• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.601-604
• /
• 2008

Desktop PC CPUs have been significantly required to be the necessity of thermal management while they have satisfied the extensive data and graphic processing requirements. So the cooling systems assembled with heat pipes embedded in a metal cooling plate, and fins are widely used in the desktop PC markets. Due to a number of demands such as the confined space of desktop PCs, higher heat density of CPUs, and acoustic noise, however, there is the main drive to improve continuously cooling systems. This paper presents the flow and thermal behavior of the cooling system by using the computational fluid dynamics(CFD) code.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.437-444
• /
• 2004

To control algal bloom in reservoirs in Korea, artificial circulation systems have been applied. Diffuser block aeration systems have been increasingly used in Korean reservoirs especially for shallow ones. However, there has been no sound theoretical background for the design and operation of the system. Also there has not been sufficient post-installation studies to validate the effectiveness of the system. As a result, it has been repeatedly reported that the success of the system is not certain. Proper consideration on thermal stratification regimes of reservoirs and flow dynamics induced by bubble plumes are essential elements in design processes of the aeration system. This paper discusses the current methods in the design of diffuser type aeration system and suggests a new design method based on fluid mechanical theory. Example calculations were discussed using observed data of the Yeoncho Dam and it seems that the results represent the current situation successfully.

• 전기화학회지
• /
• 제4권4호
• /
• pp.152-159
• /
• 2001

전기자동차의 성능은 축전지의 성능에 의해 크게 좌우된다. 그러므로 우수한 성능과 높은 신뢰성을 가진 전기자동차를 개발하기 위해서는 다양한 운영조건에서 축전지가 최대의 성능을 가질 수 있게 잘 관리되어야 한다. 축전지의 성능 향상은 축전지 관리 시스템(BMS)의 적용에 의해 달성될 수 있으며 BMS는 축전지의 상태 감시뿐만 아니라 축전지의 충전 및 방전을 최적화하는 중요한 역할을 수행한다. 이 연구에서는 전기자동차에 적용된 니켈 메탈하이드라이드 전지(Ni/MH battery) 이용을 최대화하기 위한 역할을 수행하는 BMS를 개발하였다 이 시스템은 축전지의 충전 및 방전 제어, 과충전 및 과방전 방지, 잔존용량 계산 및 표시, 안전관리 및 열관리 등의 기능을 가진다. 금번 개발된 BMS를 대우자동차와 고등기술원이 공동 개발한 DEV5-5전기자동차에 장착하여 시험을 수행하였다. 이 차량에는 파나소닉사의 12V-95Ah사양의 Ni/MH battery 18모듈이 적용되었다 시험결과 이 시스템은 $3\%$ 이내의 높은 정확성을 가지고 있으며 우수한 신뢰성을 나타내었다. 이 BMS는 전기자동차의 신뢰성과 안전도뿐만 아니라 Ni/MH battery pack의 성능과 수명을 향상시킬 것이다.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.21-25
• /
• 2013

The purpose of this study is to provide basic data for the safety assessment of a water purifier when water leaks due to inappropriate maintenance and the examination of the cause of accidents related to the leak. Due to its inspection and management by non-specialists, if a leak occurs in a water purifier with the water level controller being inclined, it may result in the failure of the compressor, power supply line, PCB, etc. The analysis of the thermal diffusion pattern of water purifier compressors using a thermal image camera shows that its maximum temperature was approximately $80^{\circ}C$. In addition, its operating current was a maximum of 13 A and the system's operating current was approximately 1.7 A after the compressor was charged. It was found that the housing type power cable cover of the compressor had the effect of preventing electric shock but has poor flame resistance. Furthermore, the performance of the overload protector, PTC relays, etc., was excellent but they have potential for problems as metallic terminals were exposed, resulting in the potential of a safety related accident. The terminals and their surface damaged by the tracking showed a trace of carbonization and the resistance between terminals was measured to be approximately $8{\Omega}$. In addition, while the tracking was proceeding, the fuse and circuit breaker installed for system protection did not operate.

• Tribology and Lubricants
• /
• 제34권2호
• /
• pp.43-48
• /
• 2018

This paper presents the thermohydrodynamic analysis of tilting journal pad bearings supporting a power turbine rotor applied to a 250 kW super-critical $CO_2$ cycle. In the analysis, the generalized Reynolds equation and 3D energy equation are solved to predict oil film temperature and the 3D heat conduction equation is solved for pad temperature. The power turbine rotor is supported by two tilting pad bearings consisting of five pads with an oil supply block between the pads. Copper backing pads with higher thermal conductivity compared to steel backing pads are adopted to improve thermal management. The predicted maximum pad temperature is around $55^{\circ}C$ which is approximately $15^{\circ}C$ higher than oil supply temperature. In addition, the predicted minimum film thickness is 50 mm at a rotating speed of 5,000 rpm. These results indicate that there is no issue in the thermal behavior of the bearing. An operation test is performed with a power turbine module consisting of a power turbine, a reduction gear and a generator. Thermocouples are installed at the 75% position from the leading edge of the pad to monitor pad temperature. The power turbine uses compressed air at a temperature of $250^{\circ}C$ in its operation. The steady state pad temperatures measured in the test show good agreement with the predicted temperatures.

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.235-240
• /
• 2013

그래핀(Graphene)은 전기 전도성 및 열전도성이 우수하고 1 nm 수준의 초 박막 형 필름 소재를 제조할 수 있다는 장점으로 인하여, 차세대 트랜지스터 소자 및 디스플레이 장치에 적용 가능한 방열 소재로서 많은 연구가 활발히 진행되고 있다. 또한 CVD(chemical vapor deposition)제조법으로 합성된 그래파이트(Graphite)는 구조의 단순성 및 유연성 때문에 안정하고 열에 강한 탄소계 방열소재로 주목 받고 있다. 본 연구는 열전도도가 우수한 폼(foam)형태의 구리를 촉매로 상압과 진공에서의 CVD법을 이용하여 그래핀을 성장시킨 후 구리 폼의 기공 안에 다양한 종류의 그래파이트(Natural graphite, expandable(/expanded) graphite, etc)를 복합 및 안정화시켜 기존보다 높은 열전도도를 가지는 방열소재를 개발하였다. 제조된 금속폼/그래파이트 소재를 OM(optical microscopy)과 SEM(scanning electron microscopy)을 이용하여 표면을 확인하였고 DSC(Differential Scanning Calorimetry), 아르키메데스 법을 활용한 비열, 밀도 결과를 확보하였다. 또한 LFA(Laser Flash Analysis)를 이용하여 열 확산계수 예측을 통한 열전도 특성을 평가하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권1호
• /
• pp.1-8
• /
• 2015

The stability of friction characteristics and thermal management for a dry type dual clutch transmission (DCT) are inferior to those of a wet clutch. Too high temperature resulting from frequent engagement of DCT speeds up degradation or serious wear of the pressure plate or burning of the clutch disk lining. Even though it is significantly important to estimate the temperature of a dry double clutch (DDC) in real-time, few meaningful study of the thermal model of DDC has been known yet. This study presented a thermal analytical model of lumped parameters for a DDC by analyzing its each component firstly. Then a series of experimental test was carried out on the test bench with a patented temperature telemetry system to validate the proposed thermal model. The thermal model, whose optimal parameter values were found by optimization algorithm, was also simulated on the experimental test conditions. The simulation results of DDC temperature show consistency with the experiment, which validates the proposed thermal model of DDC.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.167-174
• /
• 2014

Heating and air conditioning system is changing rapidly from the traditional HVAC central supply system to the individual supply system with electrical heat pump system (EHP) in Korean school buildings. The individual supply system has advantages to turn on and off individually and to adjust the thermal comfort separately, but energy is wasted in the unoccupied classroom when the last leaving occupant does not turn off the controller. If the controller is to be off automatically while the classroom is not in use, energy consumption would decrease dramatically. This project aims to cease the unnecessary EHP supply in vacant classroom by inputting the class schedule from the central control room to reduce the energy-spending. Experimental measurements were carried out between the controlled classroom that is turned off when not in use and the uncontrolled room that is turned on continually. Occupant's comfort and energy consumption were measured and compared between the controlled case and the uncontrolled case. The energy consumption of controlled classroom case is 30-60% less than that of the uncontrolled classroom case. This result shows that controlling the cooling supply for the unoccupied classroom using the class schedule can decrease the energy consumption remarkably. This supply control system can be used to conserve energy in school structures like universities.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.13-17
• /
• 2008

In this paper, in order to get the characteristics of the lithium secondary cell, such as charge and discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc, we build a thermal model that estimate the impedance of battery by experiment & simulation. In this one-dimensional model, Seven governing equations are made to solve seven variables c, $c_s,\;\Phi_1,\;\Phi_2,\;i_2$, j and T. The thermal model parameters used in this model have been adjusted according to the experimental data measured in the laboratory. The result(Voc, Impedance) of this research can be used in BMS(Battery Management System), so an efficient method of using battery is developed.

• 한국건설관리학회논문집
• /
• 제16권5호
• /
• pp.65-76
• /
• 2015

해외 플랜트 사업에서의 고부가가치를 창출하기 위해서는 기획 타당성조사, 프로젝트종합관리, FEED 및 기본설계 등 분야의 기술경쟁력 강화가 시급하다. 특히, FEED 업무는 프로젝트 전체에 대한 영향력이 절대적이고, 또한 기자재 및 패키지 산업의 경쟁력 강화에도 결정적 역할을 한다. 그럼에도 불구하고, FEED 관련 선행연구들은 설계업무 중심의 프로세스 및 성과물을 위한 연구가 대부분이며, 프로젝트 전체에 영향을 미치는 관리적 관점의 FEED 업무에 대한 연구는 미흡한 실정이다. 따라서 본 연구에서는 발전플랜트 중 화력발전소를 대상으로 사업관리 관점의 FEED 업무 프로세스 구조 및 항목을 제안하였다. 도출된 FEED 관리 업무는 3개의 레벨로 나누어진 계층적 구조를 가지고 있으며, 업무 항목에 대한 전문가 검증을 실시하였다. 또한 FEED 관리 업무에 대한 평가지표별 평가를 통해 결과를 분석한 결과 설계 중심의 업무들은 역량이 높지만 중요도가 높은 관리적 관점의 FEED 업무들의 역량은 부족한 것으로 나타났다. 그러므로 본 연구에서 제안한 FEED 관리업무 프로세스 구조는 FEED 역량 강화를 위한 가이드라인이 될 것이라 기대한다.