• 제목/요약/키워드: Thickness Ratio

검색결과 3,803건 처리시간 0.029초

파티클보드의 밀도경사와 흡음성 개선을 위한 열압기술 (Hot Pressing Technology for Improvement of Density Profile and Sound Absorption Capability of Particleboard)

  • 박희준;김현중
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권1호
    • /
    • pp.25-33
    • /
    • 2002
  • 파티클보드의 두께방향으로 밀도경사와 흡음성 개선을 위한 새로운 열압방식개발을 위하여 본 과제를 수행하였다. 적용한 열압방식으로는 기존의 평판가열식 열압방식(A-type pressing), 성형장치내 열압방식(B-type pressing), 그리고 성형장치내 요철카울을 설치한 열압방식(C-type pressing)을 적용하였다. 원료목질은 낙엽송 세이빙을 사용하였으며, 접착제로는 수용성 페놀-포름알데하이드 접착제를 사용하였다. 흡음성 개선을 위한 보드는 열압시 요철카울에 의하여 보드 이면에 계단형 공극을 생성하였다. 열압방식별 제조된 보드의 물리적 및 기계적 성질을 측정하였는 바, 성형장치내 열압을 함으로써 강도적 성능을 향상시킬 수 있는 것으로 나타났으며, 보드의 두께방향 밀도경사 역시 평균밀도에 대한 최소밀도의 비율이 90% 이상을 나타내어 기존의 평판가열식으로 제조한 보드 보다 크게 개선시킬 수 있는 것으로 나타났다. 또한 열압시 요철카울에 의하여 천공을 해 줌으로써 파티클보드의 흡음계수를 향상시킬 수 있는 것으로 나타남으로써 향후 저밀도 후판보드 제조가능성과 흡음재 등 새로운 건축내장재료로의 사용가능성을 확인하였다.

초소형 드론 탑재용 GPS 대역 마이크로스트립 안테나의 소형화 (Miniaturization of GPS Microstrip Antenna for Small Drone)

  • 김완기;우종명
    • 한국ITS학회 논문지
    • /
    • 제21권3호
    • /
    • pp.62-72
    • /
    • 2022
  • 본 논문에서는 초소형 드론에 탑재가 가능하도록 소형화한 GPS 대역(L1 대역 중심 주파수 : 1.575 GHz) 안테나를 제안하였다. 소형화는 λ/4 마이크로스트립 안테나를 기저로 섭동법을 적용시키고, 패치 가장자리의 전류 길이를 길게 하는 개념으로 실현시켰다. 제안된 안테나는 10 mm × 9 mm × 10 mm(0.05 λ × 0.05 λ × 0.05 λ) 크기의 스티로폼(εr=1.06, 두께=10 mm) 표면에 장착 가능한 인쇄형으로 제작하였다. 임피던스 매칭을 위해 급전 선로의 두께 및 길이, 단락 스터브 간의 간격을 조절하였으며, 그 결과, 제작된 안테나는 중심주파수 1.575 GHz에서 S11은 -38.6 dB를 얻었으며, 방사 패턴 측정 결과, 0° 방향에서 xz-plane의 Eθ 성분 이득 1.87 dBi, yz-plane의 Eθ 성분 이득 -1.7 dBi의 특성을 얻었다. 결과적으로, λ/2 마이크로스트립 패치 안테나와 비교하여 98.8 %의 체적 축소율을 확보함으로써, 초소형 드론에 탑재가 가능한 GPS 안테나로써 활용이 가능함을 제시하였다.

KIM-112 처리가 벼 도복관련형질에 미치는 영향 (Lodging Related Traits of Rice Plants as Affected by ′KIM -112′ Application)

  • 최충돈;김순철;이수관
    • 한국작물학회지
    • /
    • 제35권3호
    • /
    • pp.218-223
    • /
    • 1990
  • 벼 기계이항답에서 후기의 도복을 경감시켜 농작업의 효율성을 높이고 수량손실을 방지하기 위하여 개발중인 도복경감제 'KIM-112'의 효과를 검토하고자 처리시기 및 약량을 달리하여 수행한 시험결과를 요약하면 다음과 같다. 1. KIM-112의 출수전 30일-5일 처리는 간장을 크게 단축시켰는데 10a당 1g 처리에서는 처리시기에 따라 10-17%, 2g 처리에서는 16-23%의 간장단축효과가 있었다. 2. 절간장 단축정도는 처리시기에 따라 다르게 나타났는데 출수전 30일 처리에서는 5절간이 약 50%정도 단축되었으며 처리시기가 늦어질수록 상위절간의 단축이 커지는 경향이었고, 약량별로는 2g 처리가 다소 높았다. 3. 간장과 도복지수와는 간장이 길어질수록 도복지수가 높아지는 정의 관계가 있었으며, 특히 1절간장과 4절간장이 도복지수에 크게 영향을 미쳤다. 4. KIM-112는 간벽 간경 간기중 등의 도복형질에는 영향을 미치지 않았고, 좌절중의 증대와 간장단축에 따른 moment의 감소로 내도복성을 향상시켰으며, 도복지수는 좌절중 moment 이삭중과 높은 상관이 있었다. 5. 약제처리시기와 약량에 따라 출수가 1-4일 지연되었으며, 수장이 짧아짐에 따라 수당립수가 다소 적었으나 도복이 되지 않아 등숙율의 향상으로 수량은 약간 증수되었다.

  • PDF

Evaluation of the clinical and radiographic effectiveness of treating peri-implant bone defects with a new biphasic calcium phosphate bone graft: a prospective, multicenter randomized controlled trial

  • Jae-Hong Lee;Hyun-wook An;Jae-Seung Im;Woo-Joo Kim;Dong-Won Lee ;Jeong-Ho Yun
    • Journal of Periodontal and Implant Science
    • /
    • 제53권4호
    • /
    • pp.306-317
    • /
    • 2023
  • Purpose: Biphasic calcium phosphate (BCP), a widely used biomaterial for bone regeneration, contains synthetic hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), the ratio of which can be adjusted to modulate the rate of degradation. The aim of this study was to evaluate the clinical and radiographic benefits of reconstructing peri-implant bone defects with a newly developed BCP consisting of 60% β-TCP and 40% HA compared to demineralized bovine bone mineral (DBBM). Methods: This prospective, multicenter, parallel, single-blind randomized controlled trial was conducted at the periodontology departments of 3 different dental hospitals. Changes in clinical (defect width and height) and radiographic (augmented horizontal bone thickness) parameters were measured between implant surgery with guided bone regeneration (GBR) and re-entry surgery. Postoperative discomfort (severity and duration of pain and swelling) and early soft-tissue wound healing (dehiscence and inflammation) were also assessed. Data were compared between the BCP (test) and DBBM (control) groups using the independent t-test and the χ2 test. Results: Of the 53 cases included, 27 were in the test group and 26 were in the control group. After a healing period of 18 weeks, the full and mean resolution of buccal dehiscence defects were 59.3% (n=16) and 71.3% in the test group and 42.3% (n=11) and 57.9% in the control group, respectively. There were no significant differences between the groups in terms of the change in mean horizontal bone augmentation (test group: -0.50±0.66 mm vs. control groups: -0.66±0.83 mm, P=0.133), postoperative discomfort, or early wound healing. No adverse or fatal complications occurred in either group. Conclusions: The GBR procedure with the newly developed BCP showed favorable clinical, radiographic, postoperative discomfort-related, and early wound healing outcomes for peri-implant dehiscence defects that were similar to those for DBBM.

벼 직파재배 유형에 따른 생육 및 수량 (Growth and Grain Yield under Different Direct Seeding Cultures in Rice)

  • 최원영;김상수;신현탁;조수연;최선영
    • 한국작물학회지
    • /
    • 제42권1호
    • /
    • pp.14-21
    • /
    • 1997
  • 본 시험은 직파재배 유형에 따른 생육 및 수량을 밝히고자 동벼와 농안벼를 공시하여 수행하였던 바 그 결과를 요약하면 다음과 같다. 1. 직파재배 유형간 입수수는 건답평면세조파에서 가장 많았고 무논골뿌림재배에서 적었다. 2. 초기의 경수 증가 속도는 어린모 기계이앙재배가 빨랐으며 유교경비율은 직파재배가 이앙재배보다 낮았다. 3. 출수일수는 직파재배가 어린모 기계이앙재배보다 동진벼는 2∼13일, 농안벼는 10∼18일 길었다. 4. 뿌리의 표층 분포 비율은 담수표면산파>담수표면조파>무논골뿌림>건답평면세 조파>어린모 기계이앙재배 순으로 높았다. 5. 제4절간의 굵기는 재배유형간에 차이가 없었으며 제4절간의 간벽두께는 어린모 기계 이앙재배가 직파재배보다 두꺼웠고 줄기 매몰깊이는 어린모 기계이앙>건답평면세 조파>무논골뿌림>담수표면 조파>담수표면산파 순으로 깊었다. 6. 중심고는 직파재배가 어린모 기계이앙재배보다 높았고 모멘트는 어린모 기계이앙재배가 낮았으며 도복지수는 어린모 기계이앙재배가 가장 낮았고 무논골뿌림, 건답평면세 조파, 담수표면조파, 담수표면산파 순으로 낮았다. 7. 도복은 농안벼에서는 발생하지 않았거나 매우 경미하였으나 동진벼는 담수표면직파>담수표면조파>무논골뿌림>건답직파=어린모 기계이앙의 순으로 도복발생이 심하였다. 8. 수량 구성요소와 수량성은 품종간에는 유의적인 차이가 인정되었으나, 어린모 기계이앙 재배와 직파재배, 그리고 직파재배와 유형간에는 유의적인 차이가 없었다.

  • PDF

Available phosphorus levels modulate gene expression related to intestinal calcium and phosphorus absorption and bone parameters differently in gilts and barrows

  • Julia Christiane Votterl;Jutamat Klinsoda;Simone Koger;Isabel Hennig-Pauka;Doris Verhovsek;Barbara U. Metzler-Zebeli
    • Animal Bioscience
    • /
    • 제36권5호
    • /
    • pp.740-752
    • /
    • 2023
  • Objective: Dietary phytase increases bioavailability of phytate-bound phosphorus (P) in pig nutrition affecting dietary calcium (Ca) to P ratio, intestinal uptake, and systemic utilization of both minerals, which may contribute to improper bone mineralization. We used phytase to assess long-term effects of two dietary available P (aP) levels using a one-phase feeding system on gene expression related to Ca and P homeostasis along the intestinal tract and in the kidney, short-chain fatty acids in stomach, cecum, and colon, serum, and bone parameters in growing gilts and barrows. Methods: Growing pigs (37.9±6.2 kg) had either free access to a diet without (Con; 75 gilts and 69 barrows) or with phytase (650 phytase units; n = 72/diet) for 56 days. Samples of blood, duodenal, jejunal, ileal, cecal, and colonic mucosa and digesta, kidney, and metacarpal bones were collected from 24 pigs (6 gilts and 6 barrows per diet). Results: Phytase decreased daily feed intake and average daily gain, whereas aP intake increased with phytase versus Con diet (p<0.05). Gilts had higher colonic expression of TRPV5, CDH1, CLDN4, ZO1, and OCLN and renal expression of TRPV5 and SLC34A3 compared to barrows (p<0.05). Phytase increased duodenal expression of TRPV5, TRPV6, CALB1, PMCA1b, CDH1, CLDN4, ZO1, and OCLN compared to Con diet (p<0.05). Furthermore, phytase increased expression of SCL34A2 in cecum and of FGF23 and CLDN4 in colon compared to Con diet (p<0.05). Alongside, phytase decreased gastric propionate, cecal valerate, and colonic caproate versus Con diet (p<0.05). Phytase reduced cortical wall thickness and index of metacarpal bones (p<0.05). Conclusion: Gene expression results suggested an intestinal adaptation to increased dietary aP amount by increasing duodenal trans- and paracellular Ca absorption to balance the systemically available Ca and P levels, whereas no adaption of relevant gene expression in kidney occurred. Greater average daily gain in barrows related to higher feed intake.

PET-CT Normalization, Well Counter Correction에 따른 팬텀을 이용한 영상 평가 (Evaluation of Image for Phantom according to Normalization, Well Counter Correction in PET-CT)

  • 이충운;유연욱;문종운;김윤철
    • 핵의학기술
    • /
    • 제27권1호
    • /
    • pp.47-54
    • /
    • 2023
  • Purpose PET-CT imaging require an appropriate quality assurance system to achieve high efficiency and reliability. Quality control is essential for improving the quality of care and patient safety. Currently, there are performance evaluation methods of UN2-1994 and UN2-2001 proposed by NEMA and IEC for PET-CT image evaluation. In this study, we compare phantom images with the same experiments before and after PET-CT 3D normalization and well counter correction and evaluate the usefulness of quality control. Materials and methods Discovery 690 (General Electric Healthcare, USA) PET-CT equiptment was used to perform 3D normalization and well counter correction as recommended by GE Healthcare. Based on the recovery coefficients for the six spheres of the NEMA IEC Body Phantom recommended by the EARL. 20kBq/㎖ of 18F was injected into the sphere of the phantom and 2kBq/㎖ of 18F was injected into the body of phantom. PET-CT scan was performed with a radioacitivity ratio of 10:1. Images were reconstructed by appliying TOF+PSF+TOF, OSEM+PSF, OSEM and Gaussian filter 4.0, 4.5, 5.0, 5.5, 6.0, 6,5 mm with matrix size 128×128, slice thickness 3.75 mm, iteration 2, subset 16 conditions. The PET image was attenuation corrected using the CT images and analyzed using software program AW 4.7 (General Electric Healthcare, USA). The ROI was set to fit 6 spheres in the CT image, RC (Recovery Coefficient) was measured after fusion of PET and CT. Statistical analysis was performed wilcoxon signed rank test using R. Results Overall, after the quality control items were performed, the recovery coefficient of the phantom image increased and measured. Recovery coefficient according to the image reconstruction increased in the order TOF+PSF, TOF, OSEM+PSF, before and after quality control, RCmax increased by OSEM 0.13, OSEM+PSF 0.16, TOF 0.16, TOF+PSF 0.15 and RCmean increased by OSEM 0.09, OSEM+PSF 0.09, TOF 0.106, TOF+PSF 0.10. Both groups showed a statistically significant difference in Wilcoxon signed rank test results (P value<0.001). Conclusion PET-CT system require quality assurance to achieve high efficiency and reliability. Standardized intervals and procedures should be followed for quality control. We hope that this study will be a good opportunity to think about the importance of quality control in PET-CT

  • PDF

Effect of supplementing hydroxy trace minerals (Cu, Zn, and Mn) on egg quality and performance of laying hens under tropical conditions

  • Vasan Palanisamy;Sakthivel PC;Lane Pineda;Yanming Han
    • Animal Bioscience
    • /
    • 제36권11호
    • /
    • pp.1709-1717
    • /
    • 2023
  • Objective: A pivotal study was designed to investigate the effect of Hydroxy (HYC) Cu, Zn, and Mn on egg quality and laying performance of chickens under tropical conditions. Methods: A total of 1,260 Babcock White laying hens (20-wk-old) were randomly assigned to one of 4 treatments with 15 replicates of 21 hens each in a Randomized Complete Block Design. The birds were reared for 16 weeks and were fed the corn-soybean meal diets supplemented with one of the following mineral treatments: T1, inorganic (INO, 15 ppm CuSO4, 80ppm MnSO4 and 80 ppm ZnO); T2, Hydroxy-nutritional level (HYC-Nut, 15 ppm Cu, 80 ppm Mn, 80 ppm Zn from Hydroxy); T3, Hydroxy-Low (HYC-Low, 15 ppm Cu, 60 ppm Mn, 60 ppm Zn from Hydroxy); T4, Hydroxy plus inorganic (HYC+INO, 7.5 ppm HYC Cu+7.5 ppm CuSO4, 40 ppm HYC ZnO+40 ppm ZnSO4, 40 ppm HYC Mn+40 ppm MnSO4). The egg production was recorded daily, while the feed consumption, feed conversion ratio (FCR) and egg mass were determined at the end of each laying period. The egg quality parameters were assayed in eggs collected over 48 h in each laying period. Results: Overall, no significant effect of treatments was observed on percent egg production, egg weight and FCR (p>0.05). Feed intake was significantly lower in birds fed Hydroxy plus inorganic (p<0.05) diet. The supplementation of HYC-Low significantly increased the egg mass compared to the other treatments (p<0.05). HYC supplementation alone or in combination with INO elicited a positive effect on shell thickness, shell weight, shell weight per unit surface area, yolk colour, albumen and yolk index for a certain period (p<0.05), but not throughout the whole laying period. Conclusion: Dietary supplementation of HYC-Low (15-60-60 mg/kg) showed similar effects on production performance and egg quality characteristics in laying hens as compared to 15-80-80 mg/kg of Cu-Zn-Mn from inorganic sources. This indicates that sulphate based inorganic trace minerals can effectively be substituted by lower concentration of hydroxyl minerals.

위상지연 필름을 이용한 가시광 투과율 가변형 스마트윈도우 제작 (Fabrication of Visible Light Transmittance-variable Smart Windows Using Phase Retardation Films)

  • 김일구;양호창;박영민;홍영규;이승현
    • 마이크로전자및패키징학회지
    • /
    • 제29권4호
    • /
    • pp.29-34
    • /
    • 2022
  • 위상지연 필름을 이용하여 가시광선 투과도 제어가 가능한 스마트윈도우 제작 기술을 제안한다. 위상지연 필름의 phase retardation(𝚪)이 𝛑/2(𝚫n·d = 𝛌/4)인 경우 선편광을 원편광으로 변환시켜줄 수 있으며, 서로 다른 배향각도를 갖는 두 장의 𝛌/4 위상지연 필름을 이용하여 광투과 모드(45°/-45°)와 광차단 모드(45°/45°) 제어가 가능한 스마트윈도우를 제작할 수 있다. 본 연구에서는 복굴절 물질인 reactive mesogen (RM)의 두께에 따른 retardation 특성(𝚫n·d)을 평가함으로써 𝚫n·d가 𝛌/4인 위상지연 필름을 제작하였다. 서로 다른 𝚫n·d 값을 갖는 위상지연 필름이 적용된 스마트윈도우의 광차단 특성을 평가한 결과, 𝛌/4 위상지연 필름 기반의 스마트윈도우에서 가장 높은 광차단율(≥20%)을 보였다. 이를 통해 𝚫n·d의 값이 𝛌/4 일 때 위상지연 효과가 가장 높다는 것을 확인하였으며, 𝛌/4 위상지연 필름을 적용하여 150×150 mm2 크기의 스마트윈도우를 구현하였다.

콘크리트 토목구조물 교면용 MMA 도막방수재 및 교면방수 시스템의 개발 연구 (Development and Research of MMA Waterproof Coating and Waterproof System for Concrete Civil Structures)

  • 임철우;지상호;안기원
    • 한국건설순환자원학회논문집
    • /
    • 제12권2호
    • /
    • pp.128-134
    • /
    • 2024
  • 아스팔트계 교면용 방수재료는 방수재 상부에 고온의 아스콘이 타설되는 과정에서 재료가 연질화나 액상화되어 방수층의 불균형 및 두께감소 등이 문제점으로 남아있는 실정이며, 이를 해결하기 위하여 신규 재료의 개발과 도입 등 기존의 재료를 벗어난 해결방안이 요구되고 있다. 따라서 본 연구에서는 교면용 도막방수재의 기본물성을 만족한 MMA 도막방수재를 기준으로 전체 품질기준에 대한 물성을 파악하고 바탕 콘크리트, 방수재 및 포장층이 시스템화 된 상태에서의 품질기준 등을 확인하여 교면에 MMA 도막방수재로써 활용 가능 여부를 확인하였고, 그 결과 MMA 도막방수재는 경질 MMA 수지 : 연질 MMA 수지 : 파우더 = 6 : 34 : 60의 배합비를 통하여 안정적인 토목구조물 교면용 MMA 도막방수재의 적용이 가능할 것으로 판단되며, MMA 도막방수재와 아스콘간의 이질재료의 부착은 경화 특성을 가지는 유화 아스팔트를 활용하여 시공할 경우 국토교통부 '아스팔트 콘크리트 포장 시공 지침(2021.07)'의 최소 품질기준을 만족할 것으로 판단된다.