• 수산해양기술연구
• /
• 제48권1호
• /
• pp.51-58
• /
• 2012

As a basic study to improve hooking ability of long line fishing gear, which is widely used around Jeju-do coast, the researcher performed hooking experiment of parrot fish by manufacturing and installing 7 kinds of model long line fishing gears, whose thickness of branch line are different and 8 kinds of model long line fishing gear, whose length of branch line are different, in indoor circular aquarium, which is installed for the model experiment of thickness and length of branch line that are various by fishing implement and improper. The hooking rate depending on thickness and length of branch line was calculated and the effect of thickness and length of branch line on hooking rate was analyzed. Its results are as follows. When branch line was thin and long, high hooking rate appeared. In the scope of value setting, the relationship between thickness ($B_t$) of branch line and total hooking rate ($Th_r$) can be shown as following formula as. In the scope of value setting, the relationship between length ($B_t$) of branch line and total hooking rate ($B_t$) can be shown as $Th_r=-20.83B_t+26.04$. Through Pearson correlation analysis, the coefficient of correlation between thickness of branch line and hooking rate was -0.718. Therefore it showed significance in 0.01 significance level. Through Pearson correlation analysis, the coefficient of correlation between length of branch line and hooking rate was 0.431. Therefore it showed significance in 0.01 significance level.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.48-59
• /
• 2018

This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.

• 한국정보통신학회논문지
• /
• 제23권6호
• /
• pp.740-747
• /
• 2019

본 논문에서는 WLAN과 WiMAX 대역에서 동작 가능하도록 삼중대역 안테나를 설계 제작 및 측정하였다. 마이크로스트립 선로를 사용하여 급전하였으며 패치면에 두 개의 분기된 선로를, 그리고 접지면에 사각슬릿을 삽입하여 삼중대역 특성을 갖도록 설계하였다. 그리고 임피던스 대역폭의 특성을 개선하기 위해 접지면에 수직 스트립 선로를 추가하였다. 제안된 안테나는 유전율 4.4 그리고 두께 1.0mm인 유전체 기판 위에 $18.0mm(W1){\times}37.3mm$ (L4+L5+L7) 의 크기로 설계되었다. 제작 및 측정 결과로부터 2.4/2.5 GHz에서는 480 MHz (2.32~2.80 GHz), 3.5 GHz 대역에서는 810 MHz (3.22 ~ 4.03 GHz), 그리고 5.0 GHz 대역에서는 1,820 MHz (5.05 ~ 6.87 GHz)의 대역폭을 얻었다. 또한 측정된 3D 방사패턴을 제시하였으며 요구되는 주파수 대역에서 측정된 이득값을 제시하였다.

• PNF and Movement
• /
• 제17권1호
• /
• pp.1-9
• /
• 2019

Purpose: This study investigates the effects of task-oriented training for a left trunk flexion pattern using real-time ultrasound imaging in a stroke patient with unilateral neglect symptoms. Methods: This study used the ABA experimental design, which is a single-subject research method among individual case research methods. For the ABA experimental design, changes in the degree of unilateral neglect, balance ability, and the thickness of the lateral abdominal muscle were visually analyzed during the baseline process, in the intervention period, and after the intervention. The experiments were performed 24 times in total for 8 times in each of the 3 periods. The unilateral neglect was measured using the Albert test, balance ability was measured using the Berg balance test, and the thickness of the lateral abdominal muscle was measured using ultrasound imaging. The subject was a 50-year-old male patient with unilateral neglect caused by right cerebral hemorrhage. He performed task-oriented training for a voluntary left trunk flexion pattern using real-time ultrasound imaging during the intervention period. Results: The result of comparing the data collected during the intervention period with the data point average of the baseline process showed that balance ability improved and the tendency line was above the baseline. The tendency line of unilateral neglect was below the baseline and showed a decreasing tendency. The thickness of the lateral abdominal muscle showed an increasing trend and the tendency line was above the baseline. Conclusion: The results of this study suggest that the task-oriented training for left trunk flexion pattern using real-time ultrasound imaging has a beneficial effect on balance ability, the degree of unilateral neglect, and the strength of the lateral abdominal muscle in unilateral neglect patients.

• 한국강구조학회 논문집
• /
• 제14권2호
• /
• pp.311-318
• /
• 2002

본 논문은 냉간성형 각형강관 T형 접합부의 최대내력과 변형제한치에 대한 연구이다. 전회의 실험적 연구로부터, T형 접합부는 주관폭에 대한 지관폭의 비(${\beta}$) 0.8이하의 범위에서 변형의 증가와 함께 내력이 계속적으로 증가하는 양상을 나타내었다. 따라서, 일정한 변형량(주관플랜지에서의 변위)에 대응하는 하중을 T형 접합부의 최대내력으로 정의할 수 있을 것이다. 폭비(${\beta}$)와 주관 두께에 대한 폭의 비(B/T)가 주관 플랜지 파괴모드에 미치는 영향을 검토하였다. 기존의 Kato에 의해 수행된 실험을 포함한 실험결과로부터 $16.7{\leq}B/T{\leq}41.6$ 이고 $0.27{\leq}{\beta}{\leq}0.8$ 인 범위의 T형 접합부에 대하여, 최대내력을 정의를 위한 변형제한치는 주관폭의 3% 변형량(3%B)으로 제안하였다. CIDECT의 설계식 및 기존의 제안내력식과 실험결과를 비교하였고, 최종적으로 항복선이론에 근거한 내력식을 제안하였다.

• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.649-662
• /
• 2018

In this study, based on the three-dimensional theory of elasticity, free vibration characteristics of sandwich sectorial plates with multiwalled carbon nanotube-(MWCNT)-reinforced composite core are considered. Modified Halpin-Tsai equation is used to evaluate the Young's modulus of the MWCNT/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. The exponential shape factor modifies the Halpin-Tsai equation from expressing a straight line to a nonlinear one in the MWCNTs wt% range considered. In this paper, free vibration of thick functionally graded sandwich annular sectorial plates with simply supported radial edges and different circular edge conditions including simply supported-clamped, clamped-clamped, and free-clamped is investigated. A semi-analytical approach composed of two-dimensional differential quadrature method and series solution are adopted to solve the equations of motion. The material properties change continuously through the core thickness of the plate, which can vary according to a power-law, exponentially, or any other formulations in this direction. This study serves as a benchmark for assessing the validity of numerical methods or two-dimensional theories used to analysis of laminated sectorial plates.

• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.347-360
• /
• 2017

The goal of this study is to fill this apparent gap in the area about vibration analysis of multiwalled carbon nanotubes (MWCNTs) curved panels by providing 3-D vibration analysis results for functionally graded multiwalled carbon nanotubes (FG-MWCNTs) sandwich structure with power-law distribution of nanotube. The effective material properties of the FG-MWCNT structures are estimated using a modified Halpin-Tsai equation. Modified Halpin-Tsai equation was used to evaluate the Young's modulus of MWCNT/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. The exponential shape factor modifies the Halpin-Tsai equation from expressing a straight line to a nonlinear one in the MWCNTs wt% range considered. Also, the mass density and Poisson's ratio of the MWCNT/phenolic composite are considered based on the rule of mixtures. Parametric studies are carried out to highlight the influence of MWCNT volume fraction in the thickness, different types of CNT distribution, boundary conditions and geometrical parameters on vibrational behavior of FG-MWCNT thick curved panels. Because of using two-dimensional generalized differential quadrature method, the present approach makes possible vibration analysis of cylindrical panels with two opposite axial edges simply supported and arbitrary boundary conditions including Free, Simply supported and Clamped at the curved edges. For an overall comprehension on 3-D vibration analysis of sandwich panel, some mode shape contour plots are reported in this research work.

• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.451-459
• /
• 2009

본 논문은 냉간성형 각형강관 T형 접합부의 면내 휨모멘트를 평가하는데 목적이 있다. 이전 연구로부터, 주관 폭에 대한 지관 폭의 비가 0.71이하인 T형 접합부는 뚜렷한 최대 휨강도를 나타내지 못하는 접합부의 파괴모드는 주관 플랜지의 휨파괴이다. Zhao에 의해 수행된 실험을 포함한 결과로부터 주관 폭두께비는 ${16.7{\leq}2{\gamma}(=B/T){\leq}33}$이고, 주관 폭에 대한 지관 폭의 비인 폭비는 ${0.34{\leq}{\beta}(=b_{1}/B){\leq}0.71}$의 범위인 냉간성형 각형강관 T형 접합부에 대한 최대 휨강도 정의를 위한 변형제한치는 주관폭(B)의 1% 변형이며, 최대 휨강도는 1.5M1%B로 정의할 수 있다. 기본형에 대한 항복선 모델과 기존 연구자들에 의해 수정 제안된 항복선 모델식을 검토하여 실험결과와 비교한 결과, Zhao의 제안식이 가장 좋은 대응도와 분포도를 보였다. 따라서, 각형강관 T형 접합부에 대한 면내 설계 휨강도식으로 Zhao가 수정 제안한 항복선 모델식을 적용하는 것이 가장 합리적인 것으로 생각된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.21-21
• /
• 2017

Severe lodging has recurrently occurred at strong typhoon's hitting in recent climate change. The identification of quantitative trait loci (QTLs) and their responsible genes associated with a strong culm and their pyramiding are important for developing high-yielding varieties with a superior lodging resistance. To identify QTLs for lodging resistance, the tropical japonica line, Chugoku 117 and the improved indica variety, Habataki were selected as the donor parent, as these had thick and strong culms compared with the temperate japonica varieties in Japan such as Koshihikari. By using chromosome segment substitution lines (CSSLs) in which chromosome segments from the japonica variety were replaced to them from Habataki, we identified the QTLs for strong culm on chrs. 1 and 6, which were designated as STRONG CULM1 (SCM1) and STRONG CULM2 (SCM2), respectively. By using recombinant inbred lines (BILs) derived from a cross between Chugoku 117 and Koshihikari and introgression lines, we also identified the other QTLs for strong culm on chrs. 3 and 2, which were designated as STRONG CULM3 (SCM3) and STRONG CULM4 (SCM4), respectively. Candidate region of SCM1 includes Gn1 related to grain number. SCM2 was identical to APO1, a gene related to the control of panicle branch number, and SCM3 was identical to FC1, a strigolactone signaling associated gene, by performing fine mapping and positional cloning of these genes. To evaluate the effects of SCM1~SCM4 on lodging resistance, the Koshihiakri near isogenic line (NIL) with the introgressed SCM1 or SCM2 locus of Habataki (NIL-SCM1, NIL-SCM2) and the another Koshihikari NIL with the introgeressed SCM3 or SCM4 locus of Chugoku 117 (NIL-SCM3, NIL-SCM4) were developed. Then, we developed the pyramiding lines with double or triple combinations derived from step-by-step crosses among NIL-SCM1 NIL-SCM4. Triple pyramiding lines (NIL-SCM1+2+3, ~ NIL-SCM1+3+4) showed the largest culm diameter and the highest culm strength among the combinations and increased spikelet number due to the pleiotropic effects of these genes. Pyramiding of strong culm genes resulted in much increased culm thickness, culm strength and spikelet number due to their additive effect. SCM1 mainly contributed to enhance their pyramiding effect. These results in this study suggest the importance of identifying the combinations of superior alleles of strong culm genes among natural variation and pyramiding these genes for improving high-yielding varieties with a superior lodging resistance.

• 한국산림과학회지
• /
• 제34권1호
• /
• pp.1-14
• /
• 1977

지리산(智異山) 일대(一帶)에 생육(生育)되고 있는 잣나무집단(集團)의 변이(變異)를 구명(究明)하기 위해 수형(樹形), 침엽(針葉), 자엽(子葉), 종자(種子), 묘목성장(苗木成長)의 특성(特性)을 조사하였다. 두개 집단(集團)을 비교(比較) 검토(檢討)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 침엽(針葉)의 엽장(葉長), 거치밀도(鋸齒密度), 종자충실율(種子充實率), 종자장(種子長), 종자후(種子厚), 자엽장(子葉長), 자엽폭(子葉幅), 자엽(子葉)의 기공선수(氣孔線數)와 묘고성장(苗高成長)에 있어서는 집단(集團), 개체간(個體間)에 유의차(有意差)를 인정(認定)할 수 있었다. 2. 수목(樹木)의 역지각(力枝角)과 목재(木材)의 비중(比重), 자엽(子葉)의 수지구수(樹脂溝數)의 형질(形質)에 있어서는 집단간(集團間)에 유의차(有意差)가 인정(認定)되었다. 3. 침엽(針葉)의 기공선수(氣孔線數), 종자폭(種子幅), 종자중량(種子重量), 자엽(子葉)의 거치밀도(鋸齒密度), 자엽수(子葉數)의 형질(形質)은 개체간(個體間)에 유의차(有意差)를 인정(認定)할 수 있었다. 4. 침엽(針葉)의 수지구(樹脂溝)는 집단(集團), 개체간(個體間) 모두 3개(個)의 주수지구(主樹脂溝)만 발달(發達)하여 변이폭(變異幅)은 인정(認定)할 수 없었다. 그리고 수간형(樹幹型)은 두 집단(集團) 모두 통직성(通直性)을 나타내었다. 5. 침엽(針葉)과 자엽(子葉) 형질(形質)의 변이계수(變異係數)는 대체로 자엽(子葉)의 것이 큰 경향(傾向)을 나타내었다.