• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.4
• /
• pp.93-102
• /
• 2022

Purpose : The purpose of this study was to analyze the change in thickness of transvers abdominis, internal oblique, and external oblique when virtual reality based ring fit adventure is applied to young adults in order to investigate the effect of ring fit adventure on core stabilization. Methods : 30 subjects participated in the experiment. Subjects were randomly assigned to two groups. 15 subjects performed ring fit adventure core exercise (experimental group) and 15 subjects bridge and dead bug exercise (control group). The ring fit adventure core exercise program consists of 6 types, 1) bow pull, 2) overhead lunge twist, 3) pendulum bend, 4) seated ring raise, 5) plank, 6) warrior III pose. Each exercise was performed for 5 minutes, for a total of 30 minutes. The bridege and dead bug exercise were performed for 15 minutes each for a total of 30 minutes. All interventions were performed 3 times a week for 4 weeks. Thickness of the abdominal muscles was measured with a ultrasound. The paired t-test was used to compare the thickness of the transverse abdominis, internal oblique, and external oblique before and after intervention, and the comparison between groups was analyzed using the independent t-test. Results : As a result, in the experimental group, thickness of transverse abdominis and internal oblique increased significantly (p<.05), but external oblique decreased significantly (p<.05), and in the control group, thickness of transverse abdominis, internal oblique, and external oblique increased significantly (p<.05). There was a significant difference in external oblique in the difference between groups (p<.05). Conclusion : These study results showed that core exercise using ring fit adventure can reduce external oblique and increased selective muscle activity of transverse abdominis and internal oblique of the deep abdominal muscles, so it is meaningful as an effective intervention for core stabilization.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.84-89
• /
• 2006

This paper presents the thickness effect of hysteresis ring of hysteresis motor using finite element method combined with a vector hysteresis model. From the magnitude and direction of the magnetic field intensity, the magnetization of each ring element is calculated by a vector hysteresis model. The developed torque can be obtained with the vector sum of individual torque of each element on the hysteresis ring. From these calculations, it can be found that the motor torque is not in proportion to the thickness of the ring. As a result, there exists a proper point of thickness and that can be determined using the proposed methoㅇ in this paper.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1170-1176
• /
• 2008

In this study, we propose a new method to control both the beat clarity and beat period in a ring structure. An equivalent ring which satisfies the measured mode condition is determined by using the equivalent ring theory. Theoretical analysis and finite element analysis on the equivalent ring are performed to investigate the effect of the local structural modification on the beat clarity and beat period. Beat clarity and period are improved by attaching asymmetric mass or decreasing local thickness. Through the analysis on the equivalent ring, the proper position and the amount of the local variation are determined to satisfy the required clarity and period condition. All the analysis results are compared and verified by the experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.365-371
• /
• 2008

In this study, beat control method using an equivalent ring model is proposed to control beat period of a slightly asymmetric ring. Slight asymmetry in a ring generates mode pair and the interaction of the mode pair makes beat in vibration and sound. In a ring, as a simplified bell type structure, mode data are measured and an equivalent ring is determined so that the measured mode condition is satisfied. By the finite element analysis on the equivalent ring, changes of mode pair condition are predicted when local mass is attached or the local thickness is decreased. The predicted results are compared with the experimental result and the validity of the proposed method is verified.

• Journal of Drive and Control
• /
• v.10 no.3
• /
• pp.7-13
• /
• 2013

Hydraulic vane pumps are widely used in various hydraulic systems because of its compactness and light weight. It is well known that the vanes and cam ring are separated by very thin liquid films which result in the EHL state. Contrary to the case of cylindrical roller bearings, the inlet and side boundary pressures are much higher than the atmospheric pressure. In this paper, a numerical solution of the EHL of finite line contacts between the cam ring and vane tip with profiled ends is presented. Using a finite difference method with non-uniform grids and the Newton-Raphson method, converged solutions are obtained for moderate load and material parameters. The EHL pressure distribution and film shape are considerably affected by pump delivery pressure and the side boundary condition applied. Both the maximum pressure and the minimum film thickness always occurred near the edge regions. The present results can be used in the design of optimum vane profile in hydraulic vane pump.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1134-1143
• /
• 1994

A study of adiabatic shear band formation and propagation of 4340 steel was done using the stepped speciment which was subjected to high velocity impact. The high velocity impact was performed on compression Hopkinson bar impact machine. After the controlled impact, the specimen was prepared for visual inspection. Numerical simulation was also performed with same geometrical dimension using explicit time integration finite element code. Experimental results were then compared with the numerical prediction. It was found that the numerical prediction is quite accurate, average thickness of adiabatic shear band is about $10{\mu}m$, the macro crack around shoulder is due to folding, and the deformation control ring is effective to freeze the propagation of adiabatic shear band.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.359-360
• /
• 2009

In this study, we propose a practical method to improve the clarity and the period of the beat in a Korean bell. Proper beating in vibration and sound is very important feature in Korean bell. An equivalent ring theory is applied and finite element analysis is performed to determine the condition of the asymmetry of the bell. The clearity and the period of the beat are improved by attaching a counter mass or decreasing local thickness. This paper shows that the improved the attaching a counter mass or decreasing local thickness. This paper of the beat are improved by attaching a counter mass or decreasing local thickness. This paper shows that the amount and position of the local variation for the required beat condition can be predicted by using the equivalent model, The predicted results are verified by the experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.228-229
• /
• 2008

In this study, we propose an effective method to improve the clarity and period of the beat in a ring structure. Ring is an simplified model of a Korean bell, in which beating vibration and sound are very important features. An equivalent ring theory is applied and finite element analysis on the equivalent ring is performed to determine the condition of the asymmetric element for the clear and proper period beat. The clarity and the period of the beat are improved by attacking asymmetric mass and decreasing local thickness. Using the equivalent ring, the amount and position of the local variation for the required beat condition are determined and the results are verified by experiment.

• Smart Structures and Systems
• /
• v.1 no.1
• /
• pp.47-61
• /
• 2005

A ring-shaped lead zirconate titanate (PZT) piezoceramic sensor has been integrated with the Langevin-type piezoceramic driver of an ultrasonic wire-bonding transducer to form a smart transducer for in-situ measurement of three essential bonding parameters: namely, impact force, ultrasonic amplitude and bond time. This sensor has an inner diameter, an outer diameter and a thickness of 12.7 mm, 5.1 mm and 0.6 mm, respectively. It has a specifically designed electrode pattern on the two major surfaces perpendicular to its thickness along which polarization is induced. The process-test results have indicated that the sensor not only is sensitive to excessive impact forces exerted on the devices to be bonded but also can track changes in the ultrasonic amplitude proficiently during bonding. Good correlation between the sensor outputs and the bond quality has been established. This smart transducer has good potential to be used in automatic process-control systems for ultrasonic wire bonding.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.152-157
• /
• 2014

Pro-program function of Pro/E has been utilized to expedite the design process of bellows. Design parameters selected for bellows design are manipulated to obtain the shapes user specified. User-oriented function may automate the bellows design process and this function may enable to reduce the design time remarkably. Generated bellows solid model has been applied to study of design sensitivity and optimum design. Among the selected design parameters, thickness of bellows affects system response most. Control-ring installed bellows may reduce the stress and prove to be an effective element for heavy load. The finite element analysis results combined with 3D model generated by pro-program may provide the feasible design directions to the bellows designer.