• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.224-230
• /
• 2008

In this article, $TiO_2$ nanoparticles were synthesized by using $O_2$-enriched coflow, hydrogen, diffusion flames. We investigated the thermal stability of the flame-synthesized $TiO_2$ nanoparticles by examining the crystalline structures of the nanoparticles. Also, the results were compared with those of commercial P-25 nanoparticles. $TiO_2$ nanoparticles, which were spherical with diameters approximately ranging from 30 to 60nm, were synthesized. From the XRD analyses, about 96wt% of the synthesized nanoparticles were anatase-phase. After the heat-treatment at $800^{\circ}C$ for 30 minutes, the synthesized $TiO_2$ nanoparticles showed no significant changes of their shapes and crystalline phases. On the other hand, most of the commercial particles sintered with each other and changed to the rutile-phase. Based on the result of XRD analysis it is believed that the flame-synthesized $TiO_2$ nanoparticles have higher thermal stability at $800^{\circ}C$ than the commercial particles.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.89-94
• /
• 2009

The influence on a stability of thermal plasma has been investigated in an electrode structure of non-transferred plasma torch. The variations of dynamic characteristic of the arc voltage was analyzed and compared in terms of voltage character and nozzle types for both the step-shaped nozzles and magnetic-approved cylindrical nozzle. From the experimental results, an electrode gap, flow rate of arc gas, and currents are considered as major operational parameters. As conclusion, it was assured that a torch with step-shaped nozzles of magnetic-approved type produce the stable plasma jet.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1064-1069
• /
• 2010

Thin films have been used in a large variety of technological applications such as solar cells, optical memories, photolithographic masks, protective coatings, and electronic contacts. If thin films experience frequent temperature changes, thermal stresses are generated due to the difference in the coefficient of thermal expansion between the film and substrate. Thermal stresses may lead to damage or deformation in thin film used in electronic devices and micro-machined structures. Thus, knowledge of the thermomechanical properties of thin films, such as the coefficient of thermal expansion, is an important issue in determining the stability and reliability of the thin film devices. In this study, thermal cycling of Cu and Ag thin films with various microstructures was employed to assess the coefficient of thermal expansion of the films. The result revealed that the coefficient of thermal expansion (CTE) of the Cu and Ag thin films increased with an increasing grain size. However, the effect of film thickness on the CTE did not show a remarkable difference.

• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.72-76
• /
• 2006

고분자/점토의 nanocomposite는 고분자에 소량의 점토를 첨가해도 물리적, 기계적, 열적 특성이 증가하기 때문에 최근 이에 관련된 연구가 증가되고 있다. 특히 montmorillonite(MMT)와 같은 smectite 계열의 점토는 높은 종횡비, 판형의 층상구조, 경제성 때문에 산업적으로 이용가치가 많다고 할 수 있다. 본 연구에서는 PE/MMT nanocomposite는 고분자를 용융시킨 후 점토를 삽입하여 시편을 제조하였다. 나노입자의 구조는 XRD 및 TEM을 이용하여 확인하였고, 난연성은 LOI, 탄화층 생성량, 연기중량농도의 측정을 통하여 검토하였다. 또한 PE/MMT nanocomposite의 열적 안정성은 DTG-DTA 분석을 통하여 검토하였다. 그 결과 종래의 화합물보다 그 특성이 보강되었다. 난연성은 연소시 탄화층 형성에 의하여 증가 되었음을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.434-439
• /
• 2009

This study investigates the thermal properties of nanocomposites prepared from poly(lactic acid) (PLA), wood flour (WF) and montmorillonite (MMT) by melt compounding with a twin screw extruder. In order to enhance the mechanical properties of PLA/WF composites, maleic anhydride grafted PLA (MAPLA) is synthesized as a compatibilizer. MAPLA prepared in the laboratory is characterized using FR-IR. From SEM microphotographs, the presence of MAPLA has a positive effect on the mechanical properties of WF-reinforced PLA composites. The addition of WF/MAPLA into neat PLA increased the glass transition temperature ($T_g$). The addition of 1 to 5 wt% MMT into PLA/WF/MAPLA composite decreases the $T_g$. The cold crystallization temperature ($T_{cc}$) was decreased by the addition of MMT. The MMT could act as effective nucleating sites of PLA crystallization. The thermal stability evaluated by thermogravimetric analysis (TGA) is improved with the contents of MMT up to 3 wt%.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.532-536
• /
• 2005

Thermal shock resistance of structural ceramics is a property that is difficult to quantity, and as such is usually expressed in terms of a number of empirical resistance parameters. These are dependant on the conditions imposed, but one method that can be used is the examination of density, Young's modulus and thermal expansion retention after quenching. For high temperature applications, long-annealing thermal durability, cycle thermal stability and residual mechanical properties are very important if these materials are to be used between $1000^{\circ}C$ and $1300^{\circ}C$. In this study, an excellent thermal shock-resistant material based on $Al_2TiO_5-mullite$ composites of various compositions was fabricated by sintering reaction from the individual oxides and adjusting the composition of $Al_2O_3TiO_2/SiO_2$ ratios. The characterization of the damage induced by thermal shock was done by measuring the evolution of the Young's modulus using ultrasonic analysis, density and thermal expansion coefficients.

• 접착 및 계면
• /
• 제18권2호
• /
• pp.68-74
• /
• 2017

에폭시 수지는 우수한 열적, 기계적, 화학적 성질로 인해 다양한 분야에서 널리 사용되고 있으며, 에폭시 수지의 기계적 물성을 향상시키기 위한 많은 소재와 함께 혼합하여 사용하고 있다. 에폭시 조성물의 경화 후 기계적 물성의 향상을 위해서 에폭시 수지에 다양한 소재를 혼합하는데, 나노소재중에서는 CNT가 가장 많이 사용되고 있다. 하지만 CNT는 제조 공정 및 제조 비용적인 측면에서 한계점이 있기 때문에 천연적으로 산출되는 HNT에 대한 관심이 모아지고 있다. 본 연구에서는 두 종류의 실란으로 각각 처리된 HNT가 함유된 에폭시 조성물의 열적 기계적 물성에 대해서 조사하였다. 실란처리 된 HNT를 다양한 함량으로 제조하여 에폭시 조성물에 첨가한 후 금형몰드에서 경화시키고 만능재료시험기를 이용하여 기계적 물성을 측정하였으며, differential scanning calorimeter (DSC) thermogravimetric analysis (TGA) thermomechanical Analysis (TMA) 등의 장비를 이용하여 다양한 열적 특성을 측정하였다. 위의 실험 결과, 두 종류의 실란 화합물 중 아민으로 HNT를 표면 처리하였을 경우, 이를 포함하는 에폭시 조성물의 인장강도가 에폭시 실란으로 처리된 HNT를 포함하는 에폭시 조성물 보다 높은 것을 보였다. 또한 치수 안정성 비교를 위한 thermomechanical analysis 실험에서 얻은 선형 열팽창계수는 아민계 실란으로 처리한 HNT 조성물이 65 ppm으로 처리하지 않은 HNT 보다 낮은 값을 갖는 것을 보였다.

• Composites Research
• /
• 제18권4호
• /
• pp.14-20
• /
• 2005

방향족아민 경화제의 벤젠링 사이의 관능기 변화가 반응특성, 기계적특성 및 열적특성에 미치는 영향을 고찰하기 위하여 범용 에폭시수지인 DGEBF와 방향족아민 경화제 DDM, DDS 각각을 1:1의 당량비로 혼합하여 동일한 조건으로 경화하였다. 그 결과 에폭시수지 경화물의 특성은 경화제의 벤젠링 사이의 관능기 구조에 따라 매우 큰 영향을 받았다. 즉, 벤젠링 사이에 길이가 길고 bulky한 술폰기를 포함한 DDS는 반응성, 열안정성, 밀도, shrinkage($\%$), 선팽창계수, 인장탄성율. 인장강도, 굴곡탄성율, 굴곡강도의 값이 벤젠링 사이에 메틸기를 가지는 DDM 경화물계 보다 높게 나타났지만, epoxide기의 전환율, 유리전이온도의 값은 낮게 나타냈다. 이것은 술폰기의 강한 전기음성도와 메틸기의 전기 양성적인 repulsive한 성질의 차이에 의한 영향인 것으로 판단된다. 굴곡 파단면의 관찰 결과는 DDS 경화물계의 각개 grain이 불규칙적으로 분포되어 있음을 확연하게 보여준다.

• Computers and Concrete
• /
• 제31권2호
• /
• pp.139-149
• /
• 2023

This article investigates the statically analysis regarding the thermal buckling behavior of a nonuniform small-scale nanobeam made of functionally graded material based on classic beam theories along with the nonlocal Eringen elasticity. The material distribution of functionally graded structures is composed of temperature-dependent ceramic and metal phases in axial and thickness directions, called two-dimensional functionally graded (2D-FG). The partial differential (PD) formulations and end conditions are extracted by using to the conservation energy method. The porosity voids are assumed in the nonuniform functionally graded (FG) structure. The thermal loads are in the axial direction of the beam. The extracted nonlocal PD equations are also solved by employing generalized differential quadrature method (GDQM). Last but not least, the information acquired is used to produce miniature sensors, providing a unique perspective on the growth of nanoelectromechanical systems (NEMS).

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.797-805
• /
• 2013

In this paper vibration and stability analysis of laminated composite shells based on the first order shear deformation theory(FSDT) for two different boundary conditions(clamped-clamped, simply supported) are performed. Structural model of cross-ply symmetric laminated composite cylindrical shells subjected to a combination of magnetic and thermal fields is developed via Hamilton's variational principle. These coupled equations of motion are based on the electromagnetic equations(Faraday, Ampere, Ohm, and Lorenz equations)and thermal equations which are involved in constitutive equations. Extended Galerkin method is adopted to obtain the discretized equations of motion. Variations of dynamic characteristics of composite shells with applied magnetic field, temperature gradient, laminate thickness-ratio and radius ratio for two boundary conditions are investigated and pertinent conclusions are derived.