• 제목/요약/키워드: Thermal noise

검색결과 546건 처리시간 0.034초

350MW급 화력 발전소 증기터빈의 오일 휩 현상 및 대책 (Oil Whip Phenomena and Countermeasure on Steam Turbine in 350MW Load Thermal Power Plant)

  • 구재량;김연환;배용채;김계연
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.1015-1019
    • /
    • 2001
  • There are several bearing systems at the large steam-turbines in thermal power plant. The bearing system is one of the most important parts of rotating machinery. The steam turbine vibrations mainly depend on the bearing oil and the shaft alignment condition. This paper describes on the steam turbine abnormal vibration due to the oil whip in terms of the shaft alignment in the thermal power plant.

  • PDF

Analytical Noise Parameter Model of Short-Channel RF MOSFETs

  • Jeon, Jong-Wook;Park, Byung-Gook;Lee, Jong-Duk;Shin, Hyung-Cheol
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권2호
    • /
    • pp.88-93
    • /
    • 2007
  • In this paper, a simple and improved noise parameter model of RF MOSFETs is developed and verified. Based on the analytical model of channel thermal noise, closed form expressions for four noise parameters are developed from proposed equivalent small signal circuit. The modeling results show a excellent agreement with the measured data of $0.13{\mu}m$ CMOS devices.

부분대역 재밍하에서 리미터-변별기 검파와 Integrate-and-Dump 펄터링을 고려한시스템의 성능 분석 (Analyzed the performances for system withlimiter discriminator detection and integrate and dump post detection filtering)

  • 이봉수;이사원
    • 한국컴퓨터정보학회논문지
    • /
    • 제3권4호
    • /
    • pp.78-85
    • /
    • 1998
  • 본 논문에서는 열잡음과 부분대역 재밍하에서 리미터-변별기 검파와 Integrate - and - Dump 필터링을 고려한 FH/CPFSK시스템의 성능을 분석하였고, 시스템을 평가하는데 있어서 인접한 8개의 Bit 패턴에 대한 심볼간 간섭과 차분위상, FM잡음 클릭을 고려하였다. 그 결과, 최적의 변조지수 h는 0.7이었고, 대역폭과 시간의 곱 D는 1.0이었으며, 부분대역 재밍하에서 열잡음을 고려했을 때, 대략 20dB 이하에서는 시스템의 오류확률에 중대한영향을 미쳤으나 20dB 이상에서는 무시할 수 있었다.

  • PDF

PMV와 음환경의 복합 작용이 실내 환경 지각에 미치는 영향 (Combined Effects of PMV and Acoustics on Indoor Environmental Perception)

  • 양원영
    • KIEAE Journal
    • /
    • 제16권6호
    • /
    • pp.135-142
    • /
    • 2016
  • Purpose: The purposes of this paper are to investigate effects of indoor thermal environment on acoustical perception and effects of acoustics on indoor thermal perception, and to understand basic human perception on indoor environment. Method: Subjective assessment was performed in an indoor environmental chamber with 24 university students. Thermal conditions with PMV -1.53, 0.03, 1.53, 1.83 were simulated with a VRF system, a humidifier, a dehumidifier, and a ventilation system. Six noise sources - Cafe, Fan, Traffic, Birds, Music, Water- with sound levels of 45, 50, 55, 60 dBA were played for 2 minutes in random order. Temperature sensation, temperature preference, humidity sensation, humidity preference, noisiness, loudness, annoyance, and acoustic preference were assessed using bipolar visual analogue scales. The ANOVA and Turkey's post hoc test were used for data analysis. Result: Thermal environmental perceptions were not altered through 2 minutes noise exposure. Acoustical perceptions were altered by thermal conditions. The results were consistent with previous papers, however, the noise exposure time should be carefully considered for further development.

바크하우젠 노이즈 해석에 의한 재료의 열화도 평가 (Degradation Estimation Of Material by Barkhausen Noise Analysis)

  • 이명호
    • 한국공작기계학회논문집
    • /
    • 제14권3호
    • /
    • pp.38-46
    • /
    • 2005
  • The destructive method is reliable and widely used for the estimation of material degradation but it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials used at high temperature by nondestructive evaluation such as electric resistance method, replica method, Barkhausen noise method, electro-chemical method and ultrasonic method are strongly desired. In this study, various nondestructive evaluation(NDE) parameters of the Barkhausen noise method, such as MPA(Maximum Peak Amplitude), RMS, IABNS(Internal Area of Barkhausen Noise on Signal) and average amplitude of frequency spectrum are investigated and correlated with thermal damage level of 2.25cr-1.0Mo steel using wavelet analysis. Those parameters tend to increase while thermal degradation proceeds. It also turns out that the wavelet technique can help to reduce experimental false call in data analysis.

추적 레이더에서 적응형 확장 칼만 필터의 성능 분석 (Performance Analysis of Adaptive Extended Kalman Filter in Tracking Radar)

  • 송승언;신한섭;김대오;고석준
    • 대한임베디드공학회논문지
    • /
    • 제12권4호
    • /
    • pp.223-229
    • /
    • 2017
  • An angle error is a factor obstructing to track accurate position in tracking radars. And the noise incurring the angle error can be divided as follows; thermal noise and glint. In general, Extended Kalman filter used in tracking radars is designed with considering thermal noise only. The Extended Klaman filter uses a fixed measurement error covariance when updating an estimate state by using ahead state and measurement. But, a noise power varies according to the range. Therefore we purposes the adaptive Kalman filter which changes the measurement noise covariance according to the range. In this paper, we compare the performance of the Extended Kalman filter and the proposed adaptive Kalman filter by considering KSLV-I (Korean Satellite Launch Vehicles).

열공급 보일러 배가스 열교환기 덕트에서 발생하는 과도 소음 현상 (Flow-Induced Noise and Vibration Due to von Karman Streets in Tube-Bank Ducts of Gas Air Heat Exchangers)

  • 김연환;구재량;배용채;이현;김성휘
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.339-345
    • /
    • 2002
  • When a flow passes a series of parallel ones, vortexes will be formed in the wake after the cylinder. This paper treats the problems of vibration and noise in tube bank of gas flow duct of heat exchanger thermal suppling boiler in combine cycle thermal power plants. The boiler burner type has recently been changed to low Nox burner and begun commercial operation. After more load up operation then 70%, high level noise and vibration were generated at gas flow duct of heat exchanger.

  • PDF

3D Noise Reduction 방법에 기반한 열 영상 잡음 감쇠에 관한 연구 (A Study of Thermal Imaging Noise Reduction based on 3D Noise Reduction Method)

  • 김명광;김영길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.160-163
    • /
    • 2009
  • 최근 적외선 열 영상의 유용함이 발표되어감에 따라 이 기술에 대한 이해와 도입폭이 점진적으로 넓혀져 가고 있다. 국내는 물론 세계적으로 많은 제조, 개발 관련 업체들이 생겨나고 있으며, 업체들의 기술이 발전함에 따라 높은 온도 분해능과 해상도는 물론, 시스템 전체의 크기가 휴대가 가능할 정도로 소형화 되어가고 있는 추세이다. 이러한 열 영상 카메라에서 중요한 역할을 하는 적외선 열 감지 센서에서는 주변 온도, 대상 온도, 표면 온도 등의 측정 오차 및 열상 측정 소자의 온도, Bias 불안정 등의 매우 다양한 원인으로 인한 잡음이 발생하기 쉽다. 이러한 다양한 잡음의 감소는 해상도 및 온도 분해능의 향상과 직결되므로, 잡음을 줄이기 위한 많은 연구가 도처에서 행해지고 있다. 본 논문은 이러한 노력의 일환으로써 각각의 잡음 원인을 규명하지 않고 최종 열 영상 출력물에서 인접 프레임들의 비교, 혼합 하여 제거하는 3D Noise Reduction 기술을 이용해 노이즈를 감쇠하는 방법에 대해 연구하였다.

  • PDF

저궤도 지구관측위성의 광학탑재체 지지구조물 설계 연구 (A Study on the Optical Bench for LEO Earth Observation Satellite)

  • 김경원;김진희;이주훈;진익민;김종우
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.805-808
    • /
    • 2005
  • This paper is a study on an optical bench satisfying stiffness and thermal pointing error requirements for LEO earth observation satellite. According to shape and stiffness requirements, optical bench type 1 is designed. Because type 1 does not satisfy the thermal pointing error requirement, an optical bench type 2 is suggested. Although the type 2 has better results than type 1, it still does not meet the thermal pointing error requirement. Using the results of optical bench type 1&2, the optical bench type 3 is finally designed, which satisfies both the stiffness and thermal pointing error requirements.

  • PDF

협대역 능동소음 제어기법을 이용한 화력발전소 소음제어 (Narrowband Active Control of Noise in Thermal Power Plants)

  • 남현도;서성대;황정현
    • 조명전기설비학회논문지
    • /
    • 제15권5호
    • /
    • pp.34-40
    • /
    • 2001
  • 본 논문에서는 화력발전소 보일러 운전원 근무실 소음제어를 위하여 협대역 능동소음 제어시스템을 제안하였다. 제안된 시스템은 기준입력으로 구형파를 사용하여 기본파는 물론 고조파까지 한꺼번에 제어할 수 있게 하였으며, adjoint LMS 알고리즘을 사용하여 기존의 filtered-X LMS 알고리즘을 사용한 경우보다 계산량을 줄였다. 컴퓨터 시뮬레이션 결과, 기존의 광대역 능동소음 제어시스템에 비해 훨씬 작은 자수의 적응 필터를 사용하였으나, 더 우수한 특성을 보였다.

  • PDF