• Steel and Composite Structures
• /
• 제41권6호
• /
• pp.873-886
• /
• 2021

In this paper, an analytical solution for thermodynamic response of functionally graded (FG) sandwich plates resting on variable elastic foundation is performed by using a quasi 3D shear deformation plate theory. The displacement field used in the present study contains undetermined integral terms and involves only four unknown functions with including stretching effect. The FG sandwich plate is considered to be subject to a time harmonic sinusoidal temperature field across its thickness with any combined boundary conditions. Equations of motion are derived from Hamilton's principle. The numerical results are compared with the existing results of quasi-3D shear deformation theories and an excellent agreement is observed. Several numerical examples for fundamental frequency, deflection, stress and variable elastic foundation parameter's analysis of FG sandwich plates are presented and discussed considering different material gradients, layer thickness ratios, thickness-to-length ratios and boundary conditions. The results of the present study reveal that the nature of the elastic foundation, the boundary conditions and the thermodynamic loading affect the response of the FG plate especially in the case of a thick plate.

• 한국주조공학회지
• /
• 제29권4호
• /
• pp.181-186
• /
• 2009

The interrelationship between new parameter ${\sigma}$ and maximum diameter $D_{max}$ is elaborated and discussed in comparison with four other glass forming ability (GFA) parameters, i.e. (1) super-cooled liquid region ${\Delta}T_x (=T_x - T_g)$, (2) reduced glass transition temperature $T_{rg} (=T_g/T_l)$, (3) K parameter $K (=[T_x-T_g]/[T_l -T_x])$, and (4) gamma parameter ${\gamma}(=[T_x]/[T_l+T_g])$ in Ca-based bulk metallic glass (BMG) systems. The ${\sigma}$ parameter, defined as ${\Delta}T^*{\times}P^'$, has a far better correlation with $D_{max}$ than the GFA parameters suggested so far, clearly indicating that the liquid phase stability and atomic size mismatch dominantly affect the GFA of Ca-based BMGs. Thus, it can be understood that the GFA of BMGs can be properly described by considering structural aspects for glass formation as well as thermodynamic and kinetic aspects for glass formation.

• 대한화학회지
• /
• 제7권2호
• /
• pp.174-178
• /
• 1963

The new method to determine the parameters in the liquid partition function of H. Eyring and co-workers is proposed, in which method the equilibrium condition of the three phases and the boundary condition of the liquid partition function at the triple point are used. The calculated thermodynamic properties using the new determined parameters are agreed well with the observed values.

• Bulletin of the Korean Chemical Society
• /
• 제22권1호
• /
• pp.43-45
• /
• 2001

This study simplifies the phenomenological theory of viscosity previously proposed by the present authors. This simplified theory has only two thermodynamic properties and one parameter, as opposed to its predecessor, which has many, allowing for easy calculation of the liquid viscosities. The viscosity of liquid metals, an excellent test for checking the validity of the liquid theory, can be calculated using the equation based on the simplified theory. The calculated results by the current theory turn out to be good for the liquid metals, including sodium, potassium, rubbidium, cesium, lead and mercury.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.451-456
• /
• 2005

The mathematical model for the heat exchangers of absorber and desorber is made in the elementary control volume method and the thermodynamic properties of working fluid. water/ammonia mixture. are calculated by some fundamental subroutines in RefProp 7.0 and flash subroutines made by authors The simulation results show that two-stage cycle has higher COP than single stage if temperature lift is high: the performance of single stage compression cycle can be improved by increase of absorber pressure. but the performance of two-stage compression cycle can not be improved in this way : the compressor discharging temperature of two-stage compression is much lower than that of single stage cycle. which is very important to the safety operation of CA heat pump. Major parameter comparison between the cycles at their optimal configurations is also given.

• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.37-42
• /
• 2003

전자 패키징에 사용되는 솔더합금에 납을 함유됨으로써 인하여 야기되는 환경적 문제와 인체 유해성 때문에 Pb-Sn 합금계를 대체할 수 있는 새로운 무연 솔더 재료의 필요성이 대두되고 있다. 새로운 솔더합금의 개발에 있어서 솔더 조인트의 신뢰성이 가장 중요한 문제라고 할 수 있는데, 솔더 조인트의 신뢰성은 솔더와 기판 사이의 계면 반응 형태와 그 정도에 의해서 크게 영향을 받기 때문에 솔더와 기판 사이의 계면 현상에 관한 더 깊은 이해가 필요하게 된다 솔더링 동안 기판/솔더 계면에서 가장 먼저 생성되는 금속간 화합물의 상을 예측하기 위한 열역학적인 방법이 제안되었다. 계면 에너지와 석출 구동력의 함수로 표현되는 각각의 금속간 화합물에 대한 핵생성 활성화 에너지를 비교함으로써 활성화 에너지가 가장 낮은 금속간 화합물이 가장 먼저 생성된다고 예측하였다. 거기에 더해 에너지를 기반으로 한 계산을 통하여 솔더 조인트에서 금속간 화합물의 입자 형상을 설명하였다. 울퉁불퉁한 계면을 가진 금속간 화합물의 Jackson의 parameter 값은 2보다 작은 반면 평평한 입자의 경우 2보다 크게 된다.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.255-261
• /
• 2016

활성탄을 사용한 Acid Yellow 14 염료의 흡착 실험은 흡착제의 양, pH, 초기농도, 접촉시간과 온도를 흡착변수로 사용하여 수행하였다. 흡착평형자료는 Langmuir, Freundlich 및 Temkin 등온식을 사용하여 해석하였는데, Freundlich 식이 가장 좋은 일치도를 나타냈다. 평가된 Freundlich 상수(1/n=0.129~0.212)와 Langmuir 분리계수($R_L=0.202{\sim}0.243$)로부터 활성탄에 의한 Acid Yellow 14의 흡착조작은 적절한 처리방법이 될 수 있음을 알았다. Temkin의 흡착열관련상수(B)는 5.101~9.164 J/mol로 평가되어, 흡착공정이 물리흡착임을 알았다. 흡착속도실험자료를 유사일차반응속도식과 유사이차반응속도식에 적용해 본 결과, 흡착동력학은 유사이차반응속도식에 잘 맞는 것으로 나타났다. Gibbs 자유에너지(-4.81~-10.33 kJ/mol)와 엔탈피(+78.59 kJ/mol)는 흡착이 자발적이고 흡열공정으로 진행된다는 것을 나타낸다.

• 항공우주기술
• /
• 제4권1호
• /
• pp.18-24
• /
• 2005

가스터빈엔진에서 압축기가 사용하는 에너지는 터빈에서 생성하는 에너지의 30-50%까지도 이르기 때문에 압축기의 일을 줄이는 연구는 가스터빈의 효율을 증가시키는 문제와 연관된 중요한 연구주제이다. 압축기의 일을 줄이는 한 가지 방법으로 압축기의 입구에 물입자를 분사하는 방법이 제안되었는데, 이 방법은 물입자가 증발하면서 압축기 출구의 온도를 낮추어서 결과적으로 압축과정에 소요되는 에너지를 줄일 수 있는 방법이다. 이전까지의 연구는 열역학적 해석에 집중하여 온도 및 일의 감소를 해석하거나, 실험에 근거하여 가스터빈의 성능변화에 집중되었다. 본 논문에서는 물분사의 영향을 마이크로 터빈용 원심 압축기에 적용하여 열역학적 해석 뿐 아니라 공력학적 해석을 수행하였다. 물을 분사할 경우 공기압축과정보다 임펠러 출구 유동각이 줄어들었으며, 증발율이 높을수록 유동각 감소가 증가하였고, 압력비가 낮을수록 유동각 감소가 증가하였다.

• 한국염색가공학회지
• /
• 제14권1호
• /
• pp.51-57
• /
• 2002

In the prior study, the mechanical properties and the dyeability of the easily dyeable polyester grim(EDY) were investigated. In this study, to interpret the dyeing behavior of EDY with C. I. Disperse Violet 1, the thermodynamic parameters of dyeing, such as the standard affinity, the heat of dyeing(the enthalpy change), the entropy change, the diffusion coefficient, and the activation energy of diffusion, were obtained from adsorption isotherms and dyeing rate at various temperatures and compared to these of regular polyester (REG-PET). The heat of dyeing(the enthalpy change) and the entropy change for EDY showed smaller negative values than those for REG-PET. This means that the dye molecules in the EDY are combined more loosely than in the REG-PET and that is due to the flexibility of polymer chains of EDY. The diffusion coefficients of C. I. Disperse Violet 1 into the EDY were larger than those for REG-PET, and the activation energy of diffusion on EDY was smaller than that on REG-PET.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.61-71
• /
• 1999

The study aimed at the theoretical analysis of vapor sorption properties of, pp.rmaking fibers. Water vapor affinity and sorption thermodynamic properties of fiber constituents were evaluated based on Henry's law and Hildebrand's solubility theory. Theoretical equilibrium moisture content(ThEMC) on fiber surface was estimated using functional group contribution. Crystallinity of cellulose in fiber significantly controlled the water vapor solubility. Comparisons of the measured equilibrium moisture content data and the estimated ThEMC data coincidently suggested the fact that crystallinity of cellulose in fibers was around 60% to 70%. Carbohydrates constituents including amorphous cellulose and hemicellulose in fibers showed higher vapor solubility than lignin molecules. High correlation existed between ThEMC and vapor solubility as well as between ThEMC and solubility parameter. In the thermodynamic analysis on water-vapor sorption process in fibers, the sorption enthalpy increased as RH increased, whereas sorption entropy and free energy decreased with increasing RH.