• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.243-246
• /
• 2008

This paper is to consider analytical thermodynamic modeling of bipropellant propulsion system. The objective of thermodynamic modeling is to predict thermodynamic conditions such as pressures, temperatures and densities in the pressurant tank and the propellant tank in which heat and mass transfer occur. In this paper also it shows analytic equations that calculate the evolution of ullage volume and interface areas. Since the ullage interface areas are time-varying,(the liquid propellant volume decreases as the rocket engine is firing; the change of ullage volume correspond to the change of liquid propellant volume) for a numerical convenience non-dimensionalized correlations are commonly used in most literatures with limitations; a few percentages of inherent error. The analytic equations are derived from analytic geometry, subsequently without inherent error. Those equations are important to calculate the heat transfer areas in the heat transfer equations. It presents the comparison result of both analytic equations and correlation method.

• 한국주조공학회지
• /
• 제41권5호
• /
• pp.445-453
• /
• 2021

다양한 합금계에 대한 계산열역학은 CALPHAD 기법으로 잘 알려져있다. 실험적으로 측정된 열역학 특성들을 활용하여 각 상에 대한 Gibbs 에너지 모델 파라미터들을 구하여, 주로 실험적으로 측정되지 못한 영역에 대한 예측이나 실험 결과에 대한 열역학 해석에 활용되고 있다. 본 연구에서는 내열 주조 합금 (IN-657)이 장시간 사용 후에 일정 영역에서 파괴되는 현상의 열역학적 해석을 위해 Ni-Cr-Nb-C 사원계 시스템의 열역학 모델링을 수행하였고, Cr 함량에 따른 시스템의 안정상, 온도에 따른 상분율 및 Ni₂Cr상의 long range ordering 파라미터를 계산하였고 실험결과와 비교하였다. 계산된 열역학 물성들은 실험으로 보고된 파괴온도 영역 및 해당 영역에서 생성된 안정상에 대한 결과를 잘 설명한다. CALPHAD 기법을 통한 열역학 모델링은 다양한 주조 합금의 열역학적 거동을 해석하고 예측하는데 유용하게 사용될 수 있을 것으로 기대된다.

• 방사성폐기물학회지
• /
• 제21권4호
• /
• pp.427-438
• /
• 2023

Thermodynamic sorption modeling can enhance confidence in assessing and demonstrating the radionuclide sorption phenomena onto various mineral adsorbents. In this work, Ca-montmorillonite was successfully purified from Bentonil-WRK bentonite by performing the sequential physical and chemical treatments, and its geochemical properties were characterized using X-ray diffraction, Brunauer-Emmett-Teller analysis, cesium-saturation method, and controlled continuous acid-base titration. Further, batch experiments were conducted to evaluate the adsorption properties of Cs(I) and Sr(II) onto the homoionic Ca-montmorillonite under ambient conditions, and the diffuse double layer model-based inverse analysis of sorption data was performed to establish the relevant surface reaction models and obtain corresponding thermodynamic constants. Two types of surface reactions were identified as responsible for the sorption of Cs(I) and Sr(II) onto Ca-montmorillonite: cation exchange at interlayer site and complexation with edge silanol functionality. The thermodynamic sorption modeling provides acceptable representations of the experimental data, and the species distributions calculated using the resulting reaction constants accounts for the predominance of cation exchange mechanism of Cs(I) and Sr(II) under the ambient aqueous conditions. The surface complexation of cationic fission products with silanol group slightly facilitates their sorption at pH > 8.

• 한국수소및신에너지학회논문집
• /
• 제32권3호
• /
• pp.189-195
• /
• 2021

A compressed hydrogen tank is to be repressurized to 40 bar by being connected to a high-pressure line containing hydrogen at 50 bar and 25℃. Hydrogen filling time and the corresponding hydrogen temperature has been estimated when the filling process stopped according to several thermodynamic models. During the process of cooling the hydrogen tank, hydrogen temperature and pressure vs. time estimation was performed using Aspen Dynamics. Filling time, hydrogen temperature after filling hydrogen gas, cooling time and the final tank pressure after tank filling process have been completed according to the thermodynamic models are almost same.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.488-495
• /
• 2017

본 연구에서는 열역학적 평형을 이용한 OPC의 재령에 따른 운동학적 수화 생성물 모델링과 GGBS의 치환률에 따른 수화 생성물의 변화를 모델링하였다. 열역학 데이터는 GEMS의 3rd party 데이터베이스, Cemdata18을 사용하였고, 시멘트 수화 모델링은 Parrot & Killoh 모델을 적용하였다. OPC모델링에서 재령에 따라 Pore solution의 이온 농도와 수화 생성물의 질량 및 부피 변화를 관찰할 수 있었다. GGBS모델링에서는 치환률이 증가함에 따라 장기강도를 지배하는 C-S-H의 생성량은 증가하지만, 내구성에 영향을 미치는 Portlandite의 생성량이 감소하여 탄산화에 대한 대책이 필요할 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.109-112
• /
• 2007

In this paper, a mathematical modeling was developed to simulate 1kW class air cooled Polymer Electrolyte Membrane Fuel Cell(PEMFC) system. The proposed modeling was conducted under SIMULINK based environment. The model ing was developed based on the thermodynamic and chemical equilibrium. The objective is to design and implement the entire fuel cell system model ing including the system controller modeling. The fuel cell process and the control system modeling should have to be connected with each other simultaneously， therefore the two types of modeling influences each other when the system simulator run. The fuel cell modeling libraries are simulated using the SIMULINK under the thermodynamic and chemical equilibrium base. The PID controller application was designed and developed to test the process modeling and verify it. This the prototype development of the fuel cell system to design and test more complicate fuel cell systems, like the residential power generation system. The simulation results was compared to the real PEMFC system performance. We have achieved the reasonable accordance with the Lab test and the simulation results.

• 대한토목학회논문집
• /
• 제41권4호
• /
• pp.341-345
• /
• 2021

고로슬래그는 콘크리트의 염소이온침투 저항성능 개선 목적으로 가장 널리 활용되는 혼화재이나, 해수에 노출된 고로슬래그 혼입 콘크리트의 장기거동 및 상변이에 대한 보고는 부족한 실정이다. 본 연구에서는 열역학 모델링을 통해 해수에 노출된 슬래그 시멘트의 장기 상변이를 모사하였다. 모델링 결과 슬래그 혼입은 해수에 노출되었을 때 상변이가 쉽게 일어나지 않는 안정적인 상을 생성시킬 것으로 예측되었다. 해수에 노출되었을 때 ettringite 생성으로 인해 포틀랜드 시멘트 및 슬래그 시멘트에서 모두 팽창이 일어날 것으로 예측되었으나, 슬래그 시멘트에서는 brucite가 덜 생기는 것을 확인하였다. 공극률은 슬래그 혼입 시멘트의 경우 더 높았으나, 염소 흡착능이 높은 알루미네이트 수화물이 슬래그 시멘트에서 더 활발히 생성되는 것을 확인하였다. 따라서 슬래그 혼입을 통해 해양 환경에서 사용되는 콘크리트의 내구성능을 크게 증진시킬 수 있는 것으로 나타났다.

• 태양에너지
• /
• 제9권3호
• /
• pp.73-80
• /
• 1989

This paper presents as assessment based on steady-state thermodynamic analysis and computer modeling of a double effect generation absorption heating cycle for solar air-conditioning to find operating temperature ranges. The influences of component temperatures on the heating coefficients of performance and mass flow ratio have been investigated to obtain optimum operating conditions for the proposed air conditioning system. And the single and double effect absorption cycles are compared with each other over the same range of temperatures.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.649-658
• /
• 2000

Thermodynamic modeling of low-pressure scroll compressor was developed by combining continuity and energy conservation equation. Suction gas heating was considered using energy balance inside the low pressure shell. Pressure, temperature and mass of refrigerant-22 as a function of orbiting angle were calculated by solving the governing equations using fourth order Rung-Kutta scheme. Motor efficiency was taken by experiments with a variation of frequency. The developed model was applied to the analysis of an inverter driven scroll compressor with a variation of frequency, pressure ratio and operating conditions. The model was verified with the experimental results at the same operating conditions. The developed model was adequate to predict performance of the inverter driven scroll compressor as a function of operating conditions. Calculated parameters from the model were discharge temperature, mass flow rate, power input, COP, and thermodynamic properties with respect to orbiting angle. To enhance the performance of a scroll compressor, it is essential to diminish leakage at low frequency level and improve the mechanical efficiency at high frequency level.

• 한국건설순환자원학회지
• /
• 제18권3호
• /
• pp.24-28
• /
• 2023