• 한국철도학회논문집
• /
• 제20권1호
• /
• pp.85-98
• /
• 2017

일반적으로 철도궤도 상부노반 흙재료는 연속적인 열차의 동적하중을 받게 되어 증가-감소 단계의 응력을 경험하게 된다. 이와 같이 일정한 주기에 따라 반복적으로 재하되는 축차응력(${\sigma}_d$)과 반복재하회수가 증가하게 되어 발생하는 회복변형률(${\varepsilon}_r$)의 비를 이용, 회복탄성계수($M_R$)을 산정할 수 있다. 현재까지 철도궤도하부구조에 적용할 수 있는 통일된 회복탄성계수 측정 시험법이 제시된 바 없어, 본 연구에서는 철도궤도 하부구조에 적용 가능하며, 구속압, 응력조건 및 반복재하회수 등을 종합적으로 고려할 수 있는 반복삼축압축시험에 의한 잠정 회복탄성계수 측정시험법을 제시하였다. 또한 반복삼축압축시험에 의한 잠정 시험법을 통해 산정된 회복탄성계수($M_R$)와 중형공진주시험을 통해 측정한 전단탄성계수(G)와의 상관성분석을 실시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1605-1608
• /
• 2004

Single phase $CuInS_2$ thin film with a highest diffraction peak (112) at a diffraction angle ($2{\theta}$) of 27.7$^{\circ}$ was well made by SEL method at annealing temperature of 250 $^{\circ}C$ and annealing hour of 60 min in vacuum of $10^{-3}$ Torr or in S ambience for an hour. And the peak of diffraction intensity at miller index (112) of $CuInS_2$ thin film annealed in S ambience was shown a little higher about 11 % than in only vacuum. Single phase $CuInS_2$ thin films were appeared from 0.85 to 1.26 of Cu/In composition ratio and sulfur composition ratios of $CuInS_2$ thin films fabricated in S ambience were all over 50 atom%. Also when Cu/In composition ratio was 1.03, $CuInS_2$ thin film with chalcopyrite structure had the highest XRD peak (112). And lattice constant a and grain size of the thin film in S ambience were appeared a little larger than those in only vacuum. The largest lattice constant of a and grain size of $CuInS_2$ thin film in S ambience was 5.63 ${\AA}$ and 1.2 ${\mu}$m respectively. And the films in S ambience were all p-conduction type with resistivities of around $10^{-1}{\Omega}cm$.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2769-2773
• /
• 2013

Red phosphors $Ca_{(1-1.5x)}Eu_xWO_4$ and $Ca_{(1-2x)}Eu^_xNa_xWO_4$ were synthesized with various concentrations x of $Eu^{3+}$ ions by using a solid-state reaction method. The crystal structure of the red phosphors were found to be a tetragonal scheelite structure with space group $I4_1/a$. X-ray diffraction (XRD) results show the (112) main diffraction peak centered at $2{\theta}=28.71^{\circ}$, and indicate that there is no basic structural deformation caused by the vacancies ${V_{Ca}}^{{\prime}{\prime}}$ or the $Eu^{3+}$ (and $Na^+$) ions in the host crystals. Densities of $Ca_{(1-1.5x)}Eu_xWO_4$ were measured on a (helium) gas pycnometer. Comparative results between the experimental and theoretical densities reveal that $Eu^{3+}$ (and $Na^+$) ions replace the $Ca^{2+}$ ions in the host $CaWO_4$. Also, the photoluminescence (PL) emission and photoluminescence excitation (PLE) spectra show the optical properties of trivalent $Eu^{3+}$ ions, not of divalent $Eu^{2+}$. Raman spectra exhibit that, without showing any difference before and after the doping of activators to the host material $CaWO_4$, all the gerade normal modes occur at the identical frequencies with the same shapes and weaker intensities after the substitution. However, the FT-IR spectra show that some of the ungerade normal modes have shifted positions and different shapes, caused by different masses of $Eu^{3+}$ ions (or $Na^+$ ions, or ${V_{Ca}}^{{\prime}{\prime}}$ vacancies) from $Ca^{2+}$.

• 한국화재소방학회논문지
• /
• 제29권5호
• /
• pp.29-33
• /
• 2015

본 연구에서는 노즐의 형상변화에 따라서 방사유량, 살수분포 그리고 액적크기를 측정하였다. 이를 위해서 중심부 직경이 6.0 mm이고 반지름 방향 방사각도가 $142^{\circ}$와 $148^{\circ}$인 이중 구조의 미세 물분무 노즐(LPN142, LPN148) 형상을 제작하여 UL2167 시험규격에 의해서 살수분포와 분사거리의 관계를 정량화하였다. Hellium-Neon 레이져에 의한 광학적 분석 방법을 적용하여 방사유량 변화에 따라서 웨버 수와 액적 크기 그리고 방사각도에 관한 경험식을 구하였으며, 전달 방정식의 주요인자인 소멸 항과 액적크기의 상관관계를 분석하였다. 그 결과 이중 구조의 미세 물분무 노즐은 최소허용 유량범위가 결정된 경우 작동압력, 분사거리, 액적 직경을 예측하여 화재특성을 분석함으로써 노즐 선정이 가능할 것으로 사료된다.

• Journal of Acupuncture Research
• /
• 제28권2호
• /
• pp.27-41
• /
• 2011

Objectives : The aim of this study was to examine the effect of manual acupuncture at the bilateral $LI_4$, $ST_{36}$ and $LR_3$ on normal human every 3 minute time interval by using power spectrum analysis. Methods : 25 healthy volunteers participated in this study. 32 channel EEG(Electroencephalogram) measurements were carried out before, during and after acupuncture treatments. In this study, power spectrum was used as a measure of complexity. Statistical analysis was performed using repeated measure ANOVA and Bonferroni method. Results : 1. In acupuncture group, Mean HRT, PSI, Normalized HF decreased significantly. SDNN, Ln(TP), Ln(LF), Ln(VLF), Normalized LF and LF/HF ratio increased significantly. RMSSD, Ln(HF) were not affected. 2. In sham acupuncture group, all indicators were not affected. 3. In control group, mean HRT, Ln(TP) decreased significantly. SDNN, RMSSD, PSI, Ln(LF), Ln(HF), Ln(VLF), normalized LF, normalized HF and LF/HF ratio were not affected. Conclusions : This results suggest that manipulation needling of 6 acupoints induced increase of delta, theta, beta waves. Both manipulation and simple needling induced decrease of alpha wave during 12~15 time intervals.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.176-181
• /
• 2009

본 연구에서는 염료 태양전지(Dye-sensitized solar cells; DSCs)에 적용하기 위한 나노-다공질의 FTO(F:$SnO_2$) 재료를 Sol-gel 연소법을 이용하여 다양한 열처리 온도를 변수로 제작하였으며, 각각의 결과물들에 대한 물성적 특성을 고찰하였다. FTO nano-powder는 SnCl4-98.0[%]와 HF-$48{\sim}51$[%]가 교반된 것에 NH4OH를 Sol-gel법의 촉매로 사용하였고, 첨가재로써 Ketjen Black을 사용하였다. 얻어진 결과물에 대한 XRD 측정 결과, 열처리 온도가 상승함에 따라 $SnO_2$의 회절각인 25.6[$^{\circ}$]($2{\Theta}$) 부근에서 강한 peak값이 나타났다. XPS 측정 결과에 의하면, 각각의 F1s, Sn 3d, O 1s의 binding energy는 682, 484, 528[eV]에서 광전자 피크가 확인되었다. 열처리 온도가 증가함에 따라 표면적이 감소하며, pore size는 증가함을 BET측정 결과로 알 수 있었다. 본 실험을 통해 열처리 온도조절에 따른 나노-다공성 FTO powder의 특성제어가 용이함이 확인되었고, Sol-gel 연소법에 의한 간단하고 효과적인 방법으로 나노-다공성 소재의 제작이 가능하여, DSCs의 응용에도 유용할 것으로 기대된다.

• Annals of Clinical Neurophysiology
• /
• 제3권1호
• /
• pp.26-30
• /
• 2001

Purpose : Eyeball movement is one of the main artifacts in EEG. A new approach to the removal of these artifacts is presented using independent component analysis(ICA). This technique is a signal-processing algorithm to separate independent sources from unknown mixed signals. This study was performed to show that ICA is a useful method for the separation of EEG components with little data deformity. Methods : 12 sets of 10 sec digital EEG data including eye opening and closure were obtained using international 10~20 system scalp electrodes. ICA with 18 tracings of double banana bipolar montage was performed. Among obtained 18 independent components, two components, which were thought to be eyeball movements were removed. Other 16 components were reconstructed into original bipolar montage. Power spectral analysis of EEGs before and after ICA was done and compared statistically. Total 12 pairs of data were compared by visual inspection and relative power comparison. Results : Waveforms of each pair looked alike by visual inspection. Means of relative power before and after ICA were 29.16% vs. 28.27%, 12.12% vs. 12.41%, 10.55% vs. 10.52%, and 19.33% vs. 18. 33% for alpha, beta, theta, and delta, respectively. These values were statistically same before and after ICA. Conclusions : We found little data deformity after ICA and it was possible to isolate eyeball movements in EEG recordings. Many other components of EEG could be selectively separated using ICA.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.131-140
• /
• 2017

Uniform nanofibers of polyurethane with different content of Juniperus Chinensis extracts (JCE) were successfully prepared by the electrospinning method. We investigated physiochemical properties of prepared compound nanoweb according to various concentrations of Juniperus Chinensis extracts using a Fourier transform infrared (FT-IR) spectrometer, X-ray diffractometer (XRD), thermogravimeter (TGA), and differential scanning calorimeter (DSC). The antibacterial activity of the JCE loaded PU nanofiber was conducted using the disk diffusion test against Gram-positive and Gram-negative bacteria. JCE was induced in the infrared spectra in the absorption band of PU/JCE nanowebs at $3,300cm^{-1}$, $2,960cm^{-1}$, $1,400-1,600cm^{-1}$, and $1,050cm^{-1}$. Thermal stability decreased with increasing JCE content in the PU/JCE nanowebs. The DSC curve of the PU nanoweb shows an endotherm peak at $420^{\circ}C$; in addition, the peak also became smaller and broader with increasing JCE content. The diffraction intensities of PU observed at 2 theta of $20^{\circ}$ decreased with the increasing amount of JCE in the compound nanoweb. In addition, the crystal intensities of the compound nanowebs also decreased along with the JCE content. Structural analysis indicates that JCE and PU are miscible. Juniperus Chinensis incorporated PU nanofibers demonstrated excellent antibacterial properties against both Gram-positive and Gram-negative bacteria.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.197-205
• /
• 2017

We investigate the slat noise generation mechanism by using large-eddy simulation (LES) and simple source modeling based on linearized Euler equations. An incompressible LES of an MD 30P30N three-element airfoil in the high-lift configuration is conducted at $Re_c=1.7{\times}10^6$. Using the total derivative of the hydrodynamic pressure (DP/Dt) acquired from the incompressible LES, representative noise sources in the slat cove region are characterized in terms of simple sources such as frequency-specific monopoles and dipoles. Acoustic radiation around the 30P30N multi-element airfoil is effectively computed using the Brinkman penalization method incorporated with the linearized Euler equation. The directivity pattern of $p^{\prime}_{rms}$ at $r=20c_{slat}$ in the multiple sources is closely compared to that obtained by the application of the LES/Ffowcs-Williams and Hawking's methods to the entire flow field. The power spectrum of p' at ${\theta}=290^{\circ}$ is in good agreement with the data reported in BANC-III, especially the broadband part of the spectrum with a decaying slope ${\propto}f^{-3}$.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.261-266
• /
• 2015

The capacity of passive metal to repassivate after film damage determines the development of local corrosion and the resistance to corrosion failures. In this work, the repassivation kinetics of 316L stainless steel (316L SS) was investigated in borate buffer solution (pH 9.1) using a novel abrading electrode technique. The repassivation kinetics was analyzed in terms of the current density flowing from freshly bare 316L SS surface as measured by a potentiostatic method. During the early phase of decay (t < 2 s), according to the Avrami kinetics-based film growth model, the transient current was separated into anodic dissolution ($i_{diss}$) and film formation ($i_{film}$) components and analyzed individually. The film reformation rate and thickness were compared according to applied potential. Anodic dissolution initially dominated the repassivation for a short time, and the amount of dissolution increased with increasing applied potential in the passive region. Film growth at higher potentials occurred more rapidly compared to at lower potentials. Increasing the applied potential from 0 $V_{SCE}$ to 0.8 $V_{SCE}$ resulted in a thicker passive film (0.12 to 0.52 nm). If the oxide monolayer covered the entire bare surface (${\theta}=1$), the electric field strength through the thin passive film reached $1.6{\times}10^7V/cm$.