background), and complexity (simple, complex, and number) to examine main effects with a $2^{6-3}\times3$ fractional factorial design. The dependent variables were minimum character size of 100% correctness, maximum character size of 0% correctness, and minimum character size of comfortable reading preference. The results of analysis of variance (ANOVA) revealed that age, illuminance, viewing distance and complexity were significant for all dependent variables, except gender which was significant only for the minimum character size of comfortable reading preference. In general, the young could see twofold smaller size letters than the elderly. The subjects could see smaller sized letters with the illuminance of 600lx and viewing distance of 50cm than 150lx and 200cm, respectively and also with numbers, simple characters, and complex characters in that order. The findings of this study could be characterized about the legibility of Korean characters and be good resources for developing its standard.