• 한국응용과학기술학회지
• /
• 제27권1호
• /
• pp.56-60
• /
• 2010

Titanium dioxide particles are used as photocatalysts, sensors, adsorbents and catalyst. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 0.5~2.0 wt% EU-S133D, Titanium dioxide / Acrylate core-shell polymerization was carried out on the surface of Titanium dioxide particle without forming the new Titanium dioxide particle during acrylate shell polymerized in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer(TGA) and morphology of latex by scanning electron microscope(SEM).

• 한국응용과학기술학회지
• /
• 제27권1호
• /
• pp.93-97
• /
• 2010

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S75D) surfactant was prepared. The core-shell composite of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate(KPS) as an initiator. We studied the effect of surfactants on the core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant lauryl sulfate(SLS). The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer(TGA) and morphology of latex by scanning electron microscope(SEM).

• Composites Research
• /
• 제33권6호
• /
• pp.341-345
• /
• 2020

열중량분석기를 적용하여 탄소섬유/에폭시 복합재의 구성재 함유량을 평가하기 위한 측정기법을 제시하였다. 시험에 사용된 시료는 탄소섬유/에폭시 토우 프리프레그로 제작된 스트랜드 시편에서 채취하였으며 시간에 따른 시료의 무게 변화를 실시간으로 측정하였다. 또한 전자현미경을 이용하여 수지 제거 여부와 탄소섬유의 열손상 상태를 관찰하였다. 연구결과에 따르면 열중량분석기를 적용하면 기존의 머플로를 적용한 경우에 비해 소량의 시료에 대해서도 시험이 가능하며, 설정 온도와 노출 시간을 제어함으로써 구성재의 함유량을 효율적이고 정량적으로 평가할 수 있음을 알 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.213-222
• /
• 2011

To check adaptability of low ash coal(hyper coal) to chemical looping combustion, reaction characteristics of two coals (Roto and Hyper coal) with two oxygen carriers (NiO/bentonite, OCN703-1100) have been investigated in a thermogravimetric analyzer. Hyper coal represented low combustion rate and high ignition temperature, high volatile content and high devolatilization rate, and therefore, showed worse oxygen transfer during successive 10 cycle reduction-oxidation test than Roto coal. Finally we selected Roto coal as the candidate coal for chemical looping combustion. For Roto coal, OCN703-1100 particle showed better oxygen transfer than NiO/bentonite particle. During 10 cycle reduction oxidation test, change of the extent of oxidation (Wo) was negligible and we could conclude that both oxygen carriers have sufficient regeneration ability.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.183-187
• /
• 2010

Core-Shell polymers of silicone dioxide-styrene system were prepared by sequential emulsion polymerization. In inorganic/organic Core-Shell composite particle polymerization, silicone dioxide adsorbed by surfactant sodium dioctyl sulfosuccinate (EU-DO133L) was prepared initially and then core silicone dioxide was encapsulated emulsion by sequential emulsion polymerization using styrene at the addition of potassium persulfate (KPS) as an initiator. We found that $SiO_2$ core shell of $SiO_2$/styrene structure was formed when polymerization of styrene was conducted on the surface of $SiO_2$ particles, and the concentration sodium dioctyl sulfosuccinate (EU-DO133L) was 0.5~2.0g. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).

• Carbon letters
• /
• 제2권2호
• /
• pp.105-108
• /
• 2001

In this work, the activated carbons (ACs) with high micropores were synthesized from the polystyrene (PS) with KOH as activating agent. And the influence of activation temperature on porosity of the ACs studied was investigated. The porous structures of ACs were characterized by nitrogen adsorption at 77K using BET and D-R equations, and MP and BJH methods. The weight loss behaviors of the samples impregnated with KOH were also monitored using thermogravimetric analyzer (TGA). As a result, it was found that the samples could be successfully converted into ACs with well-developed micropores. From the results of pore size analysis, it was confirmed that elevated activation temperature does lead to the formation and deepening of microstructures without significant change in mesostructures. A thermogravimetric study showed that KOH could suppress the thermal decomposition of the sample, resulting in the increase of carbon yields.

• 공업화학
• /
• 제26권5호
• /
• pp.557-562
• /
• 2015

순환유동층 보일러에서 보일러 내의 탈황을 위해 사용되는 국내 석회석 5종의 탈황반응성을 비교 및 분석하기 위해서 TGA (Thermogravimetric analyzer)를 이용하여 실험하였다. 실험에 사용한 석회석 시료들의 $CaCO_3$ 함량은 91-96 wt%이었으며 실험 조건은 상용 순환유동층 보일러의 운전 조건과 유사한 $850^{\circ}C$의 온도와 2,750 ppm의 $SO_2$로 하였다. 실제 순환유동층 반응기 내에서 진행되는 보일러 내의 탈황을 모사하기 위하여 탈황제인 석회석의 소성과 탈황 반응을 순차적으로 진행하는 일반적인 탈황 반응과 달리 소성과 탈황 반응을 동시에 진행하였다. 또한 37.5, 90.5, 159, 356, $750{\mu}m$의 평균 입도를 가지도록 석회석을 분류하여 석회석의 입도에 따른 탈황 반응성의 변화를 고찰하였다. 석회석의 소성 탈황 동시 반응에서 측정된 탈황 결과는 기존의 석회석 탈황 결과보다 5-20% 정도 낮아 석회석의 로내 탈황에 더 많은 석회석이 필요함을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.463-464
• /
• 2006

광산업 및 디스플레이 산업의 발전에 따라 관련 제품의 핵심 부품 및 소재 개발이 매우 중요하게 대두되고 있다. 전계방출 소자 및 back light가 되는 나노 발광체의 핵심소재중 하나인 CNT paste는 국내외에서 연구가 진행중이다. 본 연구에서는 메탄올속에서 초음파를 이용하여 분산시킨 CNT 분말, 유기 바인더, 용매, glass frit, Ag powder 등을 사용하여 paste를 만들고, TGA(Thermogravimetric Analyzer)와 SEM(Scanning Electron Microscopy) 분석에 의해 제조 공정의 최적화를 실시하였다.

• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.672-677
• /
• 2014

반탄화는 $200{\sim}300^{\circ}C$의 불활성분위기에서 바이오매스를 전처리하는 열처리공정이며 이러한 반탄화 공정은 바이오 매스에 함유된 섬유질성분의 분해온도에 크게 영향을 받은 것으로 알려져 있다. 본 연구에서는 사탕수수 부산물의 반탄화 특성에 관한 연구를 수행하였으며 반탄화 온도 및 반탄화 시간에 따른 에너지 수율, 발열량 및 발생가스 그리고 가연분과 회분의 관계에 중점을 두었다. 또한 본 연구에서는 TGA(Thermogravimetric Analyzer)를 이용한 사탕수수 부산물의 반탄화 반응에 대한 활성화 에너지의 변화도 함께 고찰하였다. 본 연구로부터 반탄화 온도에 따라 회분 및 발열량은 증가하였으나 가연분 및 에너지 수율은 감소하였으며 또한 산소성분을 함유한 일산화탄소가 탄화수소 화합물, $C_xH_y$ 보다 더 낮은 온도에서 분해되기 시작하는 것을 확인할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.107-107
• /
• 2010

Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas have played an important role of synthesizing the valuable chemical compound, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuels and chemical production. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C/min$ in thermogravimetric analysis. Bubbling fluidized bed reactor were use to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, CO2, H2 and a small fraction of C1-C4 hydrocarbons.