• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.327-332
• /
• 2021

Lithium-ion batteries (LIBs) have become a main energy storage device in various applications, such as portable appliances, renewable energy facilities, and electric vehicles. However, the poor thermal stability of LIBs may cause explosion or fire. The thermal runaway is the result of a failure of the separator inside LIB. Damages like tearing, piercing, and collapsing of the separator were simulated in a mechanical, an electrical, and a thermal way, and small discharge pulses of a few mV were detected at the time of separator damages. From the experimental results, this paper provided a method that can identify the separator failure before thermal runaway in the aspect of a potential explosion and fire prevention measures.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.30-38
• /
• 2005

Sulfur-cured gum natural rubber vulcanizates were devulcanized using two different concentrations of diallyl disulfide. The devulcanization process was performed at $110^{\circ}C$ min in an open two-roll cracker-cum-mixing mill. Natural rubber vulcanizates having various sulfur/accelerator ratios were used to study the cleavage of monosulfide, disulfide, and polysulfide bonds. The properties of devulcanized natural rubber increased upon increasing the disulfide concentration and the mechanical properties of the revulcanized natural rubber increased upon decreasing the sulfur content in the original rubber vulcanizates. The scorch time and the maximum state of cure both increased when the ground vulcanizates were treated with higher amounts of disulfide. TGA and DMA were conducted to study the effects of the devulcanization on the thermal stability and the $T_g$ behavior of the vulcanizates. SEM analysis was conducted to study how the failure mechanism was affected by the devulcanization process. It was possible to recover $70-80\%$ of the original gum rubber properties by using this process. From IR spectroscopic analysis, we observed that the oxidation of the main chains did not occur during high-temperature milling.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.119-126
• /
• 2004

In this study, the influence of silane coupling agents, featuring different organo-functional groups on the interlaminar and thermal properties of woven glass fabric-reinforced nylon 6 composites, has been by means of short-beam shear tests, dynamic mechanical analysis, scanning electron microscopy, and thermogravimetric analysis. The results indicate that the fiber-matrix interfacial characteristics obtained using the different analytical methods agree well with each other. The interlaminar shear strengths (ILSS) of glass fabric/nylon 6 composites sized with various silane coupling agents are significantly improved in comparison with that of the composite sized commercially. ILSS of the composites increases in the order: Z-6076 with chloropropyl groups in the silanes > Z-6030 with methacrylate groups> Z-6020 with diamine groups; this trend is similar to that of results found in an earlier study of interfacial shear strength. The dynamic mechanical properties, the fracture surface observations, and the thermal stability also support the interfacial results. The improvement of the interfacial properties may be ascribed to the different chemical reactivities of the reactive amino end groups of nylon 6 and the organo-functional groups located at the ends of the silane chains, which results from the increased chemical reactivity in order chloropropyl > methacrylate > diamine.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.183-188
• /
• 2003

The dielectric constants of fluorine-containing epoxy resins, 2-diglycidylether of benzotrifluoride(FER)/4,4'-diamino-diphenyl methane (DDM) and diglycidylether of bisphenol-A (DGEBA)/DDM systems were evaluated by dielectric spectrometer. Glass transition temperature and thermal stability factors, including initial decomposed temperature, temperatures of maximum rate of degradation, and decomposition activation energy of the cured specimens were investigated by dynamic mechanical analysis and thermogravimetric analysis. For the mechanical properties of the casting specimens, the fracture toughness, flexural, and impact tests were performed, and their fractured surfaces were examined by scanning electron microscope. The dielectric constant of FER/DDM system was lower than that of commercial DGEBA/DDM system, and the mechanical properties of the cured specimens showed higher values than those of DGEBA/DDM system. This was probably due to the introduction of trifluoromethyl (CF$_3$) group into the side chain of the epoxy resins, resulting in improving the electric and mechanical properties of the epoxy cure system studied.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.237-242
• /
• 2012

Spaceborne pulse tube-type cryogenic compressors are widely used for space applications. To guarantee cooling performance of the compressor, mission life time and micor-vibration stability, suitable thermal control of compressor is required. Micro-vibration of the compressor is the one of the sources to degrade the pointing performance of observation satellite. In the present work, on-orbit thermal design of compressor in order not to degrade the performance of micro-vibration isolation system keeping the thermal control performance has been proposed and investigated through thermo-mechanical analysis.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.632-636
• /
• 2005

In this work, the effect of chemical treatments on surface properties of SiC was investigated in thermal and mechanical interfacial behaviors of SiC/PMMA nanocomposites. The acid/base value, contact angles, and FT-IR analysis were performed for the study of surface characteristics of the SiC studied. The thermal stabilities of the SiC/PMMA nanocomposites were investigated by thermogravimetric analysis (TGA). Also the mechanical interfacial properties of the composites were studied in critical stress intensity factor ($K_{IC}$) and critical strain energy release rate ($G_{IC}$) measurements. As a result, the acidically treated SiC (A-SiC) had higher acid value than that of untreated SiC (V-SiC) or basically treated SiC (B-SiC). The acidic solution treatment led to an increase in surface free energy of the SiC, mainly due to the increase of its specific component. Thermal and mechanical interfacial properties of the SiC/PMMA nanocomposites, including initial decomposition temperature (IDT), $K_{IC}$, and $G_{IC}$ had been improved in the acidic treatment on SiC. This was due to the improvement in the interfacial bonding strength, resulting from the acid-base interfacial interactions between the fillers and polymeric matrix.

• Journal of Adhesion and Interface
• /
• v.5 no.1
• /
• pp.3-11
• /
• 2004

In this work, the cure behaviors of the DGEBA/PMR-15 blends initiated by N-benzylpyrazinium hexafluoroantimonate (BPH) as a cationic latent catalyst were performed in DSC and DMA analyses. And, the thermal stabilities were carried out by TGA analysis and their mechanical interfacial properties of blends were measured in the context of critical stress intensity factor ($K_{IC}$). As a result, the curing activation energy ($E_a$) determined from Ozawa's equation in DSC and the relaxation activation energy ($E_r$) from DMA were increased with increasing PMA-15 content. Also, the thermal stabilities obtained from the integral procedural decomposition temperature (IPDT) and the glass transition temperature ($T_g$) were highly improved with increasing the PMR-15 content, which were probably due to the high heat resistance. And, the $K_{IC}$ showed a similar behavior with $E_a$, which was attributed to the improving of the interfacial adhesion or hydrogen bondings between intermolecular chains.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.176.1-176.1
• /
• 2011

세계적으로 석유 기반 자원의 고갈에 따른 부족, 기후변화협약 및 환경규제 강화에 의해 세계적으로 바이오소재를 이용하고자 하는 연구와 더불어 유리강화복합재료의 대체물질로 적합한 천연섬유를 보강재로 사용하는 바이오복합재료의 연구 또한 활발하게 진행되고 있다. 최근 새로운 신재생에너지원으로 각광 받고 있는 바이오에너지 중 해조류는 가장 자연친화적이고 생산력이 뛰어난 바이오매스로 알려져 있다. 해조류는 바닷물 속에 녹아 있는 탄소를 흡수할 뿐만 아니라 광합성을 통해서도 탄소를 흡수하면서 성장하기 때문에 탄소흡수원의 역할을 하게 되며, 해조류 바이오에너지를 생산할 경우 화석연료를 대체하여 지구온난화의 주범인 온실가스를 감축하는 기능을 한다. 본 연구에서는 해조류를 이용한 바이오에너지 생산 공정에서 2차적으로 발생하는 부산물을 보강재로 사용한 바이오복합재료의 제조와 제조된 바이오복합재료의 열적 특성 및 동역학적 특성을 분석하였다. 해조류 부산물의 화학적 전처리에 따른 Thermogravimetric analysis(TGA) 분석 결과로 cellulose 함량이 가장 높고 불순물이 적은 황산 처리한 파래를 이용해 파래/Polypropylene(PP) 바이오복합재료를 다양한 보강비율 (20-50wt%)로 압축성형 하였다. 파래/PP 바이오복합재료의 저장탄성률은 파래 함량이 40wt%일 때 4.0 Gpa으로 최대값을 보였으며 이는 PP 매트릭스와 비교했을 때 약 8.1% 향상된 결과이다. 파래/PP 바이오보합재료의 열팽창 특성은 파래 함량이 증가함에 따라 열팽창계수가 낮아지는 경향으로 50wt%일 때 가장 낮은 값을 나타내었으며 이는 PP 매트릭스와 비교했을 때 약 56% 향상된 결과이다. 따라서 비생분해성 고분자에 새로운 신재생 바이오매스인 해조류를 보강재로 사용하여 열적 특성 및 동역학적 특성이 향상된 친환경적인 바이오복합재료의 제조 가능성을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.251-251
• /
• 2009

The generation of energy and the cooling of system using thermoelectric semiconductor material have been in spotlight. Thermoelectric effect increases with the decrease of the thermal conductivity. In the thermoelectric devices, thermal conductivity is related to phonon scattering. Therefore, few studies have been conducted in the thermoelectric materials dispersed nano oxide particle for increasing the phonon scattering. However, core-shell structure which nano particle disperses in solvents and then which thermoelectric materials coated on the nano oxide particles has not been reported. In this study, we selected commercial nano powder such as $Al_2O_3$. This nano particle was about 20nm and was crushed aggregate by mechanical treatment. We have developed the effect of the dispersant and the solvent. The properties of particles were evaluated by SEM, TEM, particle size analysis, and BET. Dispersion and dispersion stability were evaluated by electronic microscope and turbidity.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.2
• /
• pp.126-132
• /
• 2018

For the first time, an innovative approach using P(VDF-TrFE) as a polymer electrolyte for high efficiency, all-solid-state supercapacitors is presented. The polymer electrolyte was successfully achieved by dissolving P(VDF-TrFE) copolymers in dimethylformamide (DMF). Thermal analysis and infrared spectroscopy revealed excellent thermal stability up to $400^{\circ}C$ and copolymer's interaction with DMF. Electrochemical capacitors fabricated using P(VDF-TrFE) in DMF and ZnO NWs demonstrated high capacitive performance. Furthermore, the gel electrolyte-based supercapacitors demonstrated excellent mechanical durability up to a bend angle of $120^{\circ}$. Novel P(VDF-TrFE) electrolytes could be a promising approach for applications in flexible, fabric-based, and high-efficiency energy devices.