• Journal of Pharmacopuncture
• /
• v.11 no.3
• /
• pp.113-122
• /
• 2008

Objective: The purpose of this study was to invigorate the use of infrared thermal imaging apparatus as a diagnostic tool in Oriental medicine by providing standard temperature on specific acupoints. Methods: Subjects for the study was recruited through an advertisement in the school homepage(www.sangji.ac.kr) explaining the objectives and methods. 100 volunteers agreeing to terms were selected and measured the full body thermal image. Common acupoints used in the clinical surrounding were chosen and final 63 acupoints were selected for the measurement. Male/female and right/left readings were obtained for the analysis. Results: Following results were obtained from analyzing the body temperature of 50 male subjects and 50 female subjects 1. Subjects participating in the study ranged from 19 years of age to 44 years. Median male age at $26.86{\pm}6.02$ and female age at $22.88{\pm}2.74$, respectively. 2. For all acupoints, no significant differences were witnessed between the gender and right, left side of the body. 3. 10 acupoints from the facial region(18 bilateral), 8 acupoints from the chest/abdomen region(10 bilateral), 6 acupoints from the back region(11 bilateral), 17 acupoints from the upper extremity(34 bilateral), and 22 acupoints from the lower extremity(44 bilateral) were chosen. 4. In the facial region, BL2 showed the highest temperature and GV26 showed the lowest. 5. In the chest/abdomen region, CV22 showed the highest temperature and CV6 showed the lowest. 6. In the back region, GV14 showed the highest temperature and BL23 showed the lowest. 7. In the upper extremity region, jianqian(extra point) showed the highest temperature and baxie(extra point) showed the lowest. 8. In the lower extremity region, KI1 and bafeng(extra point) shoed the highest temperature and BL40 showed the lowest. Conclusions: Based on the standard body temperature measured on specific acupoints throughout the body, we hope these findings can trigger further studies on applications of infrared thermal imaging and clinical usage in the field of oriental medicine.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.148-152
• /
• 2010

Purpose: In treating diabetic foot ulcers, satisfactory vascularity is an essential prerequisite. To improve vascularity, a bypass graft has long been carried out. Recently, however, percutaneous transluminal angioplasty (PTA) has also been tried since the PTA is less invasive than the bypass graft. However, publication demonstrating the improvement of vascularity after the PTA are lacking. Therefore, this study was designed to show usefulness of the PTA in treating vasculopathy of diabetic foot. Materials: and Methods This study included 30 feet of 24 ischemic diabetic foot patients. Inclusion criteria were diabetes (duration > 5 years) and a significant lower extremity ischemia, as determined by a transcutaneous oxygen pressure ($TcpO_2$) < 30 mmHg. The PTA was carried out in 61 arteries. PTA procedure was considered successful, when residual stenosis was less than 30%. The procedure was considered failed when residual stenosis was more than 50%. Residual stenosis between 30% and 50% was considered acceptable. For evaluation of PTA effect, foot $TcpO_2$ and infrared thermography were measured before and 7th day after PTA. Results: Immediately after PTA performed in 61 arteries, 58 and 3 arteries were evaluated as being successful and acceptable, respectively. Before PTA, average foot $TcpO_2$ was $12.6{\pm}8.8$ mmHg and its value was increased to $44.2{\pm}23.9$ on 7th day after PTA (p<0.01). Average skin temperature was $31.8{\pm}1.2^{\circ}C$ before PTA and it was increased to $33.5{\pm}1.1^{\circ}C$ on 7th day after PTA (p<0.01). Conclusion: PTA procedure increases tissue oxygenation of ischemic diabetic feet which do not have wound healing potential due to low tissue oxygenation, to the level of possible wound healing. In addition, PTA increases skin temperature of ischemic diabetic feet which can imply an improvement of peripheral circulation.

• Journal of Oriental Medical Thermology
• /
• v.1 no.1
• /
• pp.38-46
• /
• 2002

1. Objectives Among many symptoms that the climacteric patients complain of, the major subjective symptom is both heat in the upper part and cold in the lower part of the body(e.g foot, knee, and leg). We use DITI as a method to prove the symptoms of climacteric patients such as both heat in the upper part and cold in the lower part of the body, diagnose these symptoms, and follow up the progress of the clinical treatments. 2. Subjects and Methods We compare the subcutaneous heat of the climacteric patients with the symptom of heat in the upper part and cold in the lower part of the body with young women without any specific disease. The age distribution of the experimental group is 28 patients in 40's, and 22 in 50's. The mean age of the experimental group is $48.5{\pm}4.25$. The age distribution of the control group is 17 patients in teen, 26 in 20's, 7 in 30's. The mean age of the control group is $23.31{\pm}6.45$. We measure the subcutaneous heat on the cheeks, upper arms, palms, thighs, knees, dorsum pedis, lower back, hip, upper abdomen, lower abdomen of both groups and analyse the results. 3. Statistical methods All the results are statiscally analysed using student T-test of Microsoft Exel program. Statistically significant value by the analysis of variance procedure is P<0.05. 4. Results 1. The subcutaneous heat of the whole body of the experimental group shows hypothermia compared with control group, and the hypothermic pattern gets severe on the periphery. ${\Delta}T$ between the right and left side of the body in experimental group is larger than that of control group. 2. ${\Delta}T$ between the cheeks and the hypogastric in the experimental group is significantly larger than that of the control group, which shows cold face. 3. ${\Delta}T$ between the upper arms and the palms in the experimental group is significantly larger than that of the control group, which shows cold hand. 4. ${\Delta}T$ between the thighs and the knees in the experimental group is significantly larger than that of the control group, which shows cold knee. 5. ${\Delta}T$ between the thighs and the feet in the experimental group is significantly larger than that of the control group, which shows cold foot. 6. ${\Delta}T$ between the hip and the lower back in the experimental group is significantly larger than that of the control group. That shows the Lower back is warmer than the hip. 7. ${\Delta}T$ between the upper and the lower abdomen in the experimental group is significantly larger than that of the control group, which shows cold hypogastric.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.357-369
• /
• 2011

The Bongamsa Jeongjindaesa Wonotap Pagoda (Treasure No. 171) constructed in the 10th century composed mainly of leucocratic granite with feldspar phenocryst. The major rock-forming minerals are quartz, orthoclase, plagioclase and some biotite. This pogoda is highly damaged physical weathering which are break-out, flakes, exfoliation and cracks. As a result of the infrared thermography on the surface of the pagoda, internal exfoliations occurred to cracks. Also, P-XRF analysis showed that Fe, S, Ca and Mn of concentration were so high in the discoloration parts. The coated part of red pigment has a high five times in Fe content than the fresh rock surface. This result suggests that material of red pigment is hematite. Ultrasonic velocity of the stone properties were from 831 to 2,457 m/s, but it measured velocity of less than 1,000m/s in part of damaged area. Therefore, we suggest for safety conservation for weathered parts of the pagoda, that is in want of rejoin and consolidation treatment about serious damage parts.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.230-237
• /
• 2011

The study was performed to investigate the characteristics of charcoal and temperature change of a kiln's inner and outer walls in carbonization process using improved kiln. In this kiln system, carbonization process was completed in eight days. In the kiln, the ignition temperature was kept about $720^{\circ}C$. And then the temperature were increased gradually prior to be refined. Finally, the temperature in refining process was reached to maximum point, $1,000^{\circ}C$. In the chimney, the temperature was increased gradually from $90^{\circ}C$ at ignition to $750^{\circ}C$ at refining. The temperature change of the kiln wall resembles a temperature change progress curve during a carbonization process. The highest temperature of the kiln wall that appeared by a carbonization process was around $500^{\circ}C$. As a result of having measured an inner wall and the outer wall of the kiln using an infrared thermography camera, it was judged with there being considerable latent heat on kiln wall and ceiling. Fixed carbon contented of charcoal was 85.9~89.9%. Refining degree of charcoal, hardness, calorific value and pH were l, 12, 7,047~7,456 kcal/kg, 9.0~9.9, respectively. The yield of wood charcoal was 13.8%, and compared to conventional kiln's yield increased 1.5%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.6
• /
• pp.619-627
• /
• 2016

Cells of a PV (photovoltaic) module can suffer defects due to various causes resulting in a loss of power output. As a malfunctioning cell has a higher temperature than adjacent normal cells, it can be easily detected with a thermal infrared sensor. A conventional method of PV cell inspection is to use a hand-held infrared sensor for visual inspection. The main disadvantages of this method, when applied to a large-scale PV power plant, are that it is time-consuming and costly. This paper presents an algorithm for automatically detecting defective PV panels using images captured with a thermal imaging camera from an UAV (unmanned aerial vehicle). The proposed algorithm uses statistical analysis of thermal intensity (surface temperature) characteristics of each PV module to verify the mean intensity and standard deviation of each panel as parameters for fault diagnosis. One of the characteristics of thermal infrared imaging is that the larger the distance between sensor and target, the lower the measured temperature of the object. Consequently, a global detection rule using the mean intensity of all panels in the fault detection algorithm is not applicable. Therefore, a local detection rule was applied to automatically detect defective panels using the mean intensity and standard deviation range of each panel by array. The performance of the proposed algorithm was tested on three sample images; this verified a detection accuracy of defective panels of 97% or higher. In addition, as the proposed algorithm can adjust the range of threshold values for judging malfunction at the array level, the local detection rule is considered better suited for highly sensitive fault detection compared to a global detection rule. In this study, we used a panel area extraction method that we previously developed; fault detection accuracy would be improved if panel area extraction from images was more precise. Furthermore, the proposed algorithm contributes to the development of a maintenance and repair system for large-scale PV power plants, in combination with a geo-referencing algorithm for accurate determination of panel locations using sensor-based orientation parameters and photogrammetry from ground control points.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2006

PURPOSE: Previous studies have documented the lack of ultrasound's non-thermal effects on nerve conduction using frequencies of 1 MHz and 870 kHz. The purpose of this study was to determine the biophysical effects of continuous ultrasound on median local forearm temperature and motor nerve conduction velocities using frequencies of 3.0 MHz. SUBJECTS: Twelve healthy subjects (6 males, 6 females, age $22.30{\pm}2.41$ yrs, weight $61.33{\pm}10.16$ kg, height $167.58{\pm}8.04$ cm) without a history of neurological or musculoskeletal injury to their dominant arm volunteered for this study. METHODS AND MATERIALS: Each subject received a total of five treatments, one each at .0, 0.5, 1.0, 1.5, 2.0 W/$cm^2$ of 3 MHz continuous ultrasound on the anterior surface of the middle area of dominant forearm for 10 minutes. Dependent measures for forearm local temperature and median motor nerve conduction velocity (MNCV) were taken pretreatment and immediately post-treatment. One-way ANOVA were used for each dependent measure. RESULTS: The posttreatment forearm local temperature were differed significantly (p<0.001) between intensities of ultrasound. The posttreatment forearm local temperature of the ultrasound treated with 1.0 w/$cm^2$, 1.5 w/$cm^2$ and 2.0 w/$cm^2$ were significantly higher than 0.5 w/$cm^2$ and 0.0 w/$cm^2$ of ultrasound (p<0.05). The posttreatment median MNCV were differed significantly from the respective pretreatment velocities (p<0.001). The MNCV of the ultrasound treated with 0.0 w/$cm^2$ and 0.5 w/$cm^2$ were significantly (p<0.05) slower than that observed pretreatment, while the three ultrasound intensities produced significantly increased posttreatment MNCV: 1.0 w/$cm^2$ and 1.5 w/$cm^2$ and 2.0 W/$cm^2$. The posttreatment MNCV at 2.0 w/$cm^2$ and 1.5 w/$cm^2$ was significantly faster than that at 0 w/$cm^2$, 0.5 w/$cm^2$ and 1.0 w/$cm^2$ (p<0.05), the MNCV at 1.0 w/$cm^2$ was significantly faster than that associated with 0 w/$cm^2$ and 0.5 w/$cm^2$ of ultrasound (p<0.05). CONCLUSIONS: The decreased median motor forearm local temperature and MNCV of the ultrasound treated with 0.0 w/$cm^2$ and 0.5 w/$cm^2$ were attributed to the cooling effect by ultrasound transmission gel. Local forearm temperature and nerve conduction velocity were directly related to the intensity of ultrasound. Alterations in MNCV from ultrasound on healthy nerves appeared to be related to temperature changes induced by thermal effects of ultrasound.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.8
• /
• pp.386-396
• /
• 2006

We implemented the Drug-Pad Moxibustion Method in order to improve the conventional moxibustion therapy. This method is aimed to eliminate burning wounds and smoke, which are the defects of conventional moxibustion therapy. And we performed to verify the efficiency by comparing the Drug-Pad Moxibustion Method with the conventional Indirect Moxibustion Therapy. We measured the body heat and the lasting time of blood circulation improvement using thermography. The moxibustion therapy has two kinds of effects: The formers are pharmacological effects of the Moxa's vasodilators and antioxidants. The latters are thermal effects which cause improvement of the blood circulation. To remove the demerits without omission of above therapeutic effects, we extracted the vasodilators and antioxidant compounds from the Moxa-$CH_2Cl_2$ fraction Moxa-EtOAc and composed the moxibustion kit with $(Ba_{0.8}\;Sr_{0.2})_{0.996}\;Y_{0.004}\;TiO_2+0.5_{WT}\;SiO_2%$ Positive Temperature Coefficients Thermistor. The experimental demonstrations have been made by the stimulating the spot which is CV4(Kwan-Won), CV8(Shin-Guel), CV12(Jung-Wan) acupuncture points of the conception vessel meridian(CV). And stimulating time was one hour. We divided the subjects into 5 groups such as no stimulation group, conventional Indirect Moxibustion group, only Drug-Pad stimulation group, only heat stimulation group, and Drug-Pad Moxibustion group. In the different cases, we have measured the body heat in pre-stimulation, just after stimulation, 2 hours after, and 4 hours after. The body heats of the group who were stimulated by the Drug-Pad Moxibustion Method were increased by over the $2^{\circ}C$. And the body heats of the group who were stimulated by the Indirect Moxibustion Method were increased by average the $1^{\circ}C$. We have evaluated that the Drug-Pad Moxibustion Method is improvement on the conventional Indirect Moxibustion Method by the heat-increasing rate is 200% and the lasting time is 150% with the body heat of the abdominal region. In the conclusions, We have implemented the Drug-Pad Moxibustion Method and evaluated the efficiency of the Drug-Pad Moxibustion Method comparing with the conventional Indirect Moxibustion Method.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.349-360
• /
• 2010

The Yeongsheon Sinwoldong three-storied stone pagoda (Treasure No. 465) composed mainly of drusy alkali-granite. The major rock-forming minerals are biotite, quartz, amphiboles, orthoclase and plagioclase. Yellowish brown and black discoloration are formed at the eight sculpture Buddha of the stylobate. A broken rock fragments in the roof material were repaired using epoxy resin and cement mortar in the past. As a result of the infrared thermography analysis from the pagoda, cracks and exfoliation were not serious. Also, P-XRF analysis showed that concentration of Fe (mean 5,599ppm) and S (mean 3,270ppm) were so high in yellowish discoloration parts. Black discoloration area was detected highly Mn (mean 2,155ppm) concentration around the eight sculpture Buddha of the stylobate. The main reason for these are inorganic contaminants from disengaged rock ingredient and organic contaminants from withered plant body. Degree of physical weathering is relatively high in the southern and northern side. The eastern and western side had similar with weathering condition. The northern and eastern side were serious discoloration and biological weathering relatively. Therefore, we suggest that the pagoda need to do cleaning of biological contaminant and conservation treatment to weakened materials of rock and long term monitoring.

• Journal of Acupuncture Research
• /
• v.17 no.2
• /
• pp.31-39
• /
• 2000

Object : This study is designed to evaluate the correlation between the data of DITI(Digital Inrared Thermographic Imaging) examination and the changes of clinical symptoms after the therapy of acupuncture in the patients with spondylolisthesis. Contents : The conservative therapy with acupuncture was performed during 3-4weeks. The acupuncture points of BL23, BL24, BL25, BL40, BL57, BL60, BL62, GB30, GB31, ST36, TE3 was used. In the pre- and post therapy, DITI examinations were performed in patients who had spondylolisthes in L-spine X-ray and were treated by acupuncttare simultaneously, and then tried to correlate the results of clinical symptoms with the difference of thermographic findings at pre-and post acupuncture. Setting : The standard routine thermographic exanninations were performed with thermography (DITI) in the 22 patients with spondylolisthesis at pre- and post acupuncture. Patients : Thermographic imaging of 22 cases was analyzed. They had diagnosed spondylolisthes in L-spine X-ray. They were treated by acupuncture and moxibustion therapy in Wonkwang Oriental Hospital from May, 1998 to May, 2000. Results : 1) The causes were congenital (4.5%), overwork (31.85%), trauma (13.65%), degenerative factor(50%) 2) The DITI results showed 45.4% below $0.3^{\circ}C$, 36.4% between 0.3 and $0.5^{\circ}C$, 4.5% between 0.5 and $0.7^{\circ}C$, 9.1% between 0.7 and $0.9^{\circ}C$, and 4.5% over $0.9^{\circ}C$. 3) The results of treatment using pain scale showes that 27.3% of patientsachieved excellent recovery and 54.6% achieved good recovery. After compairing the DITI results before and after treatment, we found 45.4% of patients achieved excellent recovery and 36.4% achieved good recovery. Conclusion : Acupuncture showed good results over 81.9% in clinical evaluation and 81.8% in DITI. Thermographic examination was valuable in the evaluation of therapeutic effect of acupuncture treatment.